Recommended Posts

Job site Glassdoor.com provided Bloomberg Businessweek with employee reviews from their site for the 30 largest fast food chains. While protest organizers say workers are walking out of McDonald?s, Burger King, Wendy?s, and KFC, these employers actually received better reviews than other restaurants, according to Glassdoor. In their comments, employees cited complaints ranging from pay, to work atmosphere and management, to the customers.

 

For context, the average rating on Glassdoor.com is 3.2. What does that mean? A 1 rating means ?dissatisfied? and a 3 rating is considered ?okay.? According to Glassdoor spokesman Scott Dobroski, anything between 2.5 and 3.0 means employees are moderately satisfied and the company is still technically in ?okay? territory, but they?re teetering on dissatisfied. If a company receives a 3.6 or 3.7, employees are sufficiently satisfied.

 

Overall, many of the 30 largest chains posted average scores. The two largest fast food chains, Subway and McDonald?s, both had a 3.1. There are even a few companies where workers seem chipper. In-N-Out Burger, for instance, got a 4.1 rating. Chick-fil-A scored 3.7 and Starbucks had a 3.6.

 

That said, here are the lowest scoring fast food restaurants.

 

Carl?s Jr.
Rating: 2.5
Employee comment: ?Long grueling hours for little pay, angry and demanding customers, unreasonable expectations, lots of shift changes, unmotivated coworkers and not very supportive management.?

Little Caesar?s
Rating: 2.7
Employee comment: ?Low pay, no hours, little Caesar pay card deducts money every swipe.?

Jack in the Box
Rating: 2.8
Employee comment: ?Very stressful and very busy during lunch. Under staff[ed] at some shifts. Graveyard can be annoying because it is only the Shift Leader and cook. Rude Customers.?

Hardee?s
Rating: 2.8
Employee comment: ?Stoned coworkers?and managers. Actually, this didn?t matter. In fact, it made some of them much easier to deal with? Everything is covered in a layer of grime and grease, and always working around a hot broiler. A lot of yelling to move faster, and to always be doing something even when there is truly nothing to be done.?

 

more

I like the hardees comment: ?Stoned coworkers?and managers. Actually, this didn?t matter. In fact, it made some of them much easier to deal with? Everything is covered in a layer of grime and grease, and always working around a hot broiler. A lot of yelling to move faster, and to always be doing something even when there is truly nothing to be done.?

 

Sounds to me like there is something to be done :P

  • Like 3

I know a guy who works at Hardees on the weekends. From what he says I would never eat their again.

Works that way for any fast food joint.

 

I used to work at Pizza Hut.  The myth of workers spitting in your food if you ###### them off...isn't a myth.

I know a guy who works at Hardees on the weekends. From what he says I would never eat their again.

Our local Hardee's is kept fairly clean --and employes get a daily free meal, as long as the restaurant passes the monthly inspection.

I have worked for fast food before... not too bad, but not something that I would really want to do again. I can understand the comments that are being made, and can relate them to my current job as well (not fast food)

http://detnews.com/opinion/article?a=2013309020006&f=1218

Will robots replace fast food workers?

On Aug. 29th, labor-backed walkouts targeted fast food outlets in over a dozen major American cities from coast to coast, including Detroit. They were demanding a more-than-100 percent increase in the minimum wage to $15 an hour.

The protestors target their rhetoric at restaurant management. But this isn't accurate. In reality, the employees on the picket lines are fighting a war with price-conscious customers. If they get their way with a $15 minimum wage, they will only hasten the service industry's move toward automation and self-service, where the customer (or even a computer) performs a task that used to be part of an employee's job description.

The labor-aligned protesters are butting up against some basic economic realities of the service industry. Fast-food restaurants, along with other labor-intensive businesses such as grocery stores, gas stations, and retail outlets, keep just a few cents in profit from each sales dollar after paying for food, labor and other expenses. In other words, a $15 wage mandate -- which would add over $15,000 a year to the cost of each full-time minimum-wage employee -- can't just be absorbed.

