Apple invention may reveal fingerprint scanning tech headed to iPhone 5S


Recommended Posts

AGAIN: It does not say they have invented scanning tech, it says they have an invention thats going to bring scanning tech to the iPhone, which, AGAIN: Is absolutely true.

 

+10

 

It's not worth trying to reason with somebody who, for one, didn't read the actual patent, and two, doesn't have the capacity to understand what's being patented.  It's always comical seeing how some of these Apple haters don't have the slightest clue how the patent system works.

Trust me, its funnier seeing apple fans freak out when someone someone says something negative (even as a joke) about apple.

 

Even as a fan,  you should be able to admit that apple usually tries to patent stuff that shouldn't be patented.

 

There's lots and lots of people on both sides that are drama queens.  :D

 

 

You're right in a sense.  Basically they're just taking advantage of a broken system, so they aren't really doing anything wrong (legally).

 

The only one that they really shouldn't have gotten was the "rectangle" one, but if they even dreamed of using it against somebody, it would be invalidated in a heartbeat.

All their other patents are generally very detailed and are very precise as to what they want protection on.

Fingerprint reader/scanner isn't new... it has been around for many years.. I was a tester for a security company that made fingerprint reader/scanner for my PC back in 90's.

 

Some laptops have fingerprint reader ... which one of my laptops does but I never used it.

Trust me, its funnier seeing apple fans freak out when someone someone says something negative (even as a joke) about apple.

 

Even as a fan,  you should be able to admit that apple usually tries to patent stuff that shouldn't be patented.

 

To be honest i just get annoyed when people jump on the band wagon and ruin threads because it's about Apple, it's at a stage now it's not even worth talking about Apple on Neowin.

+10

 

It's not worth trying to reason with somebody who, for one, didn't read the actual patent, and two, doesn't have the capacity to understand what's being patented.  It's always comical seeing how some of these Apple haters don't have the slightest clue how the patent system works.

 

 

Apple hater I am eh?   Too bad I own both an iMac (mid 2007) and an iPhone 4S. Use them both every day. Too bad you don't have the capacity to see that not everyone who thinks this is a ridiculously overstated article, isn't necessarily an apple hater.

 

Oh, and just so you know. I understand they're patenting something that's already been invented, and put into use by other companies, just like every other thing they've patented over the last few years. No innovation comes from Apple itself, it all comes from other companies. =)

 

 

AGAIN: It does not say they have invented scanning tech, it says they have an invention thats going to bring scanning tech to the iPhone, which, AGAIN: Is absolutely true.

 

Mkay. So let me explain this again.    The title says they invented tech to put fingerprint scanning into the bezel of a device..... no. They took an existing idea and modified it to fit their needs (that's ignoring the fact that the tech was created by another entity completely).... That's not inventing. Inventing is creating something that never existed.... so. AGAIN. you're wrong.

 

 

To be honest i just get annoyed when people jump on the band wagon and ruin threads because it's about Apple, it's at a stage now it's not even worth talking about Apple on Neowin.

 You just keep calling the pot black there kettle.

How is this new technology? Apple didn't invent fingerprint scanners, nor did they come up with the idea for embedding it in the bezel of a device... HP and Dell laptops, for instance, have had biometric scanners for a long time...

 

EDIT: Also forgot about the Moto Atrix....

"New technology" refers to how it was done, not what it does. You don't patent outcomes, you patent the methods that lead to the outcome. If the outcome was the inventing, it would be copyrighted, not patented.

Oh, and just so you know. I understand they're patenting something that's already been invented, and put into use by other companies, just like every other thing they've patented over the last few years. No innovation comes from Apple itself, it all comes from other companies. =)

 

Really? Do you have prove of a single device right now that exists that achieves scanning your fingerprint EXACTLY the same way this patent refers to? They didn't patent scanning a fingerprint. They patented a specific way of doing it which is apperently unique. You seem to have the concept of copyrights and patents mixed up.

"New technology" refers to how it was done, not what it does. You don't patent outcomes, you patent the methods that lead to the outcome. If the outcome was the inventing, it would be copyrighted, not patented.

