Recommended Posts

I'm from Israel.

My IP starts with 46.x.x.x.

whatismyipaddress shows me correctly on the map.

 

BUT,

since today Google thinks I'm in Germany:

* Youtube shows suggestions from Germany

* Play Store is fully open (include buying devices like Nexus 5). Devices, magazines, music etc. are NOT available in Israel.

* Pretty much every google service thinks I'm from Germany.

 

I haven't installed any proxies, any software...

 

Are there any other people with the same problem as mine right now?

 

Is there a way I could "debug" this?

 

Thanks!

Thanks paul0544, but it is something more fundamental than this.

I'm not just being redirected to another Google domain, I'm actually getting content that is blocked in my country.

On the other hand, I'm not getting content which is NOT blocked in my country.

Google worked fine for me, but YouTube always thinks I'm in the UK when I'm really in the US. Not a big issue since there's only a few word changes, but it's a bit annoying that it displays a banner at the top saying that the language has been set to UK.

Tried that. Rebooted both my router and modem. Disconnected both of them from power supply. Disconnected any cable that was connected to the modem.

I forgot to mention that I am connected over MPLS.

My ISP says my IP will be changed in about 3 months, and they can do nothing about that.

 

(Actually things in here are complicated because we have one company that provides the "infrastructure" and another company which is the ISP. They refuse to speak with each other, no matter what is the problem. It is easier this way to tell the user "its the other company's problem".)

I ran namebench, ALL my results appear like this:

  • www.google.com is hijacked: 173.194.112.52, 173.194.112.50, 173.194.112.49, 173.194.112.51, 173.194.112.48
  • google.com appears incorrect: 212.199.219.247, 212.199.219.221, 212.199.219.227, 212.199.219.237, 212.199.219.226, 212.199.219.217, 212.199.219.216, 212.199.219.222, 212.199.219.251, 212.199.219.236, 212.199.219.232, 212.199.219.246, 212.199.219.241, 212.199.219.231, 212.199.219.242, 212.199.219.212
  • twitter.com appears incorrect: 199.16.156.38, 199.16.156.6, 199.16.156.198

Anyway, I changed the DNS in my router, but it didn't solve the problem.

212.199.219.* is my ISP BTW.

You would definately need to reboot or at least flush your caches before checking this. Rebooting is the easiest way. Also check that your clients are all signing from the same hymn sheet with regards to DNS servers. Try setting them on Windows clients and see if that helps.

I'm behind a router (TP-LINK 741 with dd-wrt).

This just started 2 days ago, without me installing anything on any machine nor changing any configuration in the router.

I've done factory reset to the router as well and the problem remains.

 

All the clients show DNS entries of 192.168.1.101 which is my router.

 

I have now surfed to another site which is not Google and found that it has redirected me to the Dutch version. So I'm beginning to think the problem is deeper than I thought...

No. At home. Private user. No proxies are defined or have ever been.

I factory reseted the router just to be sure. It gets the DNS of my ISP. As I mentioned, changing the DNS didn't help.

 

Edit:

this is tracert to google.com:

C:\Users\x>tracert -d google.com

Tracing route to google.com [212.199.219.212]
over a maximum of 30 hops:

  1     1 ms     2 ms    <1 ms  192.168.1.101
  2     9 ms     9 ms    29 ms  10.159.160.1
  3     *       11 ms     *     212.199.24.218
  4    12 ms    10 ms     9 ms  212.199.24.217
  5    14 ms     9 ms    27 ms  212.199.219.212

Trace complete.

212.199.* are all of my ISP.

@Torolol I tried that. Didn't work.

I tried opening private browsing so no cookies and stuff. Didn't work.

 

Again- I'm getting content that is only available in Germany in my case- like the Google play store with the ability to buy music, books, devices- which are not available in Israel.

So even if YOU (or anyone else) will change its location settings on Google, you will NOT gain access to content which is normally not available in your country. This could be achieved by using proxies, which spoofs your IP so Google thinks you are from a different country. This is NOT the case here as I'm not using proxy.

  • 2 weeks later...

Hello,

When you disconnected your modem and router, did you wait 5 minutes? ISP's hand out IPs but there is a short lease to them (very short, since there are few IPv4 left) so you have to disconnect them for a while (I usually do 5 minutes and it works). It doesnt seem you have a static IP so it should give you a new one. Then you can hope that new one is from your country.

