Recommended Posts

I'm from Israel.

My IP starts with 46.x.x.x.

whatismyipaddress shows me correctly on the map.

 

BUT,

since today Google thinks I'm in Germany:

* Youtube shows suggestions from Germany

* Play Store is fully open (include buying devices like Nexus 5). Devices, magazines, music etc. are NOT available in Israel.

* Pretty much every google service thinks I'm from Germany.

 

I haven't installed any proxies, any software...

 

Are there any other people with the same problem as mine right now?

 

Is there a way I could "debug" this?

 

Thanks!

Thanks paul0544, but it is something more fundamental than this.

I'm not just being redirected to another Google domain, I'm actually getting content that is blocked in my country.

On the other hand, I'm not getting content which is NOT blocked in my country.

Google worked fine for me, but YouTube always thinks I'm in the UK when I'm really in the US. Not a big issue since there's only a few word changes, but it's a bit annoying that it displays a banner at the top saying that the language has been set to UK.

Tried that. Rebooted both my router and modem. Disconnected both of them from power supply. Disconnected any cable that was connected to the modem.

I forgot to mention that I am connected over MPLS.

My ISP says my IP will be changed in about 3 months, and they can do nothing about that.

 

(Actually things in here are complicated because we have one company that provides the "infrastructure" and another company which is the ISP. They refuse to speak with each other, no matter what is the problem. It is easier this way to tell the user "its the other company's problem".)

I ran namebench, ALL my results appear like this:

  • www.google.com is hijacked: 173.194.112.52, 173.194.112.50, 173.194.112.49, 173.194.112.51, 173.194.112.48
  • google.com appears incorrect: 212.199.219.247, 212.199.219.221, 212.199.219.227, 212.199.219.237, 212.199.219.226, 212.199.219.217, 212.199.219.216, 212.199.219.222, 212.199.219.251, 212.199.219.236, 212.199.219.232, 212.199.219.246, 212.199.219.241, 212.199.219.231, 212.199.219.242, 212.199.219.212
  • twitter.com appears incorrect: 199.16.156.38, 199.16.156.6, 199.16.156.198

Anyway, I changed the DNS in my router, but it didn't solve the problem.

212.199.219.* is my ISP BTW.

You would definately need to reboot or at least flush your caches before checking this. Rebooting is the easiest way. Also check that your clients are all signing from the same hymn sheet with regards to DNS servers. Try setting them on Windows clients and see if that helps.

I'm behind a router (TP-LINK 741 with dd-wrt).

This just started 2 days ago, without me installing anything on any machine nor changing any configuration in the router.

I've done factory reset to the router as well and the problem remains.

 

All the clients show DNS entries of 192.168.1.101 which is my router.

 

I have now surfed to another site which is not Google and found that it has redirected me to the Dutch version. So I'm beginning to think the problem is deeper than I thought...

No. At home. Private user. No proxies are defined or have ever been.

I factory reseted the router just to be sure. It gets the DNS of my ISP. As I mentioned, changing the DNS didn't help.

 

Edit:

this is tracert to google.com:

C:\Users\x>tracert -d google.com

Tracing route to google.com [212.199.219.212]
over a maximum of 30 hops:

  1     1 ms     2 ms    <1 ms  192.168.1.101
  2     9 ms     9 ms    29 ms  10.159.160.1
  3     *       11 ms     *     212.199.24.218
  4    12 ms    10 ms     9 ms  212.199.24.217
  5    14 ms     9 ms    27 ms  212.199.219.212

Trace complete.

212.199.* are all of my ISP.

@Torolol I tried that. Didn't work.

I tried opening private browsing so no cookies and stuff. Didn't work.

 

Again- I'm getting content that is only available in Germany in my case- like the Google play store with the ability to buy music, books, devices- which are not available in Israel.

So even if YOU (or anyone else) will change its location settings on Google, you will NOT gain access to content which is normally not available in your country. This could be achieved by using proxies, which spoofs your IP so Google thinks you are from a different country. This is NOT the case here as I'm not using proxy.

  • 2 weeks later...

Hello,

When you disconnected your modem and router, did you wait 5 minutes? ISP's hand out IPs but there is a short lease to them (very short, since there are few IPv4 left) so you have to disconnect them for a while (I usually do 5 minutes and it works). It doesnt seem you have a static IP so it should give you a new one. Then you can hope that new one is from your country.

Also of course I imagine you did your standard flushing of cache, DNS, etc...

riahc3- things goes differently with my ISP. They lease the IPs for 3 months. So disconnecting will not work here.

They give each modem 3 IP addresses, so you can plug in 3 different sources to the modem (each source has it's own MAC address of course), and the modem has a "table" of MAC address and its corresponding IP.

