• 0

for loops, counting by 3's, and using /t in the print statement to prin


Question

I am seriously stuck.  I'm supposed to write a program that counts by 3's using a for loop with the increment clause either being 1 = i + 3 or i + = 3.  So far this is what i have, but it's not even close to working.  While it does not tell me that I have errors until the execution, once it runs i get a runtime error and must abort the program.  Am I over thinking this?  And how do you get the table (\t) function to work with the column headings and contents?  This is so confusing!  I've reread my book Deitel's C How to Program and looked up as much as I can on the web to find out more information on how to use it, but the book is vague with no examples, and the explanations that I found on the internet were very convoluted .

#include "stdio.h"

void main()
{
	int i;

	for(i = i + 3; i < 18; i++)
		{
			if (i % 3 == 0)
		printf("\t 'A'","%d",  &i);
			if (i % 3 != 0)
	continue;
			printf("\n");
	}

	for(i = i + 3; i < 20; i++)
	{ if (i % 3 == 0)
	printf("\t 'A+2", "%d", i);
	if (i % 3 != 0)
		continue;
	printf("\n");
	}
}

it should print out a table that looks like this :

 

post-505691-0-18091700-1379873055.png

15 answers to this question

Recommended Posts

  • 0

Your program is far more complicated than it needs to be. You already have the answer to the problem in your description. The iterator in your for loop should be i += 3 rather than i++ to use the loop to count by threes. Not only does that obviate your use of modulus, but it also eliminates the need for more than one for loop (assuming you actually needed more than one using the method you first attempted, which looks completely wrong).

 

I also get the impression that you don't completely understand the basic escape sequences in C. For example, '\t' is the escape sequence for horizontal tab, not table like you seem to suppose. Furthermore judging by your code I'm not entirely sure how you expected '\t' to generate a table anyway. Take a look at this page for a list of common escape sequences in C and C++. You can get a more complete picture by looking at the ASCII chart if you wish.

 

Despite its relatively short length I spotted a few more serious flaws in your code which I did not address above. I recommend that you completely throw it out, and start again based on your hopefully-more-thorough understanding of the problem.

  • 0
  On 22/09/2013 at 18:10, Terabojin said:

I'm supposed to write a program that counts by 3's using a for loop with the increment clause either being 1 = i + 3 or i + = 3.  So far this is what i hav

The increment clause is the third and last clause of the for loop statement. You have mistaken it for the first clause. You initialize i to itself + 3, which means you use i before you initialize it. In C, this is undefined behavior, i.e. the value of i will be random garbage. No wonder your program is not behaving the way you wish.

 

You increment i by 1 instead of 3, but then you filter out the non-multiple of 3 values with if statements. This shows you misundertood the question. Increment i by 3 and remove the if (i % 3) statements.

 

I suggest you start by writing a program that prints the following with only a single for loop and a single printf (no if statements):

6
9
12
15
18

This will provide the correct basis for the rest of the program. Once you have that, figure out how to print the 3 other columns (hint: use an inner for loop). Once you have that, print the column labels (A - A+3).

 

Finally, how do you run your program? Simply running the compiled .exe from a command prompt will make it hard to understand your errors. It would very helpful for you to use an IDE and launch your program in the debugger (F5 in most IDEs). When an run-time error is detected, it'll show you exactly where and what the state of the program is at that point.

  • 0
#include "stdio.h"

void main()
{
	int i;

	for(i = i + 3; i < 18; i++)
		{
			if (i % 3 == 0)
		printf("\t 'A'", "%d");
			if (i % 3 != 0)
	continue;
			printf("\n");
	}
}
  On 22/09/2013 at 19:46, xorangekiller said:

Your program is far more complicated than it needs to be. You already have the answer to the problem in your description. The iterator in your for loop should be i += 3 rather than i++ to use the loop to count by threes. Not only does that obviate your use of modulus, but it also eliminates the need for more than one for loop (assuming you actually needed more than one using the method you first attempted, which looks completely wrong).

 

I also get the impression that you don't completely understand the basic escape sequences in C. For example, '\t' is the escape sequence for horizontal tab, not table like you seem to suppose. Furthermore judging by your code I'm not entirely sure how you expected '\t' to generate a table anyway. Take a look at this page for a list of common escape sequences in C and C++. You can get a more complete picture by looking at the ASCII chart if you wish.

 

Despite its relatively short length I spotted a few more serious flaws in your code which I did not address above. I recommend that you completely throw it out, and start again based on your hopefully-more-thorough understanding of the problem.

