Recommended Posts

It's been a while since I last posted a review, during hibernation I've had time to absorb what the new NAD D 3020 stereo amplifier has to offer and put it through its paces in all everyday areas and bring to you a review from the point of view of a user who appreciates quality sound at a price point that makes it a unique option for those who want an all in one package without sacrificing the good stuff.

av_NAD-D3020_box_2.jpg

Enter the D 3020. Debate is open as to what the D stands for, some reviewers say it's based on the Class D classification of the unit while others note it for the Digital credentials. Whatever it means, NAD left nothing out when marketing it as the modern day 3020.

The original 3020 came out in the late late 1970s and really put NAD on the map. It was affordable and was capable of powering big speakers outputting high quality sound. o much so they sold by the truck load and the 3020 gained a sort of cult status. I never owned one, it was before my time but from what I've seen from my research and what others have told me, it really was a game setter and remained so many years after release.

 

av_NAD-D3020_on_2.jpg

I've owned a bunch of stereo integrated amps over the years (Cambridge Audio Azure 350, Rotel RA01, NAD C320 Bee, NAD C325 Bee) and a receiver (Technics something something modelnumberIforget). One thing I've always read and even experienced was how "The NAD Sound" stood out from the rest. By stood out I don't mean better or worse than the competition but just different in its own way and I think that's one reason why I and many others stuck with the brand from the moment we got our first NADs. It;s just a pleasing and warm sound with a headphone output that was equally capable and all at a price that didn't break the bank.

 

So why have NAD called the D 3020 a Hybrid? It's a jack of all trades really. It doesn't excel in any single area but neither does it fall short either. It's good all round and certainly will satisfy newcomers into quality audio as it will seasoned audiophiles looking to add digital connectivity to their already established setup.

 

Initially NAD were going to send me a review unit as I posed interest in buying one but really wanted to sample one first, what a better way to do that than to get one in for review and kill 2 birds with one stone I thought but sadly as is the case with new gadgets, the review units were out on loan for a long time and I simply could not wait. I found a local Sevenoaks store with them in stock for ?400 and their then deal included a Chord 1 metre optical cable worth ?50 for free. I sold the cable on eBay a week later for ?30. Hello free money  ;)

 

av_NAD-D3020_side_2_2.jpg

 

The unit itself is very small, if you  have seen a Nintendo Wii in the flesh (let's face it, who hasn't!) then you can pretty much imagine a black Wii and that's the D 3020 right there in pretty much both weight and dimensions.

 

The front and top of the unit has a single piece of piano black glossy plastic and the sides are rubbery matte with metal air grilles on the lower area of each side. The volume dial is plastic but is dampened and has a nice feel to it when turning, it's smooth and the whole dial itself sits cushioned which feels reassuring and safe.

 

av_NAD-D3020_standby_2.jpg

 

On top of the amp we have the pair of touch controls. The power button and the Source select button. The power button glows orange in standby mode. Initially he amp would go into standby mode if no signal was being processed for 15 minutes. A firmware update changed this to 30 minutes not long later and added the option to turn auto sleep off which I found very welcome as I was getting a bit tired of returning to my desk to find the unit off as I hit play on music or a video and the player complaining that no audio device was found (I use the USB connection, more on that later).

 

av_NAD-D3020_cables.jpg

 

The rear of the unit houses all the main digital and analogue ins and outs. Each socket is solid in feel and looks high quality. There is a hefty click clunk as you plug in the optical cable, a heavy glide as you insert the USB cable and snug posts for your speaker cables be they banana terminated or bare wire. The mains AC plug uses the Laptop style Mickey mouse head which is different but nothing really abnormal given the size of the unit itself. Thankfully no power bricks to worry about here.

 

av_fideliox1_6.jpg

 

I've been using this on my PC setup and as the primary sound source. I used to have an Asus Xonar Essence STX soundcard in the PC connected to the C325 amp before this but I was so impressed with the D 3020 that once I had used it a month I sold the soundcard and other bits.

 

Sound quality wise this little thing is splendid. I learnt from a few online sources that the D 3020 uses Hypex components inside and further research revealed Hypex are no small fry. Many established amps carrying their components cost 4 figures.

 

My unit is connected via Asynchronous USB to the PC and it's powering a pair of Tannoy Mercury V4 floorstanders. The 30 watts per channel is a very conservative figure as is the case with most NAD amps. The sound output pushes way above this limit and I found this amp was capable of pushing these speakers beyond what the C 325 Bee was capable of even though  that amp had a higher wattage rating.

 

I noticed a curious thing with the USB connection too and maybe it's more related to my motherboard than anything else but when setting the sample rate in Windows 7 I noticed that 16bit exhibited a very faint hiss in the background only audible at VERY high volume when there was nothing else playing. It's the kind of hiss reminiscent of an analogue amp when you turn the dial all the way up when nothing is playing and hear a hiss.

 

Setting the sample rate to 24bit removed this hiss completely and it was as pure and clean a sound as can be. I've since set the Windows output to 24bit 48KHz. There's no need to set it any higher for playback means. Human ears cannot hear above 44.1KHz but I figure why downsample 48KHz audio as found in movies when it can be transmitted without change. Audible difference or not the option was there so it's being used.

 

av_fideolio_ultrahighres_not_2.jpg

 

For headphone connectivity at the time of purchase I owned the Sennheiser HD595 but I then upgraded to the HD598 and also bought the fairly new Philips Fidelio X1 and decided I would keep whichever was the better of the two. I kept the X1. For headphones the D 3020 is no slouch either. The X1s are rated at 30ohms so easy to drive in the first place but what is really surprising is how well they match with this amp. The sound is natural, full of life and warm. The bass goes low, very low but remains tight and completely detailed. The experience is really sublime. Details are crystal clear and this was one area that more technical reviews online praised the D 3020, the level of detail it brings out in music and movies is staggering given how small the unit is.

 

If I had not heard about this amp and someone walked me into a room with just a pair of floorstanders in view and the amp hidden away I'd have sworn it was something big powering them. Something that carried a 4 figure price tag.

 

I feel I may have waffled on a bit and haven't even touched on the other features. Bluetooth connection is supported and it uses the apt-x codec for near  CD quality sound transmission from a compatible device. if your device does not support this codec then you'll just use normal Bluetooth which is also fine on the most part but really apt-x is where it's at. Thankfully most new smartphones and tablets should support this. I used it with a Samsung Galaxy Note 2 and 3 and the quality was exactly as CSR advertise on their apt-x technical pages. When I decided to buy this amp the bluetooth feature was one big selling point and I was happy to see it lived up to expectations.

 

The remote control NAD give with this (which can be seen in the middle of the first photo in the review) is powered by a CR2032 battery and is infrared (NAD say just "Wireless" on their site leading you to assume it's Bluetooth or RF). The remote has all the controls the amp has with the addition of muting the volume.  I find using the remote a more pleasant experience because the touch panel buttons don't really do anything for me and you end up with finger smudges all over that nice glossy panel.

 

Sevenoaks told me their in store demo unit took about 2 weeks to break in and sound proper. Others who purchased around the same time I did on other forums noted a few weeks of burn in time too and I cannot confirm or deny with 100% certainty that break in has occurred on mine or not but I do feel that the sound I'm hearing now is richer and the bass goes lower than what it did during the first week of usage.

 

It's worth noting that some of this may well be attributed to the warming up of components inside the amp and I'll tell you one thing, the D 3020 certainly warms up. If no headphones are connected then both sides will get quite hot. You can still touch without burning yourself but I found that none of my other amps got so hot. With headphones plugged in the amp does not heat up quite so much and merely only gets as warm as a modern computer monitor does.

 

Gaming. I play mostly STEAM titles and for online I play TF2. I found no issues or major differences using the D 3020 over the Essence STX here. All the games I play have dedicated Stereo options in their audio settings. I also have a PS3 connected via optical and the same carries over here. Use stereo mode and enjoy nice sound, well, as nice as the sound the game has anyway :p

 

To conclude I am happy to say that after some months of owning this amp I really don't have any major negatives to report. Yes the touch buttons are more gimmicky than functional  but the remote solves the problem of having to smear smudges all over what is essentially a piece of desktop art - No touching!

 

I think for ?400 people are getting an all in one package that's very hard to beat and will very easily last several years at least providing you intend on staying 2 channel. I have no problem with this and in most instances I actually prefer 2 channel for my computer audio.

 

It's also nice to see NAD have listened to users and provided a couple of firmware updates  to fix bugs and add features. Also regarding the update process, all done via the USB cable and no different to updating the firmware on a smartphone or other USB connected device, just a few clicks and it's all done.

 

NAD also provide the remote codes should you wish to input them into a media centre remote or one of those universal all in one remotes if you don't like having multiple controllers lying around.

 

Overall I would give the D 3020 a solid 9 out of 10. A point lost for the touch buttons really but I'm nitpicking here as I really cannot fault it anywhere else.

 

 

 

Footnote: I thought I'd add that I have had 2 D 3020s, this is the 2nd one. The first one had a pretty obvious fault whereby the source select cycled all on its own randomly. I took it back to Sevenoaks who were really helpful and understanding and even in store it was doing it. A direct swap later and this one is perfect. I have not read of the same issue online with anyone else so looks like I just got unlucky that time.

  • Like 3
  • 2 weeks later...

I am currently using two D 3020s, one powering electrostatic panels, the other feeding subwoofers. Since I am always listening at low volumes, the tiny NADs offer enough power for the job. (I am controlling both amps with a single remote) Although both amps are working very well I am concerned that they tend to get rather hot. For lack of space cannot use them in upright position but horizontally, supported by 1" feet to ensure full air circulation through the small cooling slots. However, after an hour or two both amps get rather hot on the top side, especially the subwoofer amp which also exudes a faint smell of hot electronics. I wonder if this is going to shorten the life span of the NADs. As a simple remedy I am going to install a small fan either under the cooling slot or blowing along the top side. Don't know if this will work. 

I am currently using two D 3020s, one powering electrostatic panels, the other feeding subwoofers. Since I am always listening at low volumes, the tiny NADs offer enough power for the job. (I am controlling both amps with a single remote) Although both amps are working very well I am concerned that they tend to get rather hot. For lack of space cannot use them in upright position but horizontally, supported by 1" feet to ensure full air circulation through the small cooling slots. However, after an hour or two both amps get rather hot on the top side, especially the subwoofer amp which also exudes a faint smell of hot electronics. I wonder if this is going to shorten the life span of the NADs. As a simple remedy I am going to install a small fan either under the cooling slot or blowing along the top side. Don't know if this will work. 

 

As you've got 2 in the same space I don't know what to recommend in this instance sadly! I know my one gets hot enough so can only imagine how hot yours get though I've not experienced any issues at all on mine. I guess it's designed with this in mind though. The smell coming from the heat seems to be quite normal. Mine, even when warm, radiates the fragrance of warm electronic components :D

Thank you, m.v.c., for your helpful comment. I also found two more posts stating that the 3020 runs rather hot. By the way, my two 3020s are located at some distance and can't combine the heat they emit.

Another possibility to mitigate the heat problem occurred to me: I could buy a third 3020 and split the subwoofer signal between two amps, using only one channel each. In this way the switching power supply available to the woofers would be doubled. Sounds like an expensive approach but isn't really because of the modest price per unit.

As regards the sound quality heard through the electrostats I suppose Sam Tellig of Stereophile is quite believable when he said  "I'm buying the D 3020 to make it my reference integrated amp," In my mind,  the small 3020 deserves some unusual efforts to lift it to still higher performance levels. 

cheminee.jpg

 

The entire system is hidden under furniture and in this unused fireplace: a dvd as transport, 1 Behringer SRC upsampler, 2 Behringer DEQ processor/equalizers (one for the 'stats; one for the subs) and two NADs, see arrows. More on https://stentore.com/en/

  • 4 weeks later...
This topic is now closed to further replies.
  • Posts

    • Microsoft released Windows 11 KB5094149 / KB5095971 / KB5094156 Setup, Recovery updates by Sayan Sen Earlier this week Microsoft released its newest Patch Tuesday updates (KB5094126 / KB5093998 on Windows 11 and KB5094127 on Windows 10). Alongside those, Microsoft also released new dynamic updates. These Dynamic Update packages are meant to be applied to existing Windows images prior to their deployment. Dynamic Updates also help preserve