Recommended Posts

Hi everybody,

 

I just registered because I have this problem and I don't know what else to do, so I figured maybe someone here can help me out!

 

I have this very weird specific problem. When I try to wake up my computer from sleep, the monitor doesn't respond. You can hear that the PC is on but that monitor light goes from orange (sleep) to flashing blue (and its blue without flashing when its on).

Now when this started happening a few days ago, it used to turn on after a few minutes and if it didn't I turned off the PC and turned it on. Sometimes it would work and if it didn't I had to do it again. And now it wont turn on at all.

I know the PC works because it is also connected to TV over HDMI and I am using the TV to type this out right now. I tried unplugging the cable and nothig. I am running WIndows 7 64-bit.

 

I tried to Google it but theres too many different oppinions. I really have no idea what to do?

 

Thanks in advance!

This sounds similar to an issue I've had before, which seemed to be caused by Windows not waking the video card properly when resuming from sleep.

 

You need to go to the "Power Options" in the "Control Panel", where you get the list of "Power Plans". Click "Change plan settings" and then "Change advanced power settings". Go to "PCI Express", "LInk State Power Management" and set it to "Off". I'm on Windows 8 so it may be slightly different on 7.

 

It may not be what is causing your problem, but it does sound very similar to my own experience.

What kind of cable are you using?  Very important ;)

 

If you're using a DisplayPort cable, try temporarily using a DVI (or VGA) cable from the computer to the monitor & see if that "fixes"  the problem.  Or even HDMI to your monitor if it supports it.  If the problem goes away, then you may have a non-spec DisplayPort cable (good article on this here).  I just fixed that particular issue on my own computer, monitor would never wake up, it was so annoying!!  Believe it or not, there's only like 1-2 companies that are making certified DisplayPort cables.

 

As a workaround, you can try setting your computer to not go to sleep and/or to not put your monitor to sleep.  Yes, that solution sucks, but it would work..

Its connected over both DVI (white) and VGA (blue) cables. I don't know really know why. But the DVI is going to the graphics card and the VGA is more near the top. I tried connecting the VGA to where the DVI is but it makes no difference. And my monitor doesn't have HDMI.

Maybe the monitor is very tired. ;)

 

 

I would try a new cable.

 

Also, check the settings on the monitor itself -- I've had malfunctions, because some button was pushed in.

 

I turn off my monitor with the power switch, when I'm done for a while, rather than rely on Sleep.

So I tried connecting the monitor to a laptop, this time over VGA. It registered it but no change on the screen. Does this mean the monitor is done? I need to get a new one?

 

 

Well, you don't need both cables, so you may as well fix that first.  You should only have one cable, the one connecting the graphics card to the monitor.

 

Yeah but I don't think that has to do with anything. I mean it was working fine so far.

 

 

Maybe the monitor is very tired. ;)

 

 

I would try a new cable.

 

Also, check the settings on the monitor itself -- I've had malfunctions, because some button was pushed in.

 

I turn off my monitor with the power switch, when I'm done for a while, rather than rely on Sleep.

 

I used to just shut down the monitor too but recently I started putting it to sleep, hoping maybe save some electricity. lol

But I can't really check any of the settings since the monitor is off.

You set your laptop to direct its main video output to the external monitor, correct?  And the monitor is set up to look for the VGA input from the laptop?  e.g. you've tried this before with a working monitor & already know how to work this, hopefully.

 

If that is the case, then yes it does sound like the monitor itself is bad.  Time to go shopping!

 

Not sure how to help you w/ the desktop video output.  It sound like you're attempting to use two video outputs from your desktop (the videocard via DVI, & the built-in desktop video or other videocard via VGA) without really telling us why you have that crazy setup.  How do you know which video input the monitor is detecting at any given time, did you manually set the input on the monitor?  Is your desktop using switchable graphics software or something similar?

You set your laptop to direct its main video output to the external monitor, correct?  And the monitor is set up to look for the VGA input from the laptop?  e.g. you've tried this before with a working monitor & already know how to work this, hopefully.

 

If that is the case, then yes it does sound like the monitor itself is bad.  Time to go shopping!

 

Not sure how to help you w/ the desktop video output.  It sound like you're attempting to use two video outputs from your desktop (the videocard via DVI, & the built-in desktop video or other videocard via VGA) without really telling us why you have that crazy setup.  How do you know which video input the monitor is detecting at any given time, did you manually set the input on the monitor?  Is your desktop using switchable graphics software or something similar?

