Unable to access network share files from one server


Recommended Posts

Hi all,

 

Unable to access network files (e.g. \\servername\c$) from newly build windows server 2012.

FYI, By IP address of target network server we can access the ping, RDP as well as network files, and if we do 2012 server reboot then this will work for 2-3 days or longer as a week. 

This issue occurred for just for one single server others 700 servers are working as expected.

Guys, please help me for this issue.    

 

 

  On 20/03/2014 at 11:32, Chandgude said:

Then how it will works after win2012 server reboot?? 

 

One more information I would like to add, If I tried to access same network server from any windows 2008 or other 2012 servers it is working fine. but same userID this is not working in one particular windows server 2012. 

And what error do you get?  From a command line when you try and access \\servername\c$ what do you get for an error?

 

net use \\servername\c$

 

do you get access denied and asked for credentials?  Do you have any other sessions open to this machine?  You say you can access not admin shares just fine?

 

Are you sure the shares are there?  They could be recreated on reboot.. So what does net share look like when ran on the server?

 

exmaple

 

post-14624-0-09940200-1395315814.png

 

 

edit:

"but same userID this is not working in one particular windows server 2012."

 

That points to this box you can not access other server from having a session open to the server that does not have the rights to access the admin shares to me - your saying it can access other network shares?  Check what sessions this machine has open.  For example if something mapped to this server as user X, you can then not access server as user Y.

  On 20/03/2014 at 11:32, Chandgude said:

Then how it will works after win2012 server reboot??

Your OP wasn't clear, sorry.

Maybe someone is messing around with permissions or they are getting reset...

What is the exact error when you try to access the network share?

  On 20/03/2014 at 11:43, BudMan said:

And what error do you get?  From a command line when you try and access \\servername\c$ what do you get for an error?

 

net use \\servername\c$

 

do you get access denied and asked for credentials?  Do you have any other sessions open to this machine?  You say you can access not admin shares just fine?

 

Are you sure the shares are there?  They could be recreated on reboot.. So what does net share look like when ran on the server?

 

exmaple

 

attachicon.gifadminshares.png

 

 

edit:

"but same userID this is not working in one particular windows server 2012."

 

That points to this box you can not access other server from having a session open to the server that does not have the rights to access the admin shares to me - your saying it can access other network shares?  Check what sessions this machine has open.  For example if something mapped to this server as user X, you can then not access server as user Y.

 

Hi Budman,

 

net use \\servername\c$  

Got below error message,

 

System error 64 has occurred.
 
The specified network name is no longer available.
 
by IP it's gave success msg...
 
But same I have tried on my 2008 server there I got, The command completed successfully message
Also i have tried from three different userID from different machines and we successfully access the \\servername\c$.

So that is a really generic error.. what do you get when you do net view \\servername ?

 

Your saying you can access all the other shares on this box, just not C$ from this location?

  On 20/03/2014 at 12:55, BudMan said:

So that is a really generic error.. what do you get when you do net view \\servername ?

 

Your saying you can access all the other shares on this box, just not C$ from this location?

 

Same issue for \\servername, or \\Servername\c$ or servername\D$... 

My concern is only that what is the reason that am not able to access network server from one 2012 server????

 

let me clear the scenario, 

 

e.g. I have below servers in my organization. 

 

PC1 = Hostname is SCCMwin2012

PC2 = Hostname is SQLwin2008

PC3 = Hostname is webwin2008

PC4 = Hostname is SCOMwin2012

PC5 = Hostname is DCwin2008

PC6 = Hostname is DHCPwin2008

PC7 = Hostname is Serverwin2008

PC8 = Hostname is server2win2012

 

All above machine in one domain, and can be ping each other, accessing data by using \\servername\**$ (any drive) but but but.

 

from PC1(SCCMwin2012) can not access data of server PC2 (SQLwin2008). (\\servername, \\servername\C$ any share not working here.) if I do reboot SCCMwin2012 server then only able to access SQLwin2008 data from network.

 

pls let me know if in case still any concerns. 

\\servername doesn't work....hmmm, active directory?  if so what are your dns servers in ip properties (ipconfig/all)...sounds like  you are trying to resolve by name and you can't, if you can connect via IP address. 

  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:
 
  On 20/03/2014 at 16:20, CCS-IT said:

 

  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:

 

Found following events in windows server 2012 machine.... {ID 30620, Warning_Microsoft-Windows-SMBClient Microsoft-Windows-SMBClient/Operational - Connection to server \servername IP Address x.x.x.x:445 was aborted.}

 

FYI. NIC MTU is set as 1500 on source and destination machine. 

So your saying this SCCMwin2012 can not access any other server?  And if you reboot it you can only access the one SQLwin2008 box?

 

how are you checking mtu? 

 

C:\>netsh interface ipv4 show subinterfaces

   MTU  MediaSenseState   Bytes In  Bytes Out  Interface
------  ---------------  ---------  ---------  -------------
4294967295                1          0      23269  Loopback Pseudo-Interface 1
  1500                5          0          0  Wireless Network Connection
  1500                1  347094734   21410209  Local Area Connection
  1500                5          0          0  Local Area Connection* 11
  1400                5          0          0  Local Area Connection* 17
  1500                1   21162628    1569741  vpn

 

This show 1500?