That still doesn't explain why the article says they "invented" putting fingerprint scanners into a bezel.

 

I understand that they're patenting the design of the bezel and scanner, and the way it operates. I don't understand how anyone can think of this as an "invention" or as innovative in any way shape or form, as it's been done numerous times before. All they did, was take an existing scanner (created by a company that was later bought out by Apple), and modify the bezel of the iPhone to hold it in place.... like what every single other company has done when it puts a biometric scanner in its device.

 

But logic be damned, if it comes from Apple it never existed beforehand. Like rectangles with rounded corners.

 

That still doesn't explain why the article says they "invented" putting fingerprint scanners into a bezel.

 

I understand that they're patenting the design of the bezel and scanner, and the way it operates. I don't understand how anyone can think of this as an "invention" or as innovative in any way shape or form, as it's been done numerous times before. All they did, was take an existing scanner (created by a company that was later bought out by Apple), and modify the bezel of the iPhone to hold it in place.... like what every single other company has done when it puts a biometric scanner in its device.

 

But logic be damned, if it comes from Apple it never existed beforehand. Like rectangles with rounded corners.

 

 

 

You're confusing the logistics of a few words in the article title with the actual point...

This is an invention of a very specific way to integrate a scanner into a bezel.  There's no reason to nitpick the article when the patent itself is a very simple concept.

 

You still keep acting like Apple is patenting the finger print scanner.  And that's 100% wrong and has been explained to you about 20 times now.  Let it go already...

like what every single other company has done when it puts a biometric scanner in its device.

 

And it is still an invention, regardless of how it was done, because it was never done before for that specific situation. Yes, it degrades the value of the term invention, but it doesnt change that it is in fact an invention. It has nothing to do with coming from Apple. Of course, all the Apple haters come out to claim it does.

And it is still an invention, regardless of how it was done, because it was never done before for that specific situation. Yes, it degrades the value of the term invention, but it doesnt change that it is in fact an invention. It has nothing to do with coming from Apple. Of course, all the Apple haters come out to claim it does.

 

That is seriously degrading the term, but okay. I'll give you that one. And it does have something to do with coming from Apple, as the article states first that Apple invented it, then that another company invented it. But conflicting information doesn't matter at all. ah duuuurrrr

btw. the patent is for INTEGRALLY MOLDED DIE AND BEZEL STRUCTURE FOR FINGERPRINT SENSORS AND THE LIKE   

not for how it scans your finger.

 

 

According to one variation described in the patent, the bezel may be an electrically conductive arch-shaped structure secured to a substrate. The substrate may have leadlines or the like formed thereon to allow electrically interconnection between the bezel and other circuitry. The bezel may alternatively be a solid body or part of a bezel frame. A single bezel may be integrally molded with the sensor die in an encapsulation structure. The bezel may be adjacent a single side of the sensor die, several sides of the sensor die, or may surround the sensor die.

 

The molding of the bezel and sensor die may be such that the top surface of the bezel and the top surface of the sensor die are coplanar. In this case, the top surface of the bezel may protrude slightly above the encapsulation material, for example to improve physical contact therewith by a user's finger.

Okay. So here they say that the scanner is essentially one unit with the structure around it. Right?

 

Tell me then, how is the Motorola Atrix any different? They're patenting the fact that the scanner is protected by a piece of conductive plastic, which is then protected by more plastic. And that it may be in the shape of an arch, with the sides a bit higher. Like every. single. other. scanner (with the exception of the arch)  And don't tell me "it scans in a different way!" It doesn't, It's a regular finger print scanner. If you read the patent, it is for the design of the scanner/bezel. Not the way it scans your finger.

 

God damn that's innovative. 

 

I retain that the only reason they're doing this is so they can sue anyone who tries to use a fingerprint scanner from now on.

 

and a tidbit from the patent itself

21. The fingerprint sensor of claim 20, wherein said first conductive bezel and said second conductive bezel are each electrically coupled to said die by way of said substrate.

Yay, gluing the pieces together is so innovative, no one has ever glued anything together before.

 

 

"Further still, various presently unforeseen or unanticipated alternatives, modifications variations, or improvements therein or thereon may be subsequently made by those skilled in the art which are also intended to be encompassed by the claims, below."

