How many times I can re-install Windows 8 using my Key?


Recommended Posts

  On 31/08/2013 at 18:35, Mafia_14 said:

hey guys,

 

Just wondering if there is any limit on how many times I can re-install Windows 8/ 8.1 using my legit key on SAME PC?

 

thanks

 

To my knowledge, indefinitely. But if your motherboard or HD changes (cloning anyway that I know of) you will have to reactivate. It will ask how many computers you have installed this licenses on, and you have to say 1. MS will then deactivate previous activations. That's been my/our experience anyway.

  On 31/08/2013 at 18:39, MorganX said:

To my knowledge, indefinitely. But if your motherboard or HD changes (cloning anyway that I know of) you will have to reactivate. It will ask how many computers you have installed this licenses on, and you have to say 1. MS will then deactivate previous activations. That's been my/our experience anyway.

Activation doesn't ask anything unless you're talking to a rep on the phone.

  On 31/08/2013 at 18:35, Mafia_14 said:

hey guys,

 

Just wondering if there is any limit on how many times I can re-install Windows 8/ 8.1 using my legit key on SAME PC?

 

thanks

 

Depends on the type of laptop or PC ... the key is stored in BIOS or whatever... after first installation, it gets stored in it... then you need to re-install, you won't be asked to re-enter the key again.

 

Unless you have the hardware changes, you might have to call MS for replacement key if your installation won't take your original key.

  On 31/08/2013 at 18:45, shockz said:

Activation doesn't ask anything unless you're talking to a rep on the phone.

 

Yeah, I forgot the part about you having to call in to the automated system if your mobo or HD changes and you have to reactivate. The automated system will ask you. If you say anything other than 1 (one), it will tell you that your license agreement only allows .... and disconnect.

 

If this does happen (and it will if you get new mobo or HD and clone), the quickest way to reactivate is to run slui.exe 4 and call the toll-free automated line.

  On 31/08/2013 at 18:38, Tews said:

So long as it's the same version on the same machine, as many times as you want.

This only applies to an OEM license. A retail license can be installed wherever however many times but only ever once at a time.

 

  On 31/08/2013 at 18:54, shozilla said:

Depends on the type of laptop or PC ... the key is stored in BIOS or whatever... after first installation, it gets stored in it... then you need to re-install, you won't be asked to re-enter the key again.

What? No... Your product key is not stored in BIOS... And you will be asked for it every time you install Windows unless you have a custom OEM disc provided by Dell, HP, etc.

  On 31/08/2013 at 19:26, Xenosion said:

 

 

What? No... Your product key is not stored in BIOS... And you will be asked for it every time you install Windows unless you have a custom OEM disc provided by Dell, HP, etc.

 

It is actually stored in BIOS. I don't need to enter any key if I am installing Windows 8 Core. Its installed and activated automatically. However, If I am installing Win 8.1 RTM then I have to enter it manually....

  On 31/08/2013 at 19:26, Xenosion said:

This only applies to an OEM license. A retail license can be installed wherever however many times but only ever once at a time.

 

What? No... Your product key is not stored in BIOS... And you will be asked for it every time you install Windows unless you have a custom OEM disc provided by Dell, HP, etc.

 

Not on my end... It didn't ask me to enter the key...  because the key is already in the BIOS...

 

Plus, my installation isn't OEM. 

 

Like I said "Depends on the type of PC/laptop" ...   which means not all PCs and laptops are same ... 

 

You jumped in too fast without reading the posts.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No, this is what Powertoys Run is aiming to be but is still only about a quarter of the way there. Tho with Raycast having a thriving third-party extensions store, don't think Powertoys Run will ever be able to catch up.
    • If you look at all RAID implementations that exist, you're going to find exceptions. However, all the modern consumer varieties tend to have some things in common (by default). I'll stick to describing those. When you add a disk to a RAID array, metadata is stored at the end of the disk. It records the array the disk is part of, which other disks are in the array, etc. This is called the RAID superblock. If you create a RAID 1 array, your operating system will see them all as a single disk that is very slightly smaller than a single disk (due to the superblock). Everything you write to the RAID disk gets written identically to each of its member disks by the storage controller. Technically, disks are read/written in blocks (each block is multiple sectors in size), but this is all transparent to the user. Every file you create or change or delete is created/changed/deleted on every member disk simultaneously. This is true whether you have 2 disks in the array or more than 2.  If one disk completely fails, you can still operate just fine off the remaining disk(s) (but see the caution below). If you remove one disk and attach it to another PC, it should work fine. The partition information and everything is all at the front of the disk, just as expected. The superblock will just appear as some extra junk at the very end of the disk, outside any partition. In some scenarios, where it is recognized as a RAID member disk from another PC, there might be an extra step before it will let you use it, but it's all very doable. Caution:  Blocks are read from the disks in a staggered fashion. For example, with 2 disks, all the odd blocks are read from one disk and all the even blocks are read from the other. By working together like this, read speeds can be practically doubled. But this comes with a huge drawback. If a disk doesn't fail completely, but instead develops bad sectors, you may not realize it. The bad sectors may happen to be in blocks that are never read on that disk. In some cases, people have had bad sectors develop on one disk, then had the other disk fail, and only then realized that the remaining disk has bad sectors and corrupt data. Every backup method has its pros and cons. Never trust just RAID, or just an external HDD, or just the cloud. Use multiple methods to backup important data.
    • Evidence that it affects "most" people negatively? Based on what? The fact that their are millions of users in fact show me the opposite, that "most" are quite happy.
  • Recent Achievements

    • Conversation Starter
      Kavin25 earned a badge
      Conversation Starter
    • One Month Later
      Leonard grant earned a badge
      One Month Later
    • Week One Done
      pcdoctorsnet earned a badge
      Week One Done
    • Rising Star
      Phillip0web went up a rank
      Rising Star
    • One Month Later
      Epaminombas earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      537
    2. 2
      ATLien_0
      205
    3. 3
      +FloatingFatMan
      167
    4. 4
      Michael Scrip
      151
    5. 5
      Som
      127
  • Tell a friend

    Love Neowin? Tell a friend!