Unable to access network share files from one server


Recommended Posts

Hi all,

 

Unable to access network files (e.g. \\servername\c$) from newly build windows server 2012.

FYI, By IP address of target network server we can access the ping, RDP as well as network files, and if we do 2012 server reboot then this will work for 2-3 days or longer as a week. 

This issue occurred for just for one single server others 700 servers are working as expected.

Guys, please help me for this issue.    

 

 

  On 20/03/2014 at 11:32, Chandgude said:

Then how it will works after win2012 server reboot?? 

 

One more information I would like to add, If I tried to access same network server from any windows 2008 or other 2012 servers it is working fine. but same userID this is not working in one particular windows server 2012. 

And what error do you get?  From a command line when you try and access \\servername\c$ what do you get for an error?

 

net use \\servername\c$

 

do you get access denied and asked for credentials?  Do you have any other sessions open to this machine?  You say you can access not admin shares just fine?

 

Are you sure the shares are there?  They could be recreated on reboot.. So what does net share look like when ran on the server?

 

exmaple

 

post-14624-0-09940200-1395315814.png

 

 

edit:

"but same userID this is not working in one particular windows server 2012."

 

That points to this box you can not access other server from having a session open to the server that does not have the rights to access the admin shares to me - your saying it can access other network shares?  Check what sessions this machine has open.  For example if something mapped to this server as user X, you can then not access server as user Y.

  On 20/03/2014 at 11:32, Chandgude said:

Then how it will works after win2012 server reboot??

Your OP wasn't clear, sorry.

Maybe someone is messing around with permissions or they are getting reset...

What is the exact error when you try to access the network share?

  On 20/03/2014 at 11:43, BudMan said:

And what error do you get?  From a command line when you try and access \\servername\c$ what do you get for an error?

 

net use \\servername\c$

 

do you get access denied and asked for credentials?  Do you have any other sessions open to this machine?  You say you can access not admin shares just fine?

 

Are you sure the shares are there?  They could be recreated on reboot.. So what does net share look like when ran on the server?

 

exmaple

 

attachicon.gifadminshares.png

 

 

edit:

"but same userID this is not working in one particular windows server 2012."

 

That points to this box you can not access other server from having a session open to the server that does not have the rights to access the admin shares to me - your saying it can access other network shares?  Check what sessions this machine has open.  For example if something mapped to this server as user X, you can then not access server as user Y.

 

Hi Budman,

 

net use \\servername\c$  

Got below error message,

 

System error 64 has occurred.
 
The specified network name is no longer available.
 
by IP it's gave success msg...
 
But same I have tried on my 2008 server there I got, The command completed successfully message
Also i have tried from three different userID from different machines and we successfully access the \\servername\c$.

So that is a really generic error.. what do you get when you do net view \\servername ?

 

Your saying you can access all the other shares on this box, just not C$ from this location?

  On 20/03/2014 at 12:55, BudMan said:

So that is a really generic error.. what do you get when you do net view \\servername ?

 

Your saying you can access all the other shares on this box, just not C$ from this location?

 

Same issue for \\servername, or \\Servername\c$ or servername\D$... 

My concern is only that what is the reason that am not able to access network server from one 2012 server????

 

let me clear the scenario, 

 

e.g. I have below servers in my organization. 

 

PC1 = Hostname is SCCMwin2012

PC2 = Hostname is SQLwin2008

PC3 = Hostname is webwin2008

PC4 = Hostname is SCOMwin2012

PC5 = Hostname is DCwin2008

PC6 = Hostname is DHCPwin2008

PC7 = Hostname is Serverwin2008

PC8 = Hostname is server2win2012

 

All above machine in one domain, and can be ping each other, accessing data by using \\servername\**$ (any drive) but but but.

 

from PC1(SCCMwin2012) can not access data of server PC2 (SQLwin2008). (\\servername, \\servername\C$ any share not working here.) if I do reboot SCCMwin2012 server then only able to access SQLwin2008 data from network.

 

pls let me know if in case still any concerns. 

\\servername doesn't work....hmmm, active directory?  if so what are your dns servers in ip properties (ipconfig/all)...sounds like  you are trying to resolve by name and you can't, if you can connect via IP address. 

  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:
 
  On 20/03/2014 at 16:20, CCS-IT said:

 

  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:
  On 20/03/2014 at 13:59, CCS-IT said:

 

Found following events in windows server 2012 machine.... {ID 30620, Warning_Microsoft-Windows-SMBClient Microsoft-Windows-SMBClient/Operational - Connection to server \servername IP Address x.x.x.x:445 was aborted.}

 

FYI. NIC MTU is set as 1500 on source and destination machine. 

So your saying this SCCMwin2012 can not access any other server?  And if you reboot it you can only access the one SQLwin2008 box?

 

how are you checking mtu? 