This leaves employers with one of two unpleasant options: Raise prices, or reduce costs. But higher prices to offset a wage hike of this magnitude aren't realistic -- imagine how you'd respond if the 99-cent menu became the $2.99 menu. Instead, restaurant operators have to provide the same service with fewer employees.

This means that customers end up serving themselves instead of being served by an employee. For example: Today, we might bag our own groceries at a supermarket checkout or pump our own gas at the station (except in New Jersey and Oregon, where it's against the law). Even self-service soda refills at fast-food restaurants were developed as a labor-saving device.

In other cases, a robot can be "hired" to do the job instead of an employee. The technology is already here. San Francisco-based Momentum Machines recently announced a new robotic burger-flipper that does the work equivalent of three full-time kitchen employees. That's 360 burgers per hour, with no strikes, benefits or wage demands.

At current labor costs, Momentum's burger-flipper pays for itself within the first year. But at $15 an hour for an employee, the investment would pay off in a matter of months.

This trend toward automation doesn't just affect the kitchen. In 2011, McDonald's announced it was installing touch-screen ordering terminals at 7,000 European locations, where the minimum wage is higher -- making the cashier position effectively obsolete. California Pizza Kitchen, Chevys Fresh Mex and other table-service chains are experimenting with computer terminals that let customers order and pay at the table, with minimal service from a server required.

These changes don't become inevitable until the cost of service gets trumped by customers' desire for low prices. But once the jobs are automated, that's one less entry-level position for a less-skilled employee to work his or her way up the career ladder -- no small concern given that teen unemployment has been above 20 percent for the past five years.

Those teens, along with other entry-level employees, will be the first to feel the unintended consequences of a $15 minimum wage. However well-meaning the striking employees in Detroit and elsewhere are, the fact is that they're only fighting the laws of economics -- and that's a fight they can't win.

to be honest id rather have a robot cook my food and serve it to me, that way i wont have to worry about spit or thing else weird getting in my burger.  Ive worked fast food places before, I think it should be a right of passage into the job market lol. Give you a little motivation to better yourself and get out of those hell holes, that being said flipping burgers is one of the easiest jobs on the planet but the  pay sucks. I'd never work at a fast food place again.