They can send a "clear" command to the modem to clear it's MAC-IP binding (the MAC comes from the router) but they won't do that.

 

This was finally "solved" by "spoofing" the MAC address to the one from my PC (instead of the one of the router. This can be done in my DD-WRT firmware using "mac clone"). So now the modem "sees" my PC and assigns another IP address as this is a different MAC.

 

I can quickly reproduce this by setting back the MAC to my router's.

Hello,

riahc3- things goes differently with my ISP. They lease the IPs for 3 months. So disconnecting will not work here.

They give each modem 3 IP addresses, so you can plug in 3 different sources to the modem (each source has it's own MAC address of course), and the modem has a "table" of MAC address and its corresponding IP.

They can send a "clear" command to the modem to clear it's MAC-IP binding (the MAC comes from the router) but they won't do that.

 

This was finally "solved" by "spoofing" the MAC address to the one from my PC (instead of the one of the router. This can be done in my DD-WRT firmware using "mac clone"). So now the modem "sees" my PC and assigns another IP address as this is a different MAC.

 

I can quickly reproduce this by setting back the MAC to my router's.

So you have 3 IPs without NAT enabled on your router?

It has nothing to do with NAT on the router. The modem can give up to 3 IPs to the devices connected directly to it (i.e. a router, an IP phone, etc).

 

I might be wrong tho, I don't exactly know all the technical details, but I only know it helped solving my problem.

This topic is now closed to further replies.
  • Posts

    • Microsoft now allows you to tweak Visual Studio to new extremes by Usama Jawad Visual Studio 2026 recently netted a powerful feature that finally allows developers to review Git Pull Requests (PRs) directly in the integrated development environment (IDE), without needing to switch to the browser. However, that's not all that Microsoft introduced in the latest version, as it also offered a useful way to customize the IDE to their heart's content. Although Visual Studio 2026 already provides lots of stock themes based on Fluent Design principles, Microsoft understands that people still want to customize them further according to their preferences. The IDE now offers a new configuration page for themes under Tools > Options > Environment > Visual Experience > Theme colors. This allows you to set hex color codes for accent colors, hover states, and more, and apply them without requiring a restart. The Redmond tech giant further says that: Microsoft is also offering granular color tokens that allow you to customize various UX elements like the tab header without impacting the rest of the shell chrome. Your themes are also stored in JSON format in %LOCALAPPDATA%\Microsoft\VisualStudio\18.0_xxxxxxxx\ColorThemes, which basically enables you to share it with others or override existing themes. This is a major improvement in terms of the user experience powering these customization capabilities. This is because extensions were required to replace the theme, and it was not very easy to make minor adjustments. This theme configuration UX solves this problem and is available in Visual Studio 2026 version 18.7, available here.
    • AnyDesk 9.7.6 by Razvan Serea AnyDesk is a fast remote desktop system and enables users to access their data, images, videos and applications from anywhere and at any time, and also to share it with others. AnyDesk is the first remote desktop software that doesn't require you to think about what you can do. CAD, video editing or simply working comfortably with an office suite for hours are just a few examples. AnyDesk is designed for modern multi-core CPUs. Most of AnyDesk's image processing is done con­currently. This way, AnyDesk can utilize up to 90% of modern CPUs. AnyDesk works across multiple platforms and operating systems: Windows, Linux, Free BSD, Mac OS, iOS and Android. Just 7 megabytes - downloaded in a glimpse, sent via email, or fired up from your USB drive, AnyDesk will turn any desktop into your desktop in se­conds. No administrative privileges or installation needed. AnyDesk 9.7.6 changelog: Fixed Bugs Added validation feedback for passwords shorter than five characters Fixed an issue in AnyDesk One Meeting where the account name was used instead of the entered username after logging out Fixed crashes related to message editing and context menu interactions Fixed issues affecting message scrolling, text formatting, typing indicators, quoted messages, and community privacy settings Prevented users from editing automated system messages Corrected download status reporting, temporary file naming, and menu overlap issues affecting the Download History and Reactions pop-ups Other Changes Added chat list grouping settings Added keyboard navigation support (Page Up, Page Down, Home, and End) for the message feed Removed Chat language options Updated translations Download: AnyDesk 9.7.6 | 8.0 MB (Free for private use, paid upgrade available) Links: AnyDesk Home Page | Other platforms | Release History | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      501
    2. 2
      +Edouard
      202
    3. 3
      PsYcHoKiLLa
      127
    4. 4
      Steven P.
      82
    5. 5
      ATLien_0
      76
  • Tell a friend

    Love Neowin? Tell a friend!