JDAM used in Waco, Texas?

By Motoko.
in It's a Conspiracy!

 Share

Recommended Posts

Veteran

siah1214

Posted
Posted

Yes, the government decided to use a smart bomb on a fertilizer factory in a small town (not ****ING WACO, it WASN'T IN WACO, STOP SAYING IT WAS IN ****ING WACO), to take out WHAT exactly?

What are they trying to destroy? A fertilizer factory that's already on fire? Are you serious?

Please move this to jokes and funny stuff, the whackjobs aren't even trying anymore.

Grand Master

HawkMan

Posted
Posted

Didn't watch the video, but people mentioned a trail. Either someone don't know what a JDAM is or... well I don't know.

but how exactly does a guided free fall bomb leave a trail ?

http://en.wikipedia.org/wiki/Joint_Direct_Attack_Munition

so after watching the video, it's just someone who doesn't know how an explosion works.

Grand Master

neufuse Veteran

Posted
  • Veteran
Posted

good freaking gawd, do we need a conspiracy theory for everything anymore? oh heck I'll start.... a place burn down around me, was the largest fire in the history of the town, caused almost $100 million in damage, it obviously was the military doing it using controlled explosions to take the plant down all at once...... *rolls eyes* good gawd

Grand Master

neufuse Veteran

Posted
  • Veteran
Posted

If not a missile then why does the video show a bright light outside the building heading inwards towards the building just before it explodes?

why in the world would the gov even have a reason to send a guided missile at a fertilizer factory? it makes no sense at all, the darn place caught on fire, it just happened to make fertilizer, and the process they use just happens to be highly volatile... and they just happen to stockpile it you know being a factory at the site... and it just happens that getting this stuff wet in large quantities can cause it to vaporize which drastically increases the chance it could explode catastrophically

Grand Master

HawkMan

Posted
Posted

Because that was the direction of the explosion, it wasn't centered on the flames you see earlier. like if you watch a slow motion recording of gas exploding in a glass box, it doesn't all explode at once, it flashes from one side to the other, THEN it explodes depending on the material, that's what you see there, the gas flashing/burning.

Had it been a missile you wouldn't have seen it at all. depending on the missile the flame would be to mall to see, or it would have shut off the engine before it struck anyway.

Grand Master

#Michael

Posted
Posted

I heard that Chuck Norris walked out of the explosion completely unharmed with a BOSEG on his face and a cigar in his mouth. :shiftyninja:

I heard chuck norris needed something to do with all of his toothpicks

http://www.memecenter.com/fun/1304303/chuck-norris-toothpicks

Seriously though....this whole thread is a joke.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft Edge gets tons of security features, including AI model that can see your screen

      By WaltC · Posted

      Just another reason (aside from many others) not to use Edge. Firefox 153.0b5 DEx64 has a similar feature added recently in prior builds that I will turn off at some point when I get around to it. It's the new "Something looks suspicious" page that pops up here and there. It cleverly hides itself between web pages that I've actually visited; as a result, you know, of selecting a web page and telling the browser where to go. The interesting thing is that it does not produce these warnings from pages that I, as the only intelligent user of the browser in my system, have ever directed the browser to open! What seems to be happening is that the browser looks at all the goofy ad links on a web page I do actually open and selects one that "looks suspicious" and then creates the "something looks suspicious" web page, which is neatly inserted, as mentioned, between web pages my RB ("real brain") has directed the browser to load in a session. The thing is, I usually look at links I am considering to follow before I ask the browser to load them, and in cases I have noticed where the link does indeed look suspicious, most of the time I will choose to not follow the link at all. Doesn't everyone do this or something similar? I am picky about what I voluntarily load... (I don't like links that start off fine, with a site designaiton that seems normal enough but then is followed by indecipherable alphanumeric strings many, many lines long, etc. I tend to reject those because they look suspicious. They may not be, but I don't care... I'll stay with Firefox, of course, if for no other reason than they usually let you turn off the junk you don't like. And because it isn't Edge... But at some point Microsoft will come to realize that putting your bookmarks on the left side is a Good Thing for a lot of people, just as Microsoft discovered when it had the bright idea of nailing the Windows taskbar to the bottom of the screen, when for decades Microsoft browsers had left that placement up to the user. They have finally reversed the obscenity of that decision. Finally.
    • Google's new hand-wave reCAPTCHA can be bypassed with a stock photo

      By Ccl Ncc · Posted

      Google was using the old CATPCHAs data to train their LLMs. What is the say they won't use this camera data of users to train their LLM? these companies need some strict regulations!
    • How do you future-proof a home or small office network?

