I-5 Bridge Collapes in Washington State over Skagit River


Recommended Posts

Interstate 5 bridge collapsed over Skagit River in Washington state dumping cars and trucks in to the water. There were no immediate reports of how many people were in the water or deaths or injuries.

Heres a link to the local news there

http://www.king5.com/news/local/Report-I-5-bridge-collapses-over-Skagit-River-cars-in-water-208758631.html?hpt=hp_t3

Heres a link to USA Today

http://www.usatoday.com/story/news/nation/2013/05/23/washington-skagit-river-bridge-collapse/2356801/?csp=fbfanpage

post-455563-0-63534300-1369366076.jpg

Is anyone really surprised about this? I remember reading a report about the barely passed grade that most of Louisiana's MAIN bridges are in.

We've got politicians that soak up an ungodly amount of money but we can't fix the roads and infrastructure here in this country. People are going to pay for with their lives over and over again...

  • Like 2

Is anyone really surprised about this? I remember reading a report about the barely passed grade that most of Louisiana's MAIN bridges are in.

We've got politicians that soak up an ungodly amount of money but we can't fix the roads and infrastructure here in this country. People are going to pay for with their lives over and over again...

Loss of life outside of natural causes is a terrible thing regardless, I'm sorry you feel the way you do, but why not simply confront those politicians? they need you more....

Is anyone really surprised about this? I remember reading a report about the barely passed grade that most of Louisiana's MAIN bridges are in.

We've got politicians that soak up an ungodly amount of money but we can't fix the roads and infrastructure here in this country. People are going to pay for with their lives over and over again...

This is an issue that's absolutely going to become more and more common. It's as inevitable and as gradual as ice melting outside on a hot day.

Many of California?s bridges are hitting their design life limit.

?There are about 2,000 bridges that are labeled structurally deficient,? said Exponent Senior Managing Engineer Vijay Saraf. ?A lot of our infrastructure was built in the ?40s and ?50s, so its life cycle is coming to an end,? explained Saraf.

http://transportationca.com/funding-shortage-leaves-structurally-deficient-bridges-without-repairs/

Loss of life outside of natural causes is a terrible thing regardless, I'm sorry you feel the way you do, but why not simply confront those politicians? they need you more....

Easier said than done... Ask the Newtown and Aurora families. As much as 90% of the American public supported background checks for new firearms purchases, and many of those families confronted the politicians face to face before their vote.

Why does everyone think this was bad bridge? I think we shouldn't to rush judgement. I realize its an old bridge but a truck could have hit the bridge and caused failure.

Whether or not this was a symptom of the problem, the problem is real, and this will be the result.

Whether it was or was not a bad bridge, with the fact that so many bridges in this country that are used everyday are known to be "bad", this should at least be a wake up call to the fact that this is what we will be seeing more and more frequently unless we repair and update our infrastructure.

Loss of life outside of natural causes is a terrible thing regardless, I'm sorry you feel the way you do, but why not simply confront those politicians? they need you more....

Loss of life is terrible, I agree.

I read my email alert and thought to my self, he's not from around here; sure enough I hop on and you're from the UK! :woot: The politicians don't need us anymore than they need a vote to do anything. They USED to work for the people, now we work for them. You can't even TALK to a politician without going through hoops to get a "maybe" towards a meeting. You have to be a lobbyist with a LOT of money to talk directly to them (lobbyist = legal bribing of course).

In America, you once could live Tax free, you can't do that anymore. You could be born and never hold a job, never buy anything or any property and still go to jail for not filing for taxes and not paying taxes.

If you don't like a restaurant you stop paying to go there - they shut down. If you don't like a politician and you stopped paying your taxes to make sure they get the point, well, you go to jail. I own a small business, I've gone a few rounds with the lovely government in this country.

Why does everyone think this was bad bridge? I think we shouldn't to rush judgement. I realize its an old bridge but a truck could have hit the bridge and caused failure.

I haven't seen very many trucks driving down the river :D . The bridge has a clean break on both sides and caves inward which means more than likely a pillar gave in at the center point.

MANY bridges in this country are beyond the point of safe, they are continually used regardless.

EDIT: For louisiana...

Roads, F.

Bridges, D-.

Safety, F.

Funding, D

Congestion, C.

http://www.drivinglouisianaforward.org/index.cfm?md=newsroom&tmp=detail&articleID=9&catID=2

As much as 90% of the American public supported background checks for new firearms purchases, and many of those families confronted the politicians face to face before their vote.

Please get your facts straight. Background checks are 100% required when purchasing from a federally licensed firearm seller (ie anything not private)

Why does everyone think this was bad bridge? I think we shouldn't to rush judgement. I realize its an old bridge but a truck could have hit the bridge and caused failure.

By the way...

The bridge was only "pretty bad", not "totally bad".

The Seattle Times reported that bridge was built in 1955 and was classified by the National Bridge Inventory as "functionally obsolete" in both 2000 and 2010. But it said the Washington Department of Transportation does not list it among its list of "structurally deficient bridges."

http://www.usatoday.com/story/news/nation/2013/05/23/washington-skagit-river-bridge-collapse/2356801/?csp=fbfanpage

"Functionally obsolete" means that the design of a bridge is not suitable for its current use, such as lack of safety shoulders or the inability to handle current traffic volume, speed, size, or weight.

http://en.wikipedia.org/wiki/National_Bridge_Inventory

Please get your facts straight. Background checks are 100% required when purchasing from a federally licensed firearm seller (ie anything not private)

That was kind of the point of the law... Hence the term "Expanded Background Checks", and the hubbub on that thing called the news, and the vote in the Senate.

