Recommended Posts

The legend of the Loch Ness Monster has persevered for more than 200 years. But could tales of a prehistoric sea creature located in a deep Scottish body of water be explained by science?

That?s the source of a new theory, which speculates that the Loch Ness Monster may actually be a fault line lying underneath the Scottish lake.

Even after 200 years of technological advances since the first reported spotting in 1806, rumors of the Loch Ness Monster continue to persist. In fact, technology has played a role in spawning some Nessie theories.

For example, in 2011, local boat skipper Marcus Atkinson produced a sonar image of what he described as a large object following his boat for several minutes at a depth of 75 feet.

And in 2012, George Edwards shared a photo of an unexplained image in Loch Ness. Skeptics have said the image was likely of a log floating atop the water.

Scientific American reports that Italian geologist Luigi Piccardi believes the Great Glen fault system is actually responsible for mysterious bubbles and the shaking ground commonly associated with supposed creature sightings.

"There are various effects on the surface of the water that can be related to the activity of the fault," Piccardi told Italian newspaper La Repubblica.

And he has some compelling evidence to back up his case. For example, he notes that many of the alleged sightings have happened at times when the 62-mile fault was experiencing an active period.

"We know that this was a period [1920-1930] with increased activity of the fault. In reality, people have seen the effects of the earthquakes on the water."

So, what do you think? There have been strange reports near Loch Ness going all the way back to the 7th century. Are the numerous sightings over the years proof of the creature?s existence, mere coincidence, or even a self-fulfilling prophecy continued on by people who want to take part in the legend? Or, could it all actually simply be explained by a natural phenomenon found across the planet?

source

Link to comment
https://www.neowin.net/forum/topic/1162654-loch-ness-monster-mystery-explained/
Share on other sites

Most animals can reproduce -- if there was some plesiosaur type creature, it may have had offspring.

 

It is also clear that there would have to be some underwater tunnel leading to the open sea.

 

Doubtful that there would be enough of whatever Nessie would eat in a relatively small loch.

 

A tunnel could also explain why Nessie sightings are rare.

Any normal person knows it's a hoax, however that doesn't stop the endless tourism, which is a good thing and should continue.

The main draw is that the Loch is damn majestic and has a quality in the air that makes it feel like it could be true.

There is on Nessie, no plesiosaur, and no tunnel.  I didn't think you were this gullible, Hum... :p

 

I am not. I pointed out that the original picture was a prank.

 

I'm simply open to the possibility that there could be some unknown creature living in Loch Ness (and Lake Champlain for that matter).

 

Other previous unknown creatures have been discovered before.

 

I don't believe that everyone claiming to see something unusual is a liar.

 

Dismissing everything out-of-hand is not sensible, nor 'scientific'. ;)

 

 

Dismissing everything out-of-hand is not sensible, nor 'scientific'. ;)

 

 

Granted for your plesiosaur tunnel theroy to be correct at the shortest you would need a tunnels that's AT LEAST 10Km and big enough for a plesiosaur. they would have found this. and if it was that "short" it would end up right outside Inverness with another 15-20Km of "fjord" to go before open sea. and of course to breed you need a lot of plesiosaus. these aren't exactly easy to hide "animals". 

 

ochams razor says that the theory can scientifically be dismissed by any sensible person. and science would say you would have to prove, not disprove such a ridiculous notion ;)

Most animals can reproduce -- if there was some plesiosaur type creature, it may have had offspring.

 

 

You also need a minimum breeding population. There's no credible evidence for 1 monster, let alone a breeding population large enough to sustain the species.

This topic is now closed to further replies.
  • Posts

    • "lets you pause updates by choosing an end date, for up to 35 days" Wasn't it "indefinitely"?
    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!