 

So, anyone who improves on their design, (which is gluing things together, and putting it into a device) needs to license their patent.

 

You're confusing the logistics of a few words in the article title with the actual point...

This is an invention of a very specific way to integrate a scanner into a bezel.  There's no reason to nitpick the article when the patent itself is a very simple concept.

 

There is reason to nitpick an article. Media bias is what causes fanboyism, and breeds hatred amongst people. 

 

 

I have very little against Apple, other than their inability to have a machine function properly in an enterprise envrionment, consistent patent trolling, and the majority of their user base, which consists mostly of people who think that everything they do should be worshipped like they're a god and have an IQ range of 40-60. (ex youtube.com/watch?v=BMsLArefSOw)

There is reason to nitpick an article. Media bias is what causes fanboyism, and breeds hatred amongst people. 

 

No, stupid people are the sole reason behind "fanboyism", and what's sad is that as intelligent as many people are (or pretend to be), these "tech enthusiasts" still get wrapped up about who did what first as if any of it is relevant.

 

The general consumers don't really give a damn, and most people that have bias against one company or another is because they've had poor experiences with the product, service, or company in the past.

 

This article will not be read by the "masses", no one going shopping will ever quote this article let alone reference it... This is the reality of the general consumer: they don't get wrapped up in this nonsense. They buy with their eyes, they buy what looks good to their wants or needs.

 

tl;dr: I'm not sure what you're complaining about here.

No, stupid people are the sole reason behind "fanboyism", and what's sad is that as intelligent as many people are (or pretend to be), these "tech enthusiasts" still get wrapped up about who did what first as if any of it is relevant.

 

The general consumers don't really give a damn, and most people that have bias against one company or another is because they've had poor experiences with the product, service, or company in the past.

 

This article will not be read by the "masses", no one going shopping will ever quote this article let alone reference it... This is the reality of the general consumer: they don't get wrapped up in this nonsense. They buy with their eyes, they buy what looks good to their wants or needs.

 

tl;dr: I'm not sure what you're complaining about here.

 

I'm complaining about the fact the patent system is ****.

 

And that an article goes over the top and essentially tries to flat out say that Apple invented biometric scanning in mobile devices.

Do you think the average consumer will know the Motorola Atrix has a biometric scanner, or that HP and Dell have integrated scanners? No? But I AM positive that the Apple users will say "Apple did this first they invented it so innovative and cool and no one else has ever done this before"  

I'm simply pointing out that they're patenting something stupid (gluing stuff together, and making it look shiny), and that they didn't invent **** all. But of course, I'm labelled an Apple hater for saying something bad about the Glorious Leader. (Yes, I am comparing Apple fanboys to the Korean regime)

I'm complaining about the fact the patent system is ****.

 

And that an article goes over the top and essentially tries to flat out say that Apple invented biometric scanning in mobile devices.

Do you think the average consumer will know the Motorola Atrix has a biometric scanner, or that HP and Dell have integrated scanners? No? But I AM positive that the Apple users will say "Apple did this first they invented it so innovative and cool and no one else has ever done this before"  

I'm simply pointing out that they're patenting something stupid (gluing stuff together, and making it look shiny), and that they didn't invent **** all. But of course, I'm labelled an Apple hater for saying something bad about the Glorious Leader. (Yes, I am comparing Apple fanboys to the Korean regime)

 

I think one of the big issues lies with that when Apple sues someone over a patent, people bitch and complain about how they're an awful company stifling innovation. Then when Google or Samsung does it to Apple, suddenly it's justice, the companies are applauded, and no one gives two craps about how we're still stuck with a patent system that needs refining.

 

As for the article, I'm not sure I understand what the complaint is if everyone seems to understand the principle explained here. None of us are mislead in the slightest from what I can tell. :ermm:

Given how poorly this type of thing worked on the Motorola Atrix, I don't imagine they'll implement this any time soon. Such a pain in the ass to use too. Why not just have the home button as one big thumb scanner, problem solved

 

Tell me then, how is the Motorola Atrix any different? They're patenting the fact that the scanner is protected by a piece of conductive plastic, which is then protected by more plastic.