Also of course I imagine you did your standard flushing of cache, DNS, etc...

riahc3- things goes differently with my ISP. They lease the IPs for 3 months. So disconnecting will not work here.

They give each modem 3 IP addresses, so you can plug in 3 different sources to the modem (each source has it's own MAC address of course), and the modem has a "table" of MAC address and its corresponding IP.

They can send a "clear" command to the modem to clear it's MAC-IP binding (the MAC comes from the router) but they won't do that.

 

This was finally "solved" by "spoofing" the MAC address to the one from my PC (instead of the one of the router. This can be done in my DD-WRT firmware using "mac clone"). So now the modem "sees" my PC and assigns another IP address as this is a different MAC.

 

I can quickly reproduce this by setting back the MAC to my router's.

Hello,

riahc3- things goes differently with my ISP. They lease the IPs for 3 months. So disconnecting will not work here.

They give each modem 3 IP addresses, so you can plug in 3 different sources to the modem (each source has it's own MAC address of course), and the modem has a "table" of MAC address and its corresponding IP.

They can send a "clear" command to the modem to clear it's MAC-IP binding (the MAC comes from the router) but they won't do that.

 

This was finally "solved" by "spoofing" the MAC address to the one from my PC (instead of the one of the router. This can be done in my DD-WRT firmware using "mac clone"). So now the modem "sees" my PC and assigns another IP address as this is a different MAC.

 

I can quickly reproduce this by setting back the MAC to my router's.

So you have 3 IPs without NAT enabled on your router?

It has nothing to do with NAT on the router. The modem can give up to 3 IPs to the devices connected directly to it (i.e. a router, an IP phone, etc).

 

I might be wrong tho, I don't exactly know all the technical details, but I only know it helped solving my problem.

This topic is now closed to further replies.
  • Posts

    • Hello, It would appear so, according to https://finance.yahoo.com/news/how-to-hide-your-home-on-google-maps-apple-maps-204146687.html. Regards, Aryeh Goretsky      
    • Hello, The Nvidia Founders Edition 3080 video card is approximately six years old, correct? Have you looked into whether replacement fans are available for it? Perhaps replacing those will improve cooling, especially when combined with cleaning the card's heatsink and replacing the thermal interface materials. Regards, Aryeh Goretsky  
    • Hello, While ~104 GB of space may seem generous (at least compared to other e-readers which have 8-32GB), I feel at this price point the device should have a Micro SDXC card slot for expansion, particularly if it allows audio books to be installed and played. I hope to see more reviews of 6" phone-sized e-readers on Neowin in the future. It will be interesting to see how they compare. Regards, Aryeh Goretsky
    • Sandboxie Plus 1.17.8 / Classic 5.72.8 by Razvan Serea Run programs in a sandbox to prevent malware from making permanent changes to your PC. Sandboxie allows you to run your browser, or any other program, so that all changes that result from the usage are kept in a sandbox environment, which can then be deleted later. Sandboxie is a sandbox-based isolation software for 32- and 64-bit Windows NT-based operating systems. It is being developed by David Xanatos since it became open source, before that it was developed by Sophos (which acquired it from Invincea, which acquired it earlier from the original author Ronen Tzur). It creates a sandbox-like isolated operating environment in which applications can be run or installed without permanently modifying the local or mapped drive. An isolated virtual environment allows controlled testing of untrusted programs and web surfing. Sandboxie is available in two flavors Plus and Classic. Both have the same core components, this means they have the same level of security and compatibility. What's different is the user interface the Plus build has a modern Qt based UI which supports all new features that have been added since the project went open source. The Classic build has the old no longer developed MFC based UI, hence it lacks support for modern features, these features can however still be used when manually configured in the Sandboxie.ini. Sandboxie Plus 1.17.8 / Classic 5.72.8 release notes: Added added DisableCustomTitleOpt=[process,][y|n] to allow [#] sandboxie title markers on custom-titlebar windows (Delphi VCL, Qt, Electron) that were previously skipped to prevent DWM repaint CPU loops #5387 Changed updated bundled ImDisk driver to 3.0.2 #5419 Fixed fix Suppress logs for expected non-user SIDs #5422 SbieSvc.exe: SBIE2218/2219 error when run program as administrator #5417 fixed explorer.exe crashes in Application Compartment when Huorong Security is installed #5423 Download: Sandboxie Plus (64-bit) | 23.5 MB (Open Source) Download: Sandboxie Classic (64-bit) | 3.0 MB Links: Sandboxie Website | GitHub | ARM64 | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!