Recommended Posts

A 3-week-old kitten survived a 1,000-mile trip across two states inside the engine of a Honda Fit and is expected to make a full recovery.

"I was concerned about this kitten because it had been in the car engine for two to three days," Julia Di Sieno, executive director and co-founder of Animal Rescue Team, Inc., told ABC News. "I put on latex gloves, and I managed to get my hands in there until I had a little kitten and wiggled it through."

Late last week, an owner of a silver Honda Fit, heard meowing coming from her car before a journey from Oregon to Santa Barbara, Calif., Di Sieno said.

"She heard the kitten crying before she departed and there was nothing she could do. She tried to find the kitten," said Di Sieno. "So they continued on their journey, driving south."

The next day, Di Sieno received a call from the car owner with concerns that a kitten was trapped somewhere inside her car. Di Sieno was as much as to 45 miles away, so she asked the car owner to call the Santa Barbara police department and request that they summon animal control.

"Animal control was dispatched, an officer showed up, and he thought perhaps the kitten was no longer in the compartment," Di Sieno said.

That afternoon, Di Sieno received a second phone call from the owner saying there were still cries from a cat inside the engine compartment.

"I had to go do something," Di Sieno said.

Di Sieno arrived at the scene and had a difficult time locating the cat. After assessing the situation, she decided to call a tow truck for some extra help.

"They needed to get underneath the car to find it," Chuck Love of Love's Towing told ABC News. "We lifted up the car, and she still couldn't find it."

With Love holding a flashlight and Di Sieno feeling around for the kitten, the duo spotted the scared feline shifting around the engine. Di Sieno was able to use a "jab stick" to administer sedation, and finally was able to get the kitten to an accessible spot.

"It took a half an hour, at least, to get it out, and after getting it out it was so cute and so small," said Love. "Lucky it was small, because then [otherwise] we wouldn't have been able to get it out. Of course, if it wasn't that small it would've never been able to get in there."

The short-haired, grey, male kitten meowed as it was pulled out of the engine in frail condition. Di Sieno took him home, started immediate care and found the 3- to 4-week-old kitten was dehydrated and had an infected eye. Now just a couple of a days later, the kitten is recovering and expected to make a full recovery.

"He is very tame now, purring, and finally eating. We've been treating him with antibiotics," said Di Sieno.

Di Sieno has been saving animals for more than 29 years at Animal Rescue Team, Inc., sustained solely by donations. She's rescued lions, bears and other large mammals, but she said this was the first time she's rescued a kitten from an engine.

"It was refreshing for me because I'm passionate about this work and saving animals," she said. "The moment I pulled him up, it was so exhilarating."

She added that, for a lost kitten, an engine is a perfect small, tight compartment to seek warmth, especially if it was in a climate such as Oregon.

Di Sieno said she couldn't have done the rescue without Love's help.

She said she appreciated "having someone step up like that without asking for money. ? He was determined to help me and get that cat out of that engine. I thought we'd name him 'Love' for now."

source

post-37120-0-74053800-1371651551.jpg

Ive had this happen a few times. The cats in my area are a huge problem since 98% of them are feral, and there are alot of them. One got up into firewall of my service truck someone, and every time I tried to get it out it hissed and clawed at me AND the humane dept. person that was helping. I finally go ###### out two days later when i was at the end of my rope, and got some bug bombs and set them off to spray into the area he was in. He ran off quickly ;p

That's probably because Honda Fit doesn't have an engine. The driver repeatedly pushes gas pedal and the directly connected crankshaft thus moves the carriage. And all sound is made by such trapped kittens equipped with a bullhorn.

  • Like 1
This topic is now closed to further replies.
  • Posts

    • Didn’t Dbrand once complain that Casetify was ripping off their designs a well? seems pretty bad of them to try and get around Valve’s copyright this way with that in mind.
    • Dbrand thought they could get away with this Steam Machine case, Valve disagreed by David Uzondu Image via Dbrand Dbrand has cancelled its highly anticipated Companion Cube enclosure for the Valve Steam Machine, which it teased back in November of last year with a concept render and sign-up page, because it did not ask Valve for permission first before manufacturing the case. According to Dbrand, it took the "backwards approach" of building the product first before asking for permission from the copyright holder. Seven months of work went into the project, requiring over a thousand engineering hours from the design team. Workers developed forty-four sets of injection molding tools, making a unique mold for each sub-component of the crate. When the Companion Cube went live on Monday last week, it, according to Dbrand, quickly became the second-fastest-selling product in the company's fifteen-year history, racking up orders for hundreds of thousands of units. Customers eagerly bought the $129.95 deluxe edition or the bare-bones $99.95 version, which the manufacturer cheekily branded as the "Poverty Cube". It was around this time that the legal eagles at Valve descended on the accessory maker with a formal demand. The developer pointed out that the iconic block design remains protected intellectual property from the game Portal, so unlicensed sales had to stop. Dbrand said that all its pleas to salvage the project with the Valve team, including proposals to run a properly licensed release under official terms "with their blessing", fell on deaf ears, so it had no choice but to obey and remove every trace of the product from the internet. If you bought the enclosure, the company said that banks will process your refund by the end of this week, but if it still hasn't arrived in your account by then, you should not hesitate to contact support. The Steam Machine itself is a high-performance console that Valve designed directly to bring PC gaming into the living room. It was announced on 12th November 2025 (the same day Dbrand announced the Cube) and runs on the Linux-based SteamOS, the same OS that powers the Steam Deck. As for the price, due to the shortage of memory and storage chips, the hardware cost landed much higher than people were expecting, starting at $1,049 for the 512 model (without a controller) or $1,128 with the new gamepad. The premium 2 TB model pushes those prices even higher, selling at $1,349 for the standalone console and hitting $1,428 if you want the bundle.
    • It's listed #399.99 on Amazon, per your link. It's not $299.99.
  • Recent Achievements

    • Rookie
      Almohandis went up a rank
      Rookie
    • Apprentice
      jahara21 went up a rank
      Apprentice
    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      97
    5. 5
      macoman
      58
  • Tell a friend

    Love Neowin? Tell a friend!