Recommended Posts

A 3-week-old kitten survived a 1,000-mile trip across two states inside the engine of a Honda Fit and is expected to make a full recovery.

"I was concerned about this kitten because it had been in the car engine for two to three days," Julia Di Sieno, executive director and co-founder of Animal Rescue Team, Inc., told ABC News. "I put on latex gloves, and I managed to get my hands in there until I had a little kitten and wiggled it through."

Late last week, an owner of a silver Honda Fit, heard meowing coming from her car before a journey from Oregon to Santa Barbara, Calif., Di Sieno said.

"She heard the kitten crying before she departed and there was nothing she could do. She tried to find the kitten," said Di Sieno. "So they continued on their journey, driving south."

The next day, Di Sieno received a call from the car owner with concerns that a kitten was trapped somewhere inside her car. Di Sieno was as much as to 45 miles away, so she asked the car owner to call the Santa Barbara police department and request that they summon animal control.

"Animal control was dispatched, an officer showed up, and he thought perhaps the kitten was no longer in the compartment," Di Sieno said.

That afternoon, Di Sieno received a second phone call from the owner saying there were still cries from a cat inside the engine compartment.

"I had to go do something," Di Sieno said.

Di Sieno arrived at the scene and had a difficult time locating the cat. After assessing the situation, she decided to call a tow truck for some extra help.

"They needed to get underneath the car to find it," Chuck Love of Love's Towing told ABC News. "We lifted up the car, and she still couldn't find it."

With Love holding a flashlight and Di Sieno feeling around for the kitten, the duo spotted the scared feline shifting around the engine. Di Sieno was able to use a "jab stick" to administer sedation, and finally was able to get the kitten to an accessible spot.

"It took a half an hour, at least, to get it out, and after getting it out it was so cute and so small," said Love. "Lucky it was small, because then [otherwise] we wouldn't have been able to get it out. Of course, if it wasn't that small it would've never been able to get in there."

The short-haired, grey, male kitten meowed as it was pulled out of the engine in frail condition. Di Sieno took him home, started immediate care and found the 3- to 4-week-old kitten was dehydrated and had an infected eye. Now just a couple of a days later, the kitten is recovering and expected to make a full recovery.

"He is very tame now, purring, and finally eating. We've been treating him with antibiotics," said Di Sieno.

Di Sieno has been saving animals for more than 29 years at Animal Rescue Team, Inc., sustained solely by donations. She's rescued lions, bears and other large mammals, but she said this was the first time she's rescued a kitten from an engine.

"It was refreshing for me because I'm passionate about this work and saving animals," she said. "The moment I pulled him up, it was so exhilarating."

She added that, for a lost kitten, an engine is a perfect small, tight compartment to seek warmth, especially if it was in a climate such as Oregon.

Di Sieno said she couldn't have done the rescue without Love's help.

She said she appreciated "having someone step up like that without asking for money. ? He was determined to help me and get that cat out of that engine. I thought we'd name him 'Love' for now."

source

post-37120-0-74053800-1371651551.jpg

Ive had this happen a few times. The cats in my area are a huge problem since 98% of them are feral, and there are alot of them. One got up into firewall of my service truck someone, and every time I tried to get it out it hissed and clawed at me AND the humane dept. person that was helping. I finally go ###### out two days later when i was at the end of my rope, and got some bug bombs and set them off to spray into the area he was in. He ran off quickly ;p

That's probably because Honda Fit doesn't have an engine. The driver repeatedly pushes gas pedal and the directly connected crankshaft thus moves the carriage. And all sound is made by such trapped kittens equipped with a bullhorn.

  • Like 1
This topic is now closed to further replies.
  • Posts

    • This looks awesome, I will request access via Steam later this afternoon!
    • Personally, I’ve found that it’s usually worth investing in the infrastructure you don’t want to replace later, especially cabling. Running Cat6A (or better, depending on your needs) during an upgrade is relatively inexpensive compared to having to re-cable a few years down the road. For switches I try to balance current specs with realistic growth. If my budget allows it Ill choose switches with higher uplink speeds which leaves room for expanding later on, but I don’t necessarily overspend on access ports if the endpoints won’t benefit from them anytime soon. One lesson I’ve learned is that planning for scalability pays off. It’s much easier to add devices, VLANs, or higher-bandwidth workloads when your network infrastructure already supports it than to replace hardware later.  What is your budget like?
    • I hate the term, "future-proof." We saw it back in the 90's / 2000's, if not before. You cannot future-proof anything, since there is no definition of how far into the future you plan on prepping for. Best idea is to tell us what you currently have and what its use is at the moment, and we can then offer ideas about some areas that might need an upgrade and other areas that can be left alone.
    • I can agree that it is being used in a small capacity. I worked for a company where their engineers still used XP, and when asked why it was because their sensor software wasn't compatible with newer operating systems and the software was discontinued so they couldn't upgrade the software. Given that the sensors were still in use by companies, they had to continue using XP to support the sensor, otherwise the price to the company would have gone into the millions or billions. Our response was simple: Ok, you can keep the XP machine. But we're removing it from the network. "But then it can't access the Internet or folder shares!" Yup, kinda the point. If someone wants to continue using an unsecure OS they can do, I have no problem with that. But it should be isolated. Simple. I had a fight with a guy in the engineering department for weeks before he finally relented. But we digress.   What do I plan on doing to commemorate the anniversary? Nothing. I have fond memories of the OS, but at the end of the day it's just an OS. If I had some time I might see if I could install it on my Raspberry Pi for a laugh. But my reflex memory with today's OS ideas would probably get me frustrated and I'd uninstall it after 5 mins.
    • Shutter Encoder 20.2 by Razvan Serea Shutter Encoder is one of the best video converter software and image, audio available today. It has been designed by video editors in order to be as accessible and efficient as possible. It is one of the few free professional tools. Based on FFmpeg, it has the largest codec library available. You can thus convert your files into many different formats. Complete settings for the most advanced Shutter Encoder has a panel containing a large number of settings, in order to define your own choices based on your files and perfect your video or audio output. Well-thought-out settings, with parameters predefined to create files quickly and easily. List of functions Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Extract, Subtitling, Video inserts Sound conversions: WAV, AIFF, FLAC, MP3, AAC, AC3, OPUS, OGG Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, GoPro CineForm, Uncompressed YUV Output codecs: H.264, H.265, VP9, AV1, OGV Broadcast codecs XDCAM HD422, AVC-Intra 100, XAVC, HAP....and much more. Shutter Encoder 20.2 changelog: Added "Intel Quick Sync" hardware acceleration for Linux Added 'Identify speakers' option for "Audio transcription" function Improved installer package Improved video player performance Improved timecode display with drop-frame videos Improved naming convention for surround audio files Fixed splash screen freeze Fixed bug with file hanging Fixed bugs with presets loading Fixed bugs with video player's buffer Fixed bug with 'Total length of file' option Fixed bugs with 'Record screen/device' option Fixed bug with "XAVC" & "XAVC Long GOP" functions Rollback to XPDF tool for PDF conversion Removed unused binary architecture for Mac Various corrections Various improvements Download: Shutter Encoder 20.2 | 166.0 MB (Open Source) Download: Shutter Encoder Portable | 185.0 MB Links: Shutter Encoder Home Page | FAQ / Tips | macOS | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      534
    2. 2
      +Edouard
      265
    3. 3
      PsYcHoKiLLa
      152
    4. 4
      Steven P.
      99
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!