My monitor doesn't wake up after sleep!

By Bukssna
in Hardware Hangout

 Share

Recommended Posts

Neowinian

Bukssna

Posted
Posted

Hi everybody,

 

I just registered because I have this problem and I don't know what else to do, so I figured maybe someone here can help me out!

 

I have this very weird specific problem. When I try to wake up my computer from sleep, the monitor doesn't respond. You can hear that the PC is on but that monitor light goes from orange (sleep) to flashing blue (and its blue without flashing when its on).

Now when this started happening a few days ago, it used to turn on after a few minutes and if it didn't I turned off the PC and turned it on. Sometimes it would work and if it didn't I had to do it again. And now it wont turn on at all.

I know the PC works because it is also connected to TV over HDMI and I am using the TV to type this out right now. I tried unplugging the cable and nothig. I am running WIndows 7 64-bit.

 

I tried to Google it but theres too many different oppinions. I really have no idea what to do?

 

Thanks in advance!

Grand Master

Fourjays Veteran

Posted
  • Veteran
Posted

This sounds similar to an issue I've had before, which seemed to be caused by Windows not waking the video card properly when resuming from sleep.

 

You need to go to the "Power Options" in the "Control Panel", where you get the list of "Power Plans". Click "Change plan settings" and then "Change advanced power settings". Go to "PCI Express", "LInk State Power Management" and set it to "Off". I'm on Windows 8 so it may be slightly different on 7.

 

It may not be what is causing your problem, but it does sound very similar to my own experience.

Proficient

lars77

Posted
Posted

What kind of cable are you using?  Very important ;)

 

If you're using a DisplayPort cable, try temporarily using a DVI (or VGA) cable from the computer to the monitor & see if that "fixes"  the problem.  Or even HDMI to your monitor if it supports it.  If the problem goes away, then you may have a non-spec DisplayPort cable (good article on this here).  I just fixed that particular issue on my own computer, monitor would never wake up, it was so annoying!!  Believe it or not, there's only like 1-2 companies that are making certified DisplayPort cables.

 

As a workaround, you can try setting your computer to not go to sleep and/or to not put your monitor to sleep.  Yes, that solution sucks, but it would work..

Neowinian

Bukssna

Posted
  • Author
Posted

Its connected over both DVI (white) and VGA (blue) cables. I don't know really know why. But the DVI is going to the graphics card and the VGA is more near the top. I tried connecting the VGA to where the DVI is but it makes no difference. And my monitor doesn't have HDMI.

Grand Master

Hum

Posted
Posted

Maybe the monitor is very tired. ;)

 

 

I would try a new cable.

 

Also, check the settings on the monitor itself -- I've had malfunctions, because some button was pushed in.

 

I turn off my monitor with the power switch, when I'm done for a while, rather than rely on Sleep.

Neowinian

Bukssna

Posted
  • Author
Posted

So I tried connecting the monitor to a laptop, this time over VGA. It registered it but no change on the screen. Does this mean the monitor is done? I need to get a new one?

 

 

Well, you don't need both cables, so you may as well fix that first.  You should only have one cable, the one connecting the graphics card to the monitor.

 

Yeah but I don't think that has to do with anything. I mean it was working fine so far.

 

 

Maybe the monitor is very tired. ;)

 

 

I would try a new cable.

 

Also, check the settings on the monitor itself -- I've had malfunctions, because some button was pushed in.

 

I turn off my monitor with the power switch, when I'm done for a while, rather than rely on Sleep.

 

I used to just shut down the monitor too but recently I started putting it to sleep, hoping maybe save some electricity. lol

But I can't really check any of the settings since the monitor is off.

Proficient

lars77

Posted
Posted

You set your laptop to direct its main video output to the external monitor, correct?  And the monitor is set up to look for the VGA input from the laptop?  e.g. you've tried this before with a working monitor & already know how to work this, hopefully.

 

If that is the case, then yes it does sound like the monitor itself is bad.  Time to go shopping!

 

Not sure how to help you w/ the desktop video output.  It sound like you're attempting to use two video outputs from your desktop (the videocard via DVI, & the built-in desktop video or other videocard via VGA) without really telling us why you have that crazy setup.  How do you know which video input the monitor is detecting at any given time, did you manually set the input on the monitor?  Is your desktop using switchable graphics software or something similar?

Neowinian

Bukssna

Posted
  • Author
Posted

You set your laptop to direct its main video output to the external monitor, correct?  And the monitor is set up to look for the VGA input from the laptop?  e.g. you've tried this before with a working monitor & already know how to work this, hopefully.

 

If that is the case, then yes it does sound like the monitor itself is bad.  Time to go shopping!