 +xorangekiller,

 

You are right, I do not really understand C, or rather programming in general....this is a learning experience for me and unfortunately it is coming at me faster than I am understanding it.  I understand that \t is a horizontal tab, I get that, but I'm not quite sure how to do this one.  I now am getting run time errors, so I'm closer to solving this puzzle than I was before, and for your insight I thank you.  Code is hard for me to understand, and honestly it has been a lot of trial and error, including completely restarting from scratch.  So far this is what I have, but I'm not understanding how to do the printf statement.

#include "stdio.h"

void main()
{
	int i;

	for(i = i + 3; i < 18; i+=3)
		{
			if (i % 3 == 0)
		printf("\t 'A'", "%d");
			if (i % 3 != 0)
	continue;
			printf("\n");
	}
}

And I tried to adjust the for statement with the i+=3, but it is still producing a run time error, which I assume is because of something later on in the code? 

  • 0

Okay,

 

Now I have no run time errors but this is my output and here is what I have.  I'm still not sure how to use the \t function....

#include "stdio.h"

void main()
{
	int i;

	for(i = 0; i < 18; i+=3)
		{
			if (i % 3 == 0)
		printf("\t 'A %d","\t 'A+2' %d", "\t 'A+3' %d", "\t 'A+4' %d", i,i,i,i);
			if (i % 3 != 0)
	continue;
			printf("\n");
	}
}

But at least now I'm getting some sort of a print out.  Do I need to use multiple printf statements to get the output in the correct format? 

post-505691-0-50087300-1379885002.png

  • 0
  On 22/09/2013 at 21:36, notchinese said:

Also, since when does 18 + 3 = 22? (your table in the first post)

LOL!  I'm not sure what my professor was thinking when he made this assignment question to be honest.  I'm not following his logic very well let alone the logic of C.  I'm sorry to keep posting but I'm trying to work though this as much as possible.  So...with that being said this is what I have:


	int i;

	for(i = 0; i < 18; i+=3)
		{
			if (i % 3 == 0)
				printf("\t 'A' \t 'A+2' \t 'A+3' \t 'A+4'", i);
			printf("\n");
			continue;
			if (i % 3 != 0)
				printf("%d");
	
			printf("\n");
	}
}

And this is what it's doing:

 

At least now I'm getting somewhat of the formatting that is required.  I'm obviously not getting this at all unfortunately.  Just pretend that you're explaining this to a child, then maybe I'll understand this because I'm completely lost. 

 

Do I need to first initialize a printf statement before the first if statement to get the headers when I'm using the \t? 

post-505691-0-99653400-1379886042.png

  • 0

You are getting closer, but still missing some important concepts. Taking into account the advice in the posts above, you should be able to surmise the following algorithm:

PRINT_HEADER

FOR_LOOP
        PRINT A
        PRINT_TAB
        
        PRINT A + 2
        PRINT_TAB
        
        PRINT A + 3
        PRINT_TAB
        
        PRINT A + 4
        PRINT_NEWLINE

The proper algorithm will get you half way there. Your current issue seems to be evenly split between misunderstood syntax and faulty logic. I recommend that you read the printf() documentation in particular.

  • 0

OkIi used

printf("\t A \t A+2 \t A+3 \t A+4");
	printf("\n");

and it gave me the headers for the columns and I put it before the for loop.  Now I'm trying to get the printouts under those headers.  And now that I noticed the math is completely wrong, 6 + 4 != 12....hmmm.  Or am I reading the problem wrong?  Is each A+# the original number in A + whatever number is associated by A?

  • 0
  On 22/09/2013 at 21:56, Terabojin said:

And now that I noticed the math is completely wrong, 6 + 4 != 12....hmmm.  Or am I reading the problem wrong?  Is each A+# the original number in A + whatever number is associated by A?

Based on your initial description I think you are supposed to be computing the result of the three latter columns (A + 2, A + 3, and A + 4) based on the contents of the multiple-of-three-number in the first column (referred to as A in your header and assigned to i in your loop). For example, if i=3 then A=3, A+2=5, A+3=6, and A+4=7.

  • 0
  On 22/09/2013 at 22:05, xorangekiller said:

Based on your initial description I think you are supposed to be computing the result of the three latter columns (A + 2, A + 3, and A + 4) based on the contents of the multiple-of-three-number in the first column (referred to as A in your header and assigned to i in your loop). For example, if i=3 then A=3, A+2=5, A+3=6, and A+4=7.

 

 

Okay let me see if I'm understanding this correctly. 

 

Basically I should be doing:

 

if (A=i)

A+2=i, A+3=i, A+4=i;

correct?

 

  • 0
  On 22/09/2013 at 22:07, Terabojin said:

Okay let me see if I'm understanding this correctly. 

 

Basically I should be doing:

 

if (A=i)

A+2=i, A+3=i, A+4=i;

correct?