 

Initially it gave me a choice and I chose to duplicate the desktop. Now I tried again but I can't make it be a primary display, it's grayed out. I tried through Catalyst Control Centre, it managed, but after a few seconds it changed back. No activity with the monitor in that few seconds, nor when it is duplicated, nor when it is extended. And I don't know what you mean by setting up the monitor to look for VGA input or how to set it up...

 

As for my setup... I just connected everything, without thinking. My bad. The monitor should be detecting the DVI input because when I unplug it the TV becomes the primary video output. And when I plug it back in TV screen goes back to extended desktop. That is with VGA still being plugged in.

  • 3 months later...

hi guys, i'm new here... myself AShish

 

i've little issue regarding my desktop samsung led s20..

i've elitegroup G31 motherboard with intel dual cpu E2140,1.60ghz with windows 8 pro... i've 1 GB ram and 2 ram slots. now i have one more 1 gb ram and want to put it on second slot. problem is that when i place my second ram on that slot, my cpu is working but monitor doesn't wake up. it means when i place 2 ram together, monitor doesn't wake up.

please help me to solve this problem..

thanking you..

This topic is now closed to further replies.
  • Posts

    • Bypassed Windows 11 shows surprising stability on ancient, completely unsupported hardware by Sayan Sen When Windows 11 was first released, one of the most complained-about issues with the new desktop Microsoft OS was its higher system requirements, which pushed many relatively modern and powerful processors and devices onto the officially unsupported list. Thankfully, they have not been updated again for the base OS, though systems require four times the memory and storage if they want to run AI-powered apps and features. As such, Windows 11 technically runs on 4GB of memory, and there is no imposed restriction on the generation of memory it supports. Speaking of memory, prices are extremely high nowadays for hardware, especially DDR5 and DDR4 kits due to the current silicon shortage, and there are also reports of it affecting DDR2 as well, and it might only be a matter of time before even DDR1 gets affected. Before that could happen, an enthusiast took an ancient DDR1-based system and decided to try out Windows 11 on it to see how well the modern OS would fare on such hardware. The system runs an outdated graphics card interface standard based on AGP, or Advanced Graphics Port, called AGP 3.0 or AGP8x. AGP was essentially succeeded by the modern PCI Express (PCIe) bus standard. The user behind the experiment is retro hardware enthusiast Omores, who built the system around an ASRock ConRoe865PE motherboard based on Intel's i865PE chipset from way back in 2003, around the time when AGP was still in fashion. What made this board special back in the day was its unusual support for newer Core 2 Duo and even Core 2 Quad processors while still retaining older DDR1 memory support and an AGP8X graphics slot, making it an ideal bridge or link between two vastly different generations. Powering the machine was Intel's Core 2 Quad Q6600 alongside 3GB of DDR1 RAM and an ATI Radeon HD 4650 AGP graphics card, one of the final and most capable GPUs released for the aging AGP interface. While installing Windows 11 itself was relatively easy by bypassing Microsoft's hardware checks, getting the graphics card fully functional proved to be some challenge. Microsoft had quietly dropped native AGP support after the earliest releases of Windows 10, meaning newer versions of Windows no longer include the necessary Graphics Address Remapping Table (GART) drivers required for proper AGP acceleration. Without them, AGP graphics cards typically boot up, though with limited functionality, and can often throw a Code 43 error in Device Manager. To work around the limitation, Omores extracted Intel's legacy AGP440 SYS driver from an early Windows 10 release and paired it with a modified INF file so Windows 11 would correctly recognize the chipset. Following this and combined with AMD's final 64-bit Catalyst AGP drivers from 2012, the Radeon HD 4650 was able to operate with full AGP 8X acceleration intact. The result was said to be surprisingly usable for hardware that is over two decades old. Hardware-accelerated H.264 video playback worked correctly and benefited apps like Firefox, while legacy applications and games ran without major graphical issues. The system also successfully completed the 3DMark 2001 benchmark, although performance naturally lagged behind what the same hardware achieves under Windows 7, which is significantly lighter than Windows 11. There was, however, one unavoidable limitation as Microsoft's Windows 11 version 24H2 introduces a mandatory SSE4.2 CPU instruction requirement that cannot be bypassed through installer modifications or registry tweaks. Since no AGP-era processor supports SSE4.2, Windows 11 version 23H2 effectively becomes the final release capable of running on such systems. Regardless, it is still a very cool feat and quite fascinating to see just how stable Windows 11 turned out to be on such unfamiliar hardware. Source: Omores (Patreon) via O_MORES (Reddit)