No they are not. Stop simplifying the wording to attempt to make a point. If they were patenting protecting a scanner by a piece of conductive plastic, that is exactly what the wording would say. And notice how your snippet starts... "According to one variation described in the patent" or in other words, this is just part of the overall patent, not the entire patent. You are making the same mistake as the media when you over simplify a patent and then draw assumptions from that.

i would like it in the enterprise, one added extra layer of security. I know some consumers that would like the option to have it to.

 

Also where does it say that Apple invented finger printer technology, the article states that there is a rumor the iPhone 5S had it, Apple haven't even commented or mentioned the tech yet.

Being required to use your second hand isn't a good solution.  Like I said, the top would probably be the only reasonable location for it, but even then, you're applying downward force via the swipe, and the swipe will be at an angle (due to the aesthetics of a hand) unless you re-position your hand.  If it doesn't recognize the crooked swipe, then you'll have to try again.  Even that sensor on laptops is really picky.  Having to repeat a swipe or re-position your hand all will attribute to more drops.  No research is needed because that's common sense...

 

I have absolutely no issues making a swipe motion with my index finger over the right side of my iPhone or the top. Beyond that you're making all kinds of assumptions without even having tried the product yourself. Why don't we just wait and see what Apple comes up with first huh?

That still doesn't explain why the article says they "invented" putting fingerprint scanners into a bezel.

 

I understand that they're patenting the design of the bezel and scanner, and the way it operates. I don't understand how anyone can think of this as an "invention" or as innovative in any way shape or form, as it's been done numerous times before. All they did, was take an existing scanner (created by a company that was later bought out by Apple), and modify the bezel of the iPhone to hold it in place.... like what every single other company has done when it puts a biometric scanner in its device.

 

But logic be damned, if it comes from Apple it never existed beforehand. Like rectangles with rounded corners.

 

 

It an invention because it's been invented.

 

You are confusing inventions with innovating, just because something isn't innovating it doesn't mean it wasn't an invention. You are assuming that because it's a new invention that Apple is claiming to be bringing some completely new innovation onto the market.

 

Also not at any point does the article mention it's innovation in any way shape or form, you are just a typical Apple troll jumping on the band wagon that loves to throw these words around at anything to do with Apple.

I have absolutely no issues making a swipe motion with my index finger over the right side of my iPhone or the top. Beyond that you're making all kinds of assumptions without even having tried the product yourself. Why don't we just wait and see what Apple comes up with first huh?

 

I'm so sorry for speculating on something that the market isn't asking for...

I had a USB Flash drive with a Finger print scanner.  I've seen laptops with a finger print scanner. The tech is not new or innoative.

Good thing nobody claimed a finger print scanner was new or innovative.

 

Posts like this make me think that we should add a feature to Neowin. In order to post a comment, a user must answer a questionaire that checks if they even bothered to read the article and comprehended what was said. Since Illage clearly did not, we wouldn't even see this waste of a post.

  • Like 1

Good thing nobody claimed a finger print scanner was new or innovative.

 

Posts like this make me think that we should add a feature to Neowin. In order to post a comment, a user must answer a questionaire that checks if they even bothered to read the article and comprehended what was said. Since Illage clearly did not, we wouldn't even see this waste of a post.

 

I love the idea.  :D

The political threads wouldn't be as fun though.

Good thing nobody claimed a finger print scanner was new or innovative.

 

Posts like this make me think that we should add a feature to Neowin. In order to post a comment, a user must answer a questionaire that checks if they even bothered to read the article and comprehended what was said. Since Illage clearly did not, we wouldn't even see this waste of a post.

Wow I said that because Apple will no doubt try and claim it as an innovative feature, and how they invented biometrics technology, and try to pass it off as something magcial.  To quote Ocelot from MGS2 "There's no such thing as magic or the supernatural, only cutting edge technology"

I had a USB Flash drive with a Finger print scanner.  I've seen laptops with a finger print scanner. The tech is not new or innoative.

 

I have said about laptops in a few posts back.. plus I have worked with a security company with their security products.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!