 

 

What?! Where did you get that from? Isn't there a math prerequisite for your programming class?

 

If (A=i)

A+2=i+2, A+3=i+3, A+4=i+4

  • 0
  On 22/09/2013 at 22:11, xorangekiller said:

What?! Where did you get that from? Isn't there some math prerequisite for your programming class?

 

If (A=i)

A+2=i+2, A+3=i+3, A+4=i+4

Okay I missed that, sorry for the airheaded math...just been at this problem for a long time and obviously not thinking clearly.  I do apologize for the mathematical errors.  And again,thank you for all of your help.

  • 0

Testing for i to be a multiple of 3 is useless since you start i at 0 and increment by 3. You can (and should) write this program without ifs, continues, or breaks.

 

printf only ever takes one format string. The additional arguments must correspond to the format specifiers contained in the string (characters preceded by %).

  • 0

It's probably worth breaking down your problem into smaller chunks. Try these, all as smaller programs.

1: Print the header.

So the first thing that you're required to do is print the header. Now, the header only needs to be printed once, therefore we don't need to print the header inside a loop! Just print it once before you create a loop!

My Recommendation: write a program that prints ONLY the header, and only do it once.

2: Create a loop.

Next, have a go at creating the loop. So your for loop should start at a specific number, and increment in multiples of three (e.g. 6, 9, 12, 15, 18). You don't just have to use the "++" operator to increment your variable, you can do this too:

 

// Create a loop that increments by 10 every time...
int index;
for (index = 0; index <= 50; index += 10) {
    printf("%d", index);
}

// Output:
// "0"
// "10"
// "20"
// "30"
// "40"
// "50"
Do you see how the output was created? The variable "index" was passed into the printf function as a parameter, and the printf function replaced the "%d" with the value of "index".

See if you can just do this with a loop incrementing by three every time. Don't worry about any table data at the minute.

3: Print some output that accepts more than one number

Next, try to create a program that, like #1 above, only prints one line, but prints multiple numbers worked out using some variables. Remember how the loop program above used "%d" instead of a number, and then we passed the number in? The same concept applies for as many numbers as you like. So you can create a printf statement that looks like this:

 

int i = 1;
int j = 2;
int k = 4;
printf("%d %d %d", i, j, k);

// Output:
// 1 2 4
4: Put it all together

So now what do you have? You've got three little programs that do three things:

  • Prints a static line of text.
  • Prints a set of numbers in a loop.
  • Prints a line containing multiple numbers.
How you can put all this code together to solve your problem I'll leave as an exercise to you. Hopefully by the end of the third program you'll already know what you have to do.


If you're up for some constructive criticism, I've got a couple of pointers based on your initial code:

Tip #1: Indent your code correctly

I know it might seem a bit silly being strict on indenting your code, but it really helps you to read it later. Indenting code inside curly braces (i.e. { and }) allows you to see what block of code a function sits inside.

Check out how much easier it is to read your original code with better formatting:

 

#include "stdio.h"

void main()
{
    int i;

    for(i = i + 3; i < 18; i++)
    {
        if (i % 3 == 0)
            printf("\t 'A'","%d", &i);

        if (i % 3 != 0)
            continue;

        printf("\n");
    }

    for(i = i + 3; i < 20; i++)
    {
        if (i % 3 == 0)
            printf("\t 'A+2", "%d", i);

        if (i % 3 != 0)
            continue;

        printf("\n");
    }
}

Tip #2: Don't forget about 'else'

The else statement is your friend, don't forget to call him every now and then! You don't need to check if "i % 3 == 0" and then in the next line check if the opposite is true (i.e. "i % 3 != 0"), because you can just use an else...

// Do this if i is a multiple of three...
if (i % 3 == 0)
    printf("\t 'A+2", "%d", i);

// ... otherwise do this...
else
    continue;
Tip #3: Remember to initialize your variables!

In C, your numbers won't have a defined value by default, so there's no guarantee that your number will start at zero. Remember to set your variable to zero (or another appropriate value) before you start using it, otherwise, as Asik said, you'll run into undefined behaviour, and nobody wants that!