 

Not sure how to help you w/ the desktop video output.  It sound like you're attempting to use two video outputs from your desktop (the videocard via DVI, & the built-in desktop video or other videocard via VGA) without really telling us why you have that crazy setup.  How do you know which video input the monitor is detecting at any given time, did you manually set the input on the monitor?  Is your desktop using switchable graphics software or something similar?

 

Initially it gave me a choice and I chose to duplicate the desktop. Now I tried again but I can't make it be a primary display, it's grayed out. I tried through Catalyst Control Centre, it managed, but after a few seconds it changed back. No activity with the monitor in that few seconds, nor when it is duplicated, nor when it is extended. And I don't know what you mean by setting up the monitor to look for VGA input or how to set it up...

 

As for my setup... I just connected everything, without thinking. My bad. The monitor should be detecting the DVI input because when I unplug it the TV becomes the primary video output. And when I plug it back in TV screen goes back to extended desktop. That is with VGA still being plugged in.

  • 3 months later...
Neowinian

ClassClown

Posted
Posted

hi guys, i'm new here... myself AShish

 

i've little issue regarding my desktop samsung led s20..

i've elitegroup G31 motherboard with intel dual cpu E2140,1.60ghz with windows 8 pro... i've 1 GB ram and 2 ram slots. now i have one more 1 gb ram and want to put it on second slot. problem is that when i place my second ram on that slot, my cpu is working but monitor doesn't wake up. it means when i place 2 ram together, monitor doesn't wake up.

please help me to solve this problem..

thanking you..

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Linux 7.2's first release candidate gets off to a good start

      By zikalify · Posted

      Linux 7.2's first release candidate gets off to a good start by Paul Hill Credit: Larry Ewing It has been a few weeks since the release of Linux 7.1, and in that time, the Linux 7.2 merge window has been open, where developers can submit their features and patches ready for the upcoming release. That window is now shut, and the release candidate phase has begun so that new features can be tested and further fixes applied. According to the founder of Linux, Linus Torvalds, this week’s release candidate looks “reasonably normal”. Although we are super early in the release candidates, this is a good sign as it makes it more likely that an eighth release candidate will not be needed. Torvalds even mentioned that the update’s stats are only larger than they really are because there was another AMD header drop with a third of the patch just being AMD GPU register definitions, which aren’t big changes but make the code contributed look larger overall. In addition to this, he noted that just over half the patch is drivers, even when excluding the AMD register dump. The rest of the changes are spread out over architecture updates, tooling, documentation, and core kernel updates. In the next week, Torvalds says that he will be chilling out, taking the week “mostly off”. Despite this, he will be reading emails and keeping up with things, so if he is slow responding, now you know why. He said he is hoping for a calm week, but we will just have to see if the second release candidate is actually like that. We should expect seven or eight release candidates before Linux 7.2 is released, so expect it around the end of August. If you missed it a few weeks ago, be sure to check out our coverage of Linux 7.1's release.
    • Why it's almost impossible to produce a smartphone in the United States

      By Asgardi · Posted

      Ridiculous claim that the labor cost difference of $6000 annually would increase cost per phone by $200. The employees produce 3 phones per month or what?
    • Sparkle 2.20.1

      By Copernic · Posted

      Sparkle 2.20.1 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.1 changelog: You can now change the Animation Direction from Up, Left, or Off. Added configurable animation direction (Up, Left, Off) for improved accessibility Added TTL caching to the system info backend Refactored tweak application flow to await NvidiaProfileInspector Improved IPC listener cleanup to correctly remove specific listeners Fixed online status not updating after successful network requests Updated system info tests to support backend caching Removed electron-toolkit utils dependency in favor of internal is.dev helper Fixed unwanted files and folders being included in application bundles Download: Sparkle 2.20.1 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • The best controller for XBOX and PC is down to the lowest price

      By Figure 8 Dash · Posted

      Never used the G7 Pro, but I've never had a good experience with that style of d-pad and fighting games.
    • Sihoo Doro C300 Pro V2 Ergonomic Office Chair review: The Ikea of chairs

      By Figure 8 Dash · Posted

      And I just bought a seat cushion for my mesh chair. The chair feels nice but the first time I sat in it with boxers, I realized I don't like the feel of mesh on my legs. 😂

  • Recent Achievements

    • One Month Later
      JKR earned a badge
      One Month Later
    • Dedicated
      Asgardi earned a badge
      Dedicated
    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later

  • Popular Contributors

    1. 1
      +primortal
      496
    2. 2
      +Edouard
      247
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      Steven P.
      86
    5. 5
      macoman
      65
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!