Recommended Posts

I've been thinking about getting a Raspberry Pi to become a downloader/smart TV solution, given it's low price and low power consumption. Can anyone tell me how much power it will actually consume if plugged in and downloading via Ethernet? I don't understand all the power statistics that I've found on the Internet as they confuse me.

Can anyone tell me what the costs could be, or what the power consumption is compared to other electrical devices, such as a light bulb, router, homeplugs, etc?

Also, what's the normal power consumption for homeplugs and a normal router?

Link to comment
https://www.neowin.net/forum/topic/1160540-raspberry-pi-power-consumption/
Share on other sites

The official figures for the ORIGINAL 256MB model B one is 5 watts, it runs on 5v at about 1 amp, 5*1 = 5w.

The new 512MB one that allows a lot more power to passthru to the USB slots (model B) will probably use more depending on what's plugged in.

Original Model A from what I remember is 5v at 0.5a meaning 2.5w, not a clue about the new model A but it doesn't have ethernet anyway.

 

In theory the original RPi B uses half the power an 11w energy efficient light bulb uses, well that's the raspberry pi itself, the actual power depending upon the power supply you use, seeing as most plug-in USB power adapters are upto about 75% efficient.

 

Routers probably use a bit more power due to the multiple ethernet isolation transformers inside them, again it all depends upon the router, the manufacturer and other things.

For 'SmartTV' functionality, I think you might be better off with a with an Android MiniPC like this one.  They use the same amount of power but is far more capable than the RaspPi (I have both btw).  I found out like most do about the RaspPi is that you run out of headroom fast when it comes to performance.

 

Also, the MK 809II is only a few pounds more expensive as well.

 

I've linked mine to my Google account where I have access to stuff like Plex which can stream movies and TV series straight off my server and it can handle 1080p content fine. :)

Remember that it's absolutely fine for streaming over ethernet, but very slow as a download box. IO over USB gets very slow very fast and the ethernet doesn't go that fast either.

 

I have mine as a tiny Tomcat web server now, runs remarkably well. Plan is to put XBMC on it (OpenELEC) when I get a new TV.

  On 23/06/2013 at 11:55, Ambroos said:

Remember that it's absolutely fine for streaming over ethernet, but very slow as a download box. IO over USB gets very slow very fast and the ethernet doesn't go that fast either.

 

I have mine as a tiny Tomcat web server now, runs remarkably well. Plan is to put XBMC on it (OpenELEC) when I get a new TV.

What does it equate to as a download box though? My broadband can only download at 1MB/s. I assume it'll be good enough for that?

I use a 5V 1.5A power supply (thats a max output of 7.5W) and it powers my raspberry pi with ethernet cable, as well as  750mA 2.5" HDD its using to improve throughput.

I can download/upload to the Pi around 20MB/s this way, opposed to around 4-5MB/s off SD, plus I have a TB of storage.

 

Highly suggest anyone who wants real throughput from the Pi follow this guide: http://zeroset.wordpress.com/2012/10/03/move-an-existing-raspbian-installation-from-memory-sd-card-to-usb-flash-drive-stick

 

My XBMC box runs from a 5V 1A supply without any problems, and if you use HDMI-CEC and have no need for a wifi adapter you can likely get away with a 5V 0.5A or 0.75A supply. Ensure you are using a stable quality supply and a good microUSB power cable. 90% of raspberry pi issues come from these 2 things.

 

Most routers use 24W (12V 2A) you can determine this by unplugging the AC adapter and reading it. You should see something labeled OUTPUT: 12V --- 05.A (should be a solid bar with dashes under it) this states it can supply 12Volts at 0.5Amps.

 

Power is Voltage multiplied by Amps, so just multiply them together and thats the MAX amount of power it can use under full load. In the case above, 12*0.5, it'd be 6W of power. Most devices operate at most in the 60-80% of their supplies rating, to prevent failure with power brownouts or spikes. For maths easy we assume it uses the MAX power all the time.

 

You can do a lot of stuff on them too. like running XBMC while downloading torrents and having an SSH VPN tunnel is just the tip of the iceberg.

  On 23/06/2013 at 11:57, Daedroth said:

What does it equate to as a download box though? My broadband can only download at 1MB/s. I assume it'll be good enough for that?

It'll do fine for that. My connection is 15MB/s and it starts to struggle at that point (very high CPU, especially with torrents).

This topic is now closed to further replies.
  • Popular Now

  • Posts

    • Here's what iPhone models support iOS 26 by Hamid Ganji After months of swirling rumors, Apple kicked off its WWDC 2025 event today. The event was mostly focused on a slew of new AI-driven features for Apple devices and the company's new operating systems, which carry the Liquid Glass design. However, iOS 26 was the flagship of the event as it posed to alter the user experience of Apple's best-selling product, the iPhone. During the event, Apple announced the list of compatible iPhone models with iOS 26. Here is the list: iPhone 16e iPhone 16 iPhone 16 Plus iPhone 16 Pro iPhone 16 Pro Max iPhone 15 iPhone 15 Plus iPhone 15 Pro iPhone 15 Pro Max iPhone 14 iPhone 14 Plus iPhone 14 Pro iPhone 14 Pro Max iPhone 13 iPhone 13 mini iPhone 13 Pro iPhone 13 Pro Max iPhone 12 iPhone 12 mini iPhone 12 Pro iPhone 12 Pro Max iPhone 11 iPhone 11 Pro iPhone 11 Pro Max iPhone SE (2nd generation or later) If you own any of these iPhone models, you can expect to receive the first iOS 26 public beta next month via the Apple Beta Software Program. Also, developers can already access iOS 26 beta through the Apple Developer Program. The stable version is expected to drop in September with the iPhone 17 series. The above list of compatible iPhones with iOS 26 also signifies the end of software support for iPhone XS, iPhone XS Max, and iPhone XR. It's important to note that these models might still receive security updates from Apple to safeguard the device against potential threats. Apple calls iOS 26 "our broadest design update ever." It includes significant upgrades and changes compared to the previous version, though the final thoughts about the experience will be determined after the first beta hits users' devices next month. iOS 26 is also heavily focused on AI capabilities as Apple has expanded the footprint of its Apple Intelligence suite to almost every corner of the operating system.
    • Thank you for mentioning Windows Vista in the title of a news article.
    • Let's be real. Part of the motivation of the UI change is to increase CPU/RAM usage, which slows down older devices and makes battery life worse, therefore tempting people into upgrading to the latest devices. We've been through this enough times to know that the iOS updates never improve performance. Personally I value battery life over eye candy.
  • Recent Achievements

    • Rookie
      CHUNWEI went up a rank
      Rookie
    • Enthusiast
      the420kid went up a rank
      Enthusiast
    • Conversation Starter
      NeoToad777 earned a badge
      Conversation Starter
    • Week One Done
      VicByrd earned a badge
      Week One Done
    • Reacting Well
      NeoToad777 earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      +FloatingFatMan
      276
    3. 3
      ATLien_0
      257
    4. 4
      Edouard
      205
    5. 5
      snowy owl
      200
  • Tell a friend

    Love Neowin? Tell a friend!