    • That will only really help other players that are also responsible for creating the problem.
    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
    • Meta is reusing old DDR4 RAM in its servers instead of buying new hardware by Ivan Jenic Image: Meta The global hardware shortage isn’t exactly news, as the entire world has been struggling with rising component prices for quite some time now. And while big companies certainly aren’t as affected as the average consumer, even they aren’t opposed to the idea of saving a few (million) bucks. Meta appears to have found a way to spend less on new hardware while also putting its outdated infrastructure to use, essentially killing two birds with one stone. The company has built a custom chip that lets it reuse memory from retired servers rather than buying new hardware. The chip is called Vistara and allows for connecting old DDR4 RAM from obsolete servers into new servers that rely on DDR5. The problem Vistara solves goes back to a basic mismatch in how long hardware lasts. Meta replaces its servers every three to five years, but the memory modules inside them are good for seven to ten. When a server gets decommissioned, perfectly usable DDR4 RAM goes with it. Meta is presenting the new method at today’s ISCA symposium, but The Register has got hold of a paper that explains how Vistara works. It's a custom ASIC that bridges DDR4 memory to newer processors via aCXL 2.0/1.1 interface over PCIe Gen5 x16. Meta pulls DDR4 sticks from old machines and installs them in dedicated units it calls MemServers, each of which pairs 768GB of DDR5 with 256GB of recovered DDR4. The operating system sees the DDR4 as an additional memory node and draws from it when the primary DDR5 is running low. Off-the-shelf CXL hardware couldn't do this, so Meta built its own. Existing interfaces bundle their own memory with the controller, which makes reusing old RAM sticks impossible. But Vistara separates the controller from the memory entirely, so Meta can plug in whatever DDR4 sticks it has on hand. Meta plans to deploy the new architecture in hyperscale infrastructure with millions of servers, which should mean that Meta’s AI datacenters will now be more efficient. The company is investing heavily in AI infrastructure, especially with its new AI model, Muse Spark, now widely available. All of this doesn't mean that Meta will exclusively rely on "recycled" RAM, but the company is still looking at considerable savings at scale.
    • Save up to 87% on ChatPlayground AI lifetime subscriptions by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where for only a limited time, you can save up to 87% on ChatPlayground AI: lifetime subscriptions. ChatPlayground AI puts the world’s top AI models in one powerful interface, letting you enter a single prompt and instantly compare outputs from multiple models to choose the perfect response for your needs. Boost productivity and creativity with access to the latest AI giants like GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, and dozens more — all in one window. Whether you’re chatting, coding, generating images, or refining prompts, ChatPlayground AI equips you with advanced tools like prompt engineering, image/PDF chat, saved conversations, and AI image creation, plus priority support to keep your workflow seamless. Access the world’s best AI models Side-by-Side Comparisons: Enter one prompt & instantly view results from multiple AI models to find the best output for your needs 40+ AI Models: Includes GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, Llama, Perplexity, and many more Multi-Function Platform: Access AI for chat, image generation & coding all within a single interface Web Browser Extension: Offers a Chrome extension to seamlessly integrate the platform into your browsing workflow Boost productivity with powerful features ChatPlayground Interface: Designed for seamless AI model comparison in one window Prompt Engineering: Refine & optimize your prompts for better, more accurate responses Chat with Images & PDFs: Upload visuals and documents to get context-aware answers Saved Chat History: Keep track of past conversations for reference & ongoing projects AI Image Generation: Create high-quality visuals powered by top AI image models Priority Customer Support: Get faster assistance whenever you need it What you'll get with the Unlimited Plan Includes unlimited messages/month Built for prompt engineers, startups, and teams who run experiments nonstop Includes priority access to new features and future models Good to know Length of access: lifetime Redemption deadline: redeem your code within 30 days of purchase Access options: Desktop Max number of device(s): Unlimited Available to both NEW & Existing users Updates included A lifetime subscription to ChatPlayground AI (Unlimited Plan) normally costs $619, but you can pick it up for just $79 for a limited time - that represents a saving of $530 (87% off). Click the link below for more details, always check terms and specifications before making a purchase. Get this ChatPlayground AI (Unlimited) for $79 (was $619) There are also two other discounted plans to choose from. Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!