Site (domain) outage update


Recommended Posts

We've hopefully fixed the issue with images not loading correctly on neow.in, you may need to clear your caches to see it, but it should now be resolved.

 

 

seems to be all good :)

I found this from 2003 when i searched for Neowin Down - Neowin shut down

 

I remember that well, very glad to that 10+ years after that Neowin is still around and better than ever :)

I remember that.

 

 

We've hopefully fixed the issue with images not loading correctly on neow.in, you may need to clear your caches to see it, but it should now be resolved.

Yeah fixed here.

We've hopefully fixed the issue with images not loading correctly on neow.in, you may need to clear your caches to see it, but it should now be resolved.

 

I don't use twitter and never knew about this domain until now, but I think I like it better and will stick with it even after the fix as long as no other issues pop-up.

Guys, another soution to get onto Neowin is to visit the old Neogamr domain: http://www.neogamr.net/forum/ (Most images even display correctly on that domain) :D

 

You're a genius, this is what got me the ability to log in. For some reason editing the hosts file didn't do it, and I cbf messing around with my other DNS settings

Time for us to bombard ICANN with complaint letters.

 

For why - because neowin didn't follow the rules and use a valid email address that is monitored?  Yeah lets all jump on board ;)

 

If we should send complaints to anywhere it should be the registrar neowin is registered with "DOMAIN.COM, LLC"..  They should clearly have other contact info and such that they could of contacted their customer that whois info was not in compliance, etc.

Here is the thing, the info on domain needs to be current and monitored - even if hiding behind a 3rd party, they need to forward that on to correct contact info for the domain.

It sucks that neowin went down, but you can not blame ICANN on this.

They should clearly have other contact info and such that they could of contacted their customer that whois info was not in compliance, etc.

Indeed, the administrative and technical contacts were both up to date with email, phone and physical address, you'd think they would try those if the registrant email bounced.

But here is the thing - I find it highly unlikely that ICANN replaced the ns info, that was your registrar, or the reseller not ICANN.

 

Now its possible someone reported you, or ICANN told the registrar to get it it updated.

 

you can report bad whois here

http://www.icann.org/en/resources/compliance/complaints/whois/inaccuracy-form

 

But as you can see from this statement on the site

The complaint is then forwarded to the sponsoring registrar, who must take reasonable steps to investigate and correct inaccurate data.

 

So if anyone has any issues with anyone it should be with your registrar and or reseller, shoot that domain that is pointed to for your NSes isn't even valid ;)

 

If me - I would change registrars ASAP..  I like namecheap, they have like a $4 xfer going currently I think..  Can't beat that with a stick!!

ICANN is not going to step in for something as trivial as whois info..  Its your registrar/reseller that dicked you over..  Its like the cable company shutting off your internet because they want to ask you a question because they are sure you will call ;)

 

I would drop who your currently using like a hot brick/patoato, faster than you can say Jack Robinson!!

^ can you point out the specifics where on what grounds registrar can take down your domain like that.. Seems you found them? I really have not been able to find where that is spelled out like what happened.

 

To me it was just the registrar/reseller being lazy about contacting someone that had not updated, etc.

^ can you point out the specifics where on what grounds registrar can take down your domain like that.. Seems you found them? I really have not been able to find where that is spelled out like what happened.

 

To me it was just the registrar/reseller being lazy about contacting someone that had not updated, etc.

We have the domain back.. this is what people are referring to http://community.discountasp.net/threads/new-icann-rule-could-lead-to-the-suspension-of-your-domain-name.21196/

 

Almost all of our domains were outdated, and I've updated them all.

 

Google DNS already resolves neowin.net for me.

  • Like 2

^ can you point out the specifics where on what grounds registrar can take down your domain like that.. Seems you found them? I really have not been able to find where that is spelled out like what happened.

 

To me it was just the registrar/reseller being lazy about contacting someone that had not updated, etc.

 

It is up to the Registrar, but ICANN put down some rules regarding domain contact verification.  The emails on file must work.