int i; // <-- BAD! i could be "0", but it could also be "12654151", because you haven't told it what to be!
int j = 0; // <-- GOOD! j will definitely be zero the first time you use it.
  • Like 2
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • qBittorrent 5.1.1 by Razvan Serea The qBittorrent project aims to provide a Free Software alternative to µtorrent. qBittorrent is an advanced and multi-platform BitTorrent client with a nice user interface as well as a Web UI for remote control and an integrated search engine. qBittorrent aims to meet the needs of most users while using as little CPU and memory as possible. qBittorrent is a truly Open Source project, and as such, anyone can and should contribute to it. qBittorrent features: Polished µTorrent-like User Interface Well-integrated and extensible Search Engine Simultaneous search in most famous BitTorrent search sites Per-category-specific search requests (e.g. Books, Music, Movies) All Bittorrent extensions DHT, Peer Exchange, Full encryption, Magnet/BitComet URIs, ... Remote control through a Web user interface Nearly identical to the regular UI, all in Ajax Advanced control over trackers, peers and torrents Torrents queueing and prioritizing Torrent content selection and prioritizing UPnP / NAT-PMP port forwarding support Available in ~25 languages (Unicode support) Torrent creation tool Advanced RSS support with download filters (inc. regex) Bandwidth scheduler IP Filtering (eMule and PeerGuardian compatible) IPv6 compliant Available on most platforms: Linux, Mac OS X, Windows, OS/2, FreeBSD qBittorrent 5.1.1 changelog: BUGFIX: Don't interpret wildcard pattern as filepath globbing (glassez) BUGFIX: Fix appearance of search history length spinbox (glassez) BUGFIX: Remove dubious seeding time max value (glassez) BUGFIX: Fix ratio handling (glassez) BUGFIX: Fix compilation with Qt 6.6.0 (glassez) WEBUI: Make General tab text selectable by default (dezza) WEBUI: Add versioning to local preferences (Chocobo1) WEBUI: Make multi-rename search & replace fields use a monospace font (Atk) WEBUI: Fix wrong replacement sequence in IPv6 string (Chocobo1) WEBUI: Fix memory leak (bolshoytoster) WEBUI: Fix path autofill in set location and new category (tehcneko) RSS: Mark matched article as "read" if it refers to a duplicate torrent (glassez) WINDOWS: Update command line help message (KanishkaHalder1771) WINDOWS: NSIS: Don't require agreement on the license page (Chocobo1) LINUX: Fix preview not opening on Wayland (Isak05) LINUX: Add fallback for random number generator (Chocobo1) Download: qBittorrent 5.1.1 | Portable | ~40.0 MB (Open Source) Download: qBittorrent 64-bit installer (qt6) | 41.7 MB Links: qBittorrent Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Linus Torvalds releases a pretty ordinary Linux 6.16-rc3 by Paul Hill Linus Torvalds, the head and founder of the Linux kernel, has announced the release of Linux 6.16-rc3. This release comes with fixes for new features that were introduced during the merge window several weeks ago, and for old features where issues have been detected or improvements need to be made. If you remember last week, Torvalds said that rc2 seemed smaller than usual, putting it down to people going on vacation. He said this week’s rc3 seems to be in the usual ballpark for this time of the cycle, so everything looks “entirely normal.” In terms of changes, this release is “dominated” by wireless networking and GPU driver updates, however, Torvalds doesn’t think that anything really huge stands out this time. While nothing stands out Torvalds urged people to carry on testing and submitting patches. This update saw improvements to the core system and architecture. There have been improvements to ARM64 KVM that improve stability and correctness of virtualizations on ARM64. There are also improvements to RISC-V KVM and Trust Domain Extensions (TDX) for Intel which expand and secure virtualization capabilities on those architectures. On the graphics front, there are fixes for the amdgpu and amdkfd drivers that fix job handling, engine resets, display corruption, and power management features. The driver used for Qualcomm’s Adreno GPUs has been updated to improve fault handling, display timing, and driver binding. The open-source Nouveau (Nvidia) driver has been updated with fixes for GSP message queue references, potential integer overflows, buffer size adjustments, and a use-after-free bug. Finally, the Intel i915 driver has been updated to address early wedge issues, memory initializations, and build errors. There are also improvements to Wi-Fi devices (ath12k and iwlwifi), sound (ALSA), power management on AMD, and file system improvements (OverlayFS, EROFS, XFS, NFS, SunRPC). Linux 6.16 is due for release at the end of July and will then be picked up by Linux distributions, which will be the first interaction most end users have with the new features in this update. The main benefit of a newer kernel is that Linux will work on newer hardware, so if you’ve had issues with Linux, be sure to try it periodically in case your hardware is now supported.
    • Technically, it should be account-bound after activating it
  • Recent Achievements

    • Week One Done
      urbanmopdubai1 earned a badge
      Week One Done
    • One Month Later
      Jim Dugan earned a badge
      One Month Later
    • First Post
      Johnny Mrkvička earned a badge
      First Post
    • Week One Done
      viraltui earned a badge
      Week One Done
    • One Month Later
      serfegyed earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      645
    2. 2
      Michael Scrip
      226
    3. 3
      ATLien_0
      219
    4. 4
      Steven P.
      150
    5. 5
      Xenon
      146
  • Tell a friend

    Love Neowin? Tell a friend!