  On 20/03/2014 at 18:59, BudMan said:

So your saying this SCCMwin2012 can not access any other server?  And if you reboot it you can only access the one SQLwin2008 box?

 

how are you checking mtu? 

 

C:\>netsh interface ipv4 show subinterfaces

   MTU  MediaSenseState   Bytes In  Bytes Out  Interface

------  ---------------  ---------  ---------  -------------

4294967295                1          0      23269  Loopback Pseudo-Interface 1

  1500                5          0          0  Wireless Network Connection

  1500                1  347094734   21410209  Local Area Connection

  1500                5          0          0  Local Area Connection* 11

  1400                5          0          0  Local Area Connection* 17

  1500                1   21162628    1569741  vpn

 

This show 1500?

 

Yes, I checked MYU by using same command as you mentioned. and I sow 1500 MTU from that command output.

 

SCCMwin2012 can access all servers which are listed in my previous post, except  SQLwin2008... I can ping SQLwin2008 from SCCMwin2012 server but can not access the RDP as well as data from SQLwin2008 machine. 

"but can not access the RDP as well as data from SQLwin2008 machine. "

 

Well RDP is completely different -- do you get prompted for access and denied, or get told can not find.. What error do you get when you try and RDP to its IP address.  And your saying other machines can rdp to sqlwin2008 just fine.

Budman,

As per the weekend patching we have rebooted SQLwin2008 server, hence as I told earlier post that after reboot issue getting resolved and now we all are accessing the server resources from our WinSCCM2012 machine.

 

FYI error msg: "Specified network name is no longer available" while accessing network data.. (\\servername\c$) if we do \\10.xx.xx.xx\c$ it's accessible perfectly. 

 

I'll keep you posted once issue re-occur.

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The Teams Admin center is still a mess. I use it all the time. They really need to talk with the Intune or Entra ID folks for help.
    • Senua's Saga: Hellblade II to get 60FPS mode, dev commentary, and more alongside PS5 launch by Pulasthi Ariyasinghe Back in May, Microsoft revealed Senua's Saga: Hellblade II as the next first-party Xbox game to reach PlayStation platforms. Now, that release has an official release date attached to it, and alongside it, developer Ninja Theory is releasing an update across all platforms with some major features, including a 60 FPS mode on consoles. The Performance Mode is easily the biggest addition to the story-focused immersive experience. Ninja Theory is delivering it to both Xbox Series X and PlayStation 5 players, but there is some bad news for Series S owners, as it is being left out from the upgrade. "The result is smoother gameplay, especially noticeable during combat and fast-moving moments of the game," says the developer. It's unclear how much of the game's visuals Performance Mode users will be missing out on compared to the default 30FPS "cinematic" mode. PC players are getting an upgrade too. A Very High preset is being added to the settings menu for those wanting even higher fidelity graphics. Optimizations have also been a focus on PC, and Ninja Theory says that the title will be Steam Deck Verified when the Enhanced update lands in August. Next, similar to the original, Dark Rot is incoming as an optional experience that players can enable when starting a campaign. This will have a rot effect being applied to Senua every time she dies, and if it ever reaches her head, the game will come to an end, with all progress from that save being wiped. The Photo Mode in Hellblade II is being upgraded with this update too, with the studio touting a new Motion tab for cinematic video capture, as well as improvements across the board to the feature. Lastly, four hours of developer commentary is being added to give a behind-the-scenes look at how the studio crafted the story and gameplay. "Hear from the ensemble cast, key collaborators in depicting Senua’s experience of psychosis, and members of the development team who poured their heart and soul into Senua’s story," says the studio. The Senua’s Saga: Hellblade II Enhanced comes out on August 12 across PC, Xbox Series X|S, and PlayStation 5 for all owners and Game Pass subscribers as a free upgrade. As for the PlayStation 5 launch of Senua’s Saga: Hellblade II that's happening on the same day, Microsoft will be offering two versions: Standard and Deluxe. As expected, Standard includes the complete base game for $49.99, but Deluxe goes further by adding on a copy of the first game, Hellblade: Senua’s Sacrifice, as well as its original soundtrack. The Deluxe Edition costs $69.99 to purchase.
    • Not sure what you’re talking about. Has been there for quite a while and in the latest versions it’s actually quite good. I use it several times a day as I am a terrible typist.
    • They should've called it Neolin, what a missed opportunity, IMHO!
  • Recent Achievements

    • One Month Later
      Epaminombas earned a badge
      One Month Later
    • One Year In
      Bert Fershner earned a badge
      One Year In
    • Reacting Well
      ChrisOdinUK earned a badge
      Reacting Well
    • One Year In
      Steviant earned a badge
      One Year In
    • One Month Later
      Steviant earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      549
    2. 2
      ATLien_0
      209
    3. 3
      +FloatingFatMan
      173
    4. 4
      Michael Scrip
      152
    5. 5
      Som
      143
  • Tell a friend

    Love Neowin? Tell a friend!