 

A compliant can filed by:

  • From ICANN's website to the Registrar
  • To REGISTRAR who owns the domain

The new complaint form, you can specify what is inaccurate or not accurate, it is then up to the Registrar to contact that person or company.  I believe the only method they are required to do so is by email.  One of my friends had an email address that no longer worked similar to Neowin.net's issue and when he logged into the Registrar it says "10 days" has passed since we first contacted you regarding the incident.  As soon as we updated the email address he received a verification email within about 10minutes and when he clicked it the link within the email for confirm, the Registrar automatically removed the notice on the account and the WHOIS field updated to: Active/Accurate.  

 

To me if that email address is getting bounce backs or if you change the contact information you will be notified and asked to update.  No one called the phone listed on the Whois which was correct and up to date, so the email is the most vital part.

 

GoDaddy seems to between 15-30days until they will suspend the domain if no verification takes place.  I have seen other users say it may take 30-60days if not verification is met.

 

Another source,

https://iwantmyname.com/blog/2014/01/icanns-new-rules-for-domain-registrants-require-you-to-verify-your-contact-details.html

It came from ICANN. I've been told that although the domain has been restored, the registrar is still required to contact ICANN with an update on this particular incident. Knowing that it was the primary contact email address that was the issue, and now isn't, we shouldn't expect further action from ICANN because we acted on their issue.

 

In summary, ICANN contacted our registrar with the WHOIS violation and demanded it be suspended, and also offered a solution to the problem. I don't know if we were reported because that information wasn't forthcoming. 

"In summary, ICANN contacted our registrar with the WHOIS violation and demanded it be suspended"

 

This is what I question -- who told you this your registrar/reseller?  I know the rules on what needs to be working, etc.  But have never seen ICANN make a demand.. Which is the info I was looking for in a change to the rules..  Does someone have a link to where ICANN in words says they will demand suspension or take down on such a violation.  This is what I can not find.

 

Dear Registrar, Domain.com, LLC - 886: 

 
ICANN received the Whois inaccuracy report below. It claims that the contact information associated with the domain name is inaccurate: 
 
neowin.net 
 
As required under Section 3.7.8 of the Registrar Accreditation Agreement (RAA), please take reasonable steps to investigate this Whois inaccuracy claim; and, where appropriate, correct the contact information, suspend or delete the domain registration. 
 
To determine whether your registrar is in compliance with Section 3.7.8 of the RAA, please indicate in the email reply which option below describes the actions taken by your registrar on or before 18 February 2014: 
 
1. Your registrar confirmed that the reported inaccuracy was corrected. 
 
2. Your registrar obtained satisfactory verification from the registrant that the data was correct. 
 
3. Your registrar suspended, deleted, cancelled or otherwise deactivated the domain name. 
 
4. Your registrar did not investigate the inaccuracy as Section 3.7.8 requires. 
 
If 1 or 2 above applies, please provide copies of your registrar's correspondence with the registrant while investigating this Whois inaccuracy claim (including dates and times and means of inquiries, telephone number, e-mail addresses, and postal addresses used) in accordance with Section 3.4 of the RAA. 
 
Please send the records requested above via reply email (no more than 4 MB total) by 18 February 2014 and do not change the email subject heading. Please provide records in .TXT, .PDF, or .DOC(X) format. 
 
Thank you in advance for your cooperation. 
 
Sincerely, 
 
Yungsheng Wang 
ICANN Contractual Compliance 
 
############################################ 
 
The problem summary: 
 
Domain being reported: neowin.net 
 
Time of submission/processing: Mon Jan 27 01:01:30 2014 
 
Problem in whois block: Technical Contact 
--- Error in email: Incorrect email 
--- Comment: E-mail address doesn't work. This bounces back: 
 
Your message to <[email protected]> was automatically rejected: 
Quota exceeded (mailbox for user is full) 
 
Problem in whois block: Administrative Contact 
--- Error in email: Incorrect email 
--- Comment: E-mail address doesn't work. This bounces back: 
 
Your message to <[email protected]> was automatically rejected: 
Quota exceeded (mailbox for user is full) 
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!