      By Mindovermaster · Posted

      Depends on what you need. Might be a bit clearer on what you plan to do with it. Sort of a waste if you get the newest and greatest, but don't know how to use it.
    • NTLite 2026.06.11200

      By Copernic · Posted

      NTLite 2026.06.11200 by Razvan Serea NTLite is a Windows configuration tool that allows you to modify your existing Windows install or an image yet to be deployed, remove Windows components, configure and integrate, speed up the Windows deployment process. Reduce Windows footprint on your RAM and storage drive memory. Remove components of your choice, guarded by compatibility safety mechanisms, which speed up finding that sweet spot. Windows Unattended feature support, providing many commonly used options on a single page for easy setup. Easily integrate a single or multiple drivers, update or language packages. Package integration features smart sorting, enabling you to seamlessly add packages for integration and the tool will apply them in the appropriate order, keeping hotfix compatibility in check. One of the important new features of NTLite (compared to its predecessors) is the ability to modify an already installed the operating system, by removing unnecessary components. Supports Windows 11, 10, 8.1 and 7, x86 and x64, live and image. Server editions of the same versions, excluding support for component removals and feature configuration. ARM64 image support in the alpha stage. Does not support Checked/Debug, Embedded, IoT editions, nor Vista or XP. NTLite 2026.06.11200 changelog: New Secure Boot Migration support: Verification, certificate staging, and boot-manager/sector update across the Image, Updates, Apply, and Create-ISO pages (2023 CA migration, optional 2011 revocation, Anti-rollback, Boot sector choice etc) Secure Boot Host Readiness: Live host Secure Boot migration monitor and Servicing-task control Option under Image page - C:\Windows row, or load the host as the target - Updates - Secure Boot Image: 'Sort mounted images first' option for the image list in Menu-Settings UI: Hover description card for Components and Unattended pages, selectable text and quick access to Compatibility options Command line: Relay commands into the already-running instance Enables controlling already running NTLite via ntlite.exe Use /NewInstance to launch an additional instance using CLI operations (premium) UI: 'New instance' option via main menu instead of a secondary ntlite.exe prompt Apply: Hide individual Apply-page notes with a per-note dismiss (X), critical excluded Settings: 'Unsigned RDP file launch warnings' tweak (RDP client), bypassing the April 2026 security-update prompt on RDP connections Upgrade Image: Live OS and deployed image editing now unlocked on free/test licenses, same licensing as images Image: 'Recompress' option in manual dialog Remove Editions to shrink the WIM in one session Image: SWM part size set inline on the Apply page and image dialogs, split-size popup retired Image: Relative 'Last change' dates; editions grouped by build time to reduce noise Image: 'Forget - Missing' on the Edit-cache menu to mass drop entries whose folder is gone Components: Root groups reorganized - user-facing groups first, system/critical last Components: Show filter options to view components by Template or App-type, since Apps are now merged into groups Presets: Delete confirmation now lists the multi-selected preset names UI: Design update propagated to the rest of the tool UI: Filter and search match words in any order and partially, better results filtering Components Unattended: Input-locale language derives from the user locale, with an independent keyboard picker, enables combinations previously unavailable Unattended: Input-locale now allows for a user value override Unattended: Localization OOBE WinPE now can be copied with the new WinPE Copy OOBE localization toggle, enter locale settings once for both stages Updates: Downloader greys and locks updates the image already carries (hotfix and MSIX) Updates: Resume interrupted update downloads Command line: Many upgrades, see /?, now prints help to the console or redirected output UI-Translation: Finnish language added, also thanks for Chinese Traditional (Matt), French (tistou77), Italian (clarensio), Russian (RDS), Swedish (1FF), Vietnamese (Vu Anh Vu) Fix Components: Containers removal breaking Apps deployment Components: Microsoft Account had leftovers when Easy Migrate is kept Image: Export to an existing WIM improvements, Append renamed to Merge Image: Improved 26H1 live removal support Image: No more 'X:\ not accessible' popup for certain drives during image scan Presets: Manual image refresh picks up presets added/removed outside the app Tweaks: Disabled visual-effect animations no longer return after first logon on a new profile Tweaks: Live Visual Effects toggles (animations, drag full windows, font smoothing) now apply correctly Download: NTLite 2026.06.11200 | 20.5 MB (Free, paid upgrade available) Link: NTLite Home Page | NTLite Features | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Politically funny images of the World

      By PsYcHoKiLLa · Posted

      Ah. La Fontana De Incontinentia ! Bella ! Bella !

  • Recent Achievements

    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
    • First Post
      carols23 earned a badge
      First Post
    • One Month Later
      Tom Willson earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      +Edouard
      257
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      93
    5. 5
      macoman
      67
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!