Get your facts straight.

The failure of the background check proposal authored by Sens. Joe Manchin, D-W.Va., and Pat Toomey, R-Pa., now imperils the entire legislation. The proposal would have expanded background checks to gun shows and Internet sales while exempting personal transactions. The amendment was aimed at winning over reluctant conservatives, who were opposed to the more stringent background check plan in the existing bill.

http://www.foxnews.com/politics/2013/04/17/background-check-plan-in-trouble-as-dems-call-votes-on-gun-bill/

That was kind of the point of the law... Hence the term "Expanded Background Checks", and the hubbub on that thing called the news, and the vote in the Senate.

Get your facts straight.

As much as I think that it would help to have more efficient background checks, there's a system in place already that is currently flawed. They should fix what they have first before throwing more layers on top of it.

That was kind of the point of the law... Hence the term "Expanded Background Checks", and the hubbub on that thing called the news, and the vote in the Senate.

Get your facts straight.

Internet sales already require: shipping to a federally licensed dealer which also requires a background check for you to get the gun. Gun shows also require background checks done by licensed dealers.

Other than that, you can't regulate nor enforce private sales between 2 individuals. Get a clue.

Ooops. The State of Washington should definitely stay well away from building bridges. Terrible reputation going all the way back to the Tacoma Narrows disaster and the Floating Bridge that floated away.

Washington is a software state and shouldn't meddle with all this hardware stuff.

Why does everyone think this was bad bridge? I think we shouldn't to rush judgement. I realize its an old bridge but a truck could have hit the bridge and caused failure.

We have a winner! :woot:

http://www.foxnews.com/us/2013/05/24/highway-bridge-collapses-in-washington-state-people-in-water/

Loss of life is terrible, I agree.

I read my email alert and thought to my self, he's not from around here; sure enough I hop on and you're from the UK! :woot: The politicians don't need us anymore than they need a vote to do anything. They USED to work for the people, now we work for them. You can't even TALK to a politician without going through hoops to get a "maybe" towards a meeting. You have to be a lobbyist with a LOT of money to talk directly to them (lobbyist = legal bribing of course).

In America, you once could live Tax free, you can't do that anymore. You could be born and never hold a job, never buy anything or any property and still go to jail for not filing for taxes and not paying taxes.

If you don't like a restaurant you stop paying to go there - they shut down. If you don't like a politician and you stopped paying your taxes to make sure they get the point, well, you go to jail. I own a small business, I've gone a few rounds with the lovely government in this country.

I haven't seen very many trucks driving down the river :D . The bridge has a clean break on both sides and caves inward which means more than likely a pillar gave in at the center point.

MANY bridges in this country are beyond the point of safe, they are continually used regardless.

EDIT: For louisiana...

http://www.drivinglo...cleID=9&catID=2

Amen. Between Indiana and Kentucky here, we have 2 bridges, a north and south bound one. Both of them are rusting pretty badly, and you can see where large amounts of concrete have broken off, and the rebar is visible. The state of Kentucky

owns them, but has more important things to do with the money, like paving roads that are perfectly fine to begin with. When one of the politicians families get hurt or killed because of this, maybe something will happen, but to the average person:

sorry.

Ooops. The State of Washington should definitely stay well away from building bridges. Terrible reputation going all the way back to the Tacoma Narrows disaster and the Floating Bridge that floated away.

Washington is a software state and shouldn't meddle with all this hardware stuff.

Argument from ignorance... :sleep:

Its amazing how a thread I created about bridge collapse transitioned into a guns conversation. Whether a truck hit the bridge or the bridge was neglected or had lack of inspections, I think our infrastructure in general needs more attention and alot more funding (not to say the bridge collapse was caused by that). We need to wait to see what officials say caused the collapse.

Its amazing how a thread I created about bridge collapse transitioned into a guns conversation. Whether a truck hit the bridge or the bridge was neglected or had lack of inspections, I think our infrastructure in general needs more attention and alot more funding (not to say the bridge collapse was caused by that). We need to wait to see what officials say caused the collapse.

To add to that we need to stop wasting money fixing useless ****.

The highway by my house is in ok condition but since they're doing construction there's grooves and bumps everywhere...yay for tires and alignment.

Now since this is a highway that gets insanely congested during rush hour (only two lanes), so much so that it takes like 1 1/2 hours to go 5 miles, you'd think the construction was so they could add a new lane. Nope its so they can make the hard shoulders larger...

Its going to take them 1 year to do that during which the highway will be in an absolute **** condition and tona of money all so the hard shoulders can be made even wider. Good job government...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
    • I did test it a month or so back, but ... the results I expect to be on the first page are not there.
    • Neowin is saying these are good prices? Thats crazy. As others have said they are just ######. Time for big tech to bring down the prices for real not this fake crap.
    • The iFlyTek AINote 2 is among the thinnest E-Ink tablets. It has an EMR stylus, a built-in fingerprint reader, and plenty of built-in AI features. You had me until "and plenty of built-in AI features." That and any company that still does the iProduct naming trope is an immediate pass. It suggests the company isn't very imaginative or creative and is trying to piggyback off another company's success. Extremely lame. Also kind of expensive. Better choices at lower prices out there.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      486
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!