battery life with Nexus 4


Recommended Posts

Hi all

 

Over the last few weeks the battery life for my Nexus 4 has been crap, when the power gets down to around 40% the phone dies and then when i plug in the charger it shows that the battery is dead and its got 0% charge in it, when it goes back upto 100% i let it de-charge and the same happens again when it hits around 40%....

 

Im only gettin around 5-6hours out of the phone until it dies at the moment, i used to be able to get 10-11hrs without problems. any apps ive installed which i thought could be doing this ive got rid of...

 

any ideas what could be causing this

 

thanks

Link to comment
https://www.neowin.net/forum/topic/1159956-battery-life-with-nexus-4/
Share on other sites

To start with Allwight R-Kid to a fellow Wolvie (no not the footy club)

First thing that came to mind was the battery might have had a few too many overcharges, there are plenty of users here that will say the memory effect doesn't apply to modern batteries, I'm not one of them.

try fully discharging it, then after a day or 2 have passes, slow or trickle charge it from a usb port from your pc (if applicable) Doesn't matter if the pc's on or not, mine will charge all my usb devices regardless of whether the pc's on or not, and see how it goes

 

Otherwise you might need to get the battery replaced if removable, if not, you might need to take it to a technician to do it for you if it's under warranty.

(There are other methods but I'm sticking to the obvious and legal ones)

Sounds like a damaged battery, if you can be bothered you can replace the battery without too much effort.

 

Something along these lines

 

http://www.ebay.com.au/itm/Genuine-Original-LG-Nexus-4-replacement-battery-New-and-unused-/231000544054?pt=AU_MobilePhoneAccessories&hash=item35c8b49336

 

and instructions

 

http://www.ifixit.com/Guide/Installing+Nexus+4+Battery/13039/1

I'll give it a try.

Bluetooth is never on WiFi is always on NFC is off GPS is on but these things have never caused problems in the past

Well, now they might be causing problem, so you should also try to disable them (turn them off) and observe your battery life.

  • Like 1

I've always ran with GPS and WiFi on and never had issues so why should it act up now..

 

It shouldn't.

 

It sounds like you have a faulty battery, if it's still under warranty I'd take/send it back.

 

If not, repair it yourself :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Honestly... 4 wasn't fun, 5 had unlikeable, annoying, or dull characters... Yeah, to me the magic died with San Andreas.
    • Flameshot 14.0 Final by Razvan Serea Flameshot is a free and open-source, cross-platform tool to take screenshots with many built-in features to save you time. Using Flameshot is as simple as launching, dragging the selection box to cover the area you want to capture, making annotations as needed in on-screen and saving the shot to your computer, all with a very simple and straightforward interface. Flameshot allows users to simply upload their screenshots directly to the cloud in order to easily share it with others. You can upload your image directly to Imgur with a single click and share the URL with others. In-app screenshot editing - You can choose to add an arrow mark, highlight text, blur a section (blur or pixelate an area), add a text, draw something, add a rectangular/circular shaped border, add an incrementing counter number, and add a solid color box with Flameshot's built-in editing tools. Command-line interface (CLI) - Flameshot has several commands you can use in the terminal without launching the GUI via a command line interface. The command line interface lets you script Flameshot and use it as the subject of key binds. Flameshot 14.0 release notes: This release brings major improvements to multi-monitor support, fractional scaling support, new capture workflows, and a long list of bug fixes across all platforms. Changelog: New Multi-Monitor Capture Workflow New monitor selection screen before capture for better multi-monitor and mixed-scaling support. Option to auto-capture the monitor under the cursor (X11 & Windows). Tray menu can directly select a monitor. Linux Improvements XDG Desktop Portal is now the primary screenshot method. Added legacy X11 fallback option for minimal window managers. New D-Bus capture API for scripting and automation. Windows Enhancements Global screenshot hotkeys now supported (not limited to Print Screen). New portable mode stores settings next to the executable. Clipboard now always uses PNG format for better compatibility. CLI & Platform Updates Redesigned flameshot screen command with per-monitor capture support. Added native Nix Flake support. More compact launcher UI and improved update notifications. Major Fixes Multiple Wayland stability fixes, including KDE Plasma crash fixes. Clipboard compatibility improvements for GNOME, Wayland, X11, Windows, and macOS. Fixed D-Bus hangs, capture crashes, and HiDPI region issues. Other Changes Dropped Ubuntu 20.04 (Focal) support. Updated translations and build infrastructure. Intel macOS builds are no longer provided. [full release notes] Download: Flameshot 14.0 | 18.1 MB (Open Source) Download: Flameshot Portable | 53.0 MB Links: Flameshot Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      183
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      73
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!