 

C:\>netsh interface ipv4 show subinterfaces

   MTU  MediaSenseState   Bytes In  Bytes Out  Interface
------  ---------------  ---------  ---------  -------------
4294967295                1          0      23269  Loopback Pseudo-Interface 1
  1500                5          0          0  Wireless Network Connection
  1500                1  347094734   21410209  Local Area Connection
  1500                5          0          0  Local Area Connection* 11
  1400                5          0          0  Local Area Connection* 17
  1500                1   21162628    1569741  vpn

 

This show 1500?

  On 20/03/2014 at 18:59, BudMan said:

So your saying this SCCMwin2012 can not access any other server?  And if you reboot it you can only access the one SQLwin2008 box?

 

how are you checking mtu? 

 

C:\>netsh interface ipv4 show subinterfaces

   MTU  MediaSenseState   Bytes In  Bytes Out  Interface

------  ---------------  ---------  ---------  -------------

4294967295                1          0      23269  Loopback Pseudo-Interface 1

  1500                5          0          0  Wireless Network Connection

  1500                1  347094734   21410209  Local Area Connection

  1500                5          0          0  Local Area Connection* 11

  1400                5          0          0  Local Area Connection* 17

  1500                1   21162628    1569741  vpn

 

This show 1500?

 

Yes, I checked MYU by using same command as you mentioned. and I sow 1500 MTU from that command output.

 

SCCMwin2012 can access all servers which are listed in my previous post, except  SQLwin2008... I can ping SQLwin2008 from SCCMwin2012 server but can not access the RDP as well as data from SQLwin2008 machine. 

"but can not access the RDP as well as data from SQLwin2008 machine. "

 

Well RDP is completely different -- do you get prompted for access and denied, or get told can not find.. What error do you get when you try and RDP to its IP address.  And your saying other machines can rdp to sqlwin2008 just fine.

Budman,

As per the weekend patching we have rebooted SQLwin2008 server, hence as I told earlier post that after reboot issue getting resolved and now we all are accessing the server resources from our WinSCCM2012 machine.

 

FYI error msg: "Specified network name is no longer available" while accessing network data.. (\\servername\c$) if we do \\10.xx.xx.xx\c$ it's accessible perfectly. 

 

I'll keep you posted once issue re-occur.

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • OpenAI announces o3 Pro, its most intelligent reasoning model by Pradeep Viswanathan OpenAI today announced o3-pro, its flagship reasoning model that uses more compute to "think harder" and provide consistently better answers. This new model will be replacing o1-pro in ChatGPT since it consistently performs better in math, science, and coding. To help everyone make the most out of the model, o3-pro supports tool calling. So, based on the user prompt, the model can do a web search, analyze files, reason about visual inputs, use Python, personalize responses using memory, and more. This is a big improvement over o1-pro, which lacked access to tools. But the downside is that o3-pro will take more time to respond. OpenAI recommends users use o3-pro in cases where reliability matters more than speed. According to OpenAI's evaluations, users consistently preferred o3-pro's responses over o3 in key domains like science, education, programming, business, and writing help. o3-pro was also rated consistently higher for clarity, comprehensiveness, instruction-following, and accuracy. The new o3-pro model is available in ChatGPT's model picker for Pro and Team. ChatGPT's Enterprise and Edu users will get access to this latest model next week. For developers, the o3-pro model comes with a 200,000 context window and is priced at $20 per million input tokens and $80 per million output tokens. OpenAI recommends developers use background mode with o3-pro to prevent timeouts. And the model has a May 31, 2024 knowledge cutoff. The OpenAI team also noted the following as the current limitations of the o3-pro model: At the moment, temporary chats are disabled for o3-pro as we resolve a technical issue. Image generation is not supported within o3-pro—please use GPT-4o, OpenAI o3, or OpenAI o4-mini to generate images. Canvas is also currently not supported within o3-pro. As OpenAI continues to refine its models, the balance between speed and reliability will likely remain a key consideration for users choosing the right tool for their needs.
    • What annoys me is updates take forever to install on my Pixel 9 Pro XL, it was never so slow on my Samsung devices.
    • Still waiting for Android freaking 15 (One UI 7) on my (supported) Samsung phone and Google is already moving on to 16...
    • PS I just contacted patch for a free trail, But I'm sure that I'm gonna pay for another 5 years of win10 My acer laptop is now almost 6 years old, it's an old school laptop; I can open it with my iFixit toolset, I clean it every 6 months, I can replace a lot parts without any problems it will run another 5 years no matter what. If I need I have the money to buy a frame.work laptop with heavy specs. That will do for a many of years
  • Recent Achievements

    • Reacting Well
      rshit earned a badge
      Reacting Well
    • Reacting Well
      Alan- earned a badge
      Reacting Well
    • Week One Done
      IAMFLUXX earned a badge
      Week One Done
    • One Month Later
      Æhund earned a badge
      One Month Later
    • One Month Later
      CoolRaoul earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      ATLien_0
      269
    3. 3
      +FloatingFatMan
      209
    4. 4
      +Edouard
      203
    5. 5
      snowy owl
      140
  • Tell a friend

    Love Neowin? Tell a friend!