This topic is now closed to further replies.
  • Posts

    • US citizens are paying to their government, who could use that to fund healthcare and tuition and relieve the costs of these for citizens instead of making tax breaks that overwhelmingly favor the rich. I'm not saying that tariffs are the correct solution, but what else would they be used for? What else could Trump have in mind for wanting them, if he hasn't figured out that labor costs are higher in the US?
    • I’m in need of a new chair and it sounds like the backrest cannot be locked? I also sat on a Herman miller and was devastated that it couldn’t be locked also, what is going on with chairs. I want to be able to lock the backrest into any position but not even the Herman’s do that
    • Sihoo Doro C300 Pro V2 Ergonomic Office Chair review: The Ikea of chairs by Steven Parker I've reviewed a few gaming chairs over the past three years or so and generally found them to score well in our reviews. SIHOO reached out asking if I was interested in taking a look at their flagship chair, the Doro C300 Pro V2. I never got the chance to check out its predecessor, but the V2 is described as an "Adaptive Ergonomic Chair." It became available to buy in April of this year. Let's get things rolling with a closer look at the specifications and features. Specifications Doro C300 Pro V2 Model Ergonomic Materials Mesh Back and Seat; Soft PU Coated Armrests Height adjustability 45.5 - 53 cm / 17.5" - 20.9" Seat (w+d) 52 x 43 - 47 cm / 20.5" x 16.9" - 18.5" (adjustable) Backrest 52 – 60 cm / 20.5" - 23.6" (adjustable) Lumbar support Mesh built-in (adjustable) Armrest adjustability 8D Bionic Armrests Rocking angle 105°, 120°, 135° (fixed) Neck support Mesh built-in (adjustable) Net weight 27.3 kg / 59.64 lbs Weight support 150 kg / 330 lbs Colors Black, White Warranty 5 years (upon registering) Price $499.99, $539.99 Introduction At first glance, it looks like a chair that in another life wants to be a Herman Miller; It certainly looks like my Aeron Remastered, but the Doro C300 Pro V2 has quite a few more features and costs quite a bit less. SIHOO says that it is made up of a "DynaCore" system that tracks your movement and synchronizes the headrest, backrest, lumbar support, and armrests as you shift, twist, or recline. They also say that the "SyncroFlex Backrest" molds to your spine, which kind of describes how the mesh fabric works in most ergonomic chairs, but anyway. Below are the meat and potatoes measurements for the chair. Here is the same tech sheet, but in inches. Durability I would be remiss to not talk about the various durability testing this chair underwent before coming to market, as this is claimed on the product page. First of all, the chair is BIFMA-, SGS-, and TÜV-certified. As for durability, the tests undergone were: 100,000 Castor cycles tested 120,000 Armrest cycles tested 120,000 Recline cycles tested 120,000 Gas lift cycles tested 60,000 Armrest durability cycles tested 120,000 Rotation cycles tested Nothing about weights testing, though. Now that's all disclosed, now onto my own personal findings. Assembly The Doro C300 Pro V2 came in two large boxes (1) (2), and everything was packed very well, protecting the different parts of the chair. In the box, there is a folded sheet that explains the 12 steps to assemble it; they are: Remove the bottom cover on the aluminum base; Insert the five legs into the aluminum base and use ten screws to fasten them; Insert the castors into the legs; Replace the bottom cover on the bottom of the aluminum base; Place the Class 4 Hydraulics gas cylinder into the aluminum base; Screw the bottom part of the arm rests, taking care of the orientation using two screws on each side; Use three torx screws to fasten the footrest to the bottom of the seat; Fasten the backrest to the seat using four torx bolts; Fasten the armrests to the backrest using four Torx bolts (two on each side), taking care to note the orientation; Place the chair onto the Class 4 Hydraulics gas cylinder; Insert the headrest into the top of the backrest; Use two torx screws to fasten the headrest to the backrest. There's also an online guide you can refer to. Carefully unpacking the two boxes took around 15 minutes because almost everything is wrapped in plastic and protective foam; the chair assembly itself took around an hour. I say in the above assembly steps to take note of the orientation, because it's not obvious which way around the bottom portion of the armrests go, and although there is an L and R on the bottom of the armrests, it also wasn't clear from the instructions which was actually left or right, facing the chair, or in the seated down orientation? Anyway, I ended up putting the bottom portions on the wrong sides, and after securing one of the armrests, I discovered that although it was on the correct side, the armrest base could rotate a full 360°, but not when bolted to the chair, so I had to remove it, rotate it, and then bolt it back on. Truly an Ikea experience! Also, to complicate things further, although all the parts are labeled from A to X (yes, that's 24 parts) unhelpfully, these letters do not appear on the parts themselves or the package with the bolts, screws, and washers. There's also a pair of protective gloves in the box, but I think they were made for much smaller hands than I have. Even my friend, who is 5.1, had difficulty putting them on. Once assembled, I needed to sit down. Anyway, as I said, it looks quite similar to my Herman Miller. And here is the back of it. If you look at the product page and on Amazon, it seems like a lot of thought has gone into the chair itself and what it's capable of, but there is no mention at all about the castors, and this is an area where I think the chair trips up quite quickly. I found it difficult to move the chair in any direction. I asked a friend who came to visit me earlier this week to test my findings, and she said that the wheels were "no good," so it definitely isn't just me. I am 6'2 myself and a big guy, I work from home and gained a few pounds from mostly staying in and the hell away from other people. However, the Doro C300 Pro V2 is rated for up to 150kg (330lbs), which in my case is used well within its max rating. Ergonomics The number of adjustments you can make, right up to setting it in nap mode — which I haven't fully tested yet — is what you'd expect from a premium chair. Yes, you can go up and down (max 7.5 cm adjustment), rock back and forth (with tilt adjustment), and lock the chair between three stages of 105°, 120°, 135°, which is not quite as flat as the AndaSeat I tested at 160°. Some thought has also gone into the "8D" armrests, too, which are cushioned but quite firm; you'll only know it if you press hard into the PU-covered tops, which give about half a centimeter, but it's enough to ensure your skin won't get awkwardly stuck to it in warmer (or sweatier) conditions. It almost feels like plastic and is very easy to keep clean. However, the armrest positions move far too easily, and I am not sure what that "elbow" function is. Maybe it is good for a short person with short arms, anyway, I never used it and kept it flat at all times. There are eight levels of adjustment for the armrests, they are: backwards, forwards, swing left/right, height up and down, tilt, and 360° rotation, which can be handy for desk clearance. As I said, the armrest pads shift far too easily, which could give off an ergonomic vibe, but who wants the armrest sliding when you are shifting weight? The height adjustability does lock into place when lifting and adjusting. Comfort This is ultimately what it boils down to at the end of the day, right? Quite a lot of reviews praise the comfort of this chair, and I don't disagree that the mesh seating is quite comfortable. I am used to the material from my daily Herman Miller. However, the backrest cannot be locked into place, and this is actually a feature; as you shift or recline yourself on the chair, the backrest moves with your body. It took some getting used to. The lumbar gives ample support, but I would have preferred an adjustable one built into the seat base, as this causes the backrest to move up and down at will. Again, as with my previous chair review, this chair is also rated for tall people, but nowhere in the product documentation does it say how tall. Being 6'2 myself, I'm happy to say that the backrest is tall and wide enough, and thought has been given to being able to adjust the neck rest, but as others have mentioned in their reviews, people as tall as 6.2ft is about the limit for the neckrest. Conclusion What I didn't like The footrest is rated for 15kg (33 lbs), which to me seems a bit light, and after looking online, it seems like a chair footrest for adults must be at least twice that rating. In all honesty, they are just hollow metal tubes, so it is not recommended to let a kid sit on them. I also feel like it doesn't really go out far enough for my height, so that kind of puts the dampener on me being able to use it regularly. I'll just have to continue to use my subwoofer as a footrest! I do not like the armrests being able to shift around as easily as they can, and they are a little too forward-positioned in the chair to comfortably sit close to my desk, because even in the lowest height position, they don't allow me to go under the desk like is possible with my Herman Miller. I also feel like this chair could have been delivered partially constructed, especially the armrests on the seat, and why the aluminum base wasn't already pre-constructed (without the castors) is baffling, considering it would have fit in one of the two boxes that way. The instructions also need to be clearer. On the pamphlet, there's an A to X listing (which is also used in the steps), but none of the physical parts use this lettering system! What I did like I'll be honest, I haven't used it for very long, just one week, and seating comfort is subjective after all! Any spills wiped straight off it, the stitching, and the lines look great, not a fray to be seen or stitch out of place. It looks kind of cool, too. My favorite feature of these seats is the nap mode. While you're not lying completely flat, it leans far back enough to make you easily doze off after a heavy gaming or working session. Overall, this chair offers plenty of comfort features. The MSRP does vary quite a bit depending on the region, at £549.99 in the UK, and €580 in Europe, and $599 before tax in the U.S. However, shipping is free, which is a bonus for such a heavy item. Is it worth it, though? At three years' warranty, I think it's a decent deal. Another firm out of Germany sent me a free replacement hydraulic gas spring for a chair that failed after almost four years, so it was well outside its two-year warranty. My advice is to always try, as you might have the same luck I did. If I could fault it at all, it would be the constant shifting of the armrests and backrest. Where to buy Although the footrest variant normally costs $539.99, it has been discounted to $469.99 on the official website in Black or White. In fact, the non-footrest variant is only $40 cheaper. On Amazon, it currently costs more at $499.99 links below. Sihoo Doro C300 Pro V2 for $469.99 (official website) Sihoo Doro C300 Pro V2 for $499.99 at Amazon US SIHOO provided a free sample without any review or pre-approval. Good to know This Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Making US citizens pay is a prominent tool? Joke of the week…
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      +Edouard
      207
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      73
    5. 5
      macoman
      62
  • Tell a friend

    Love Neowin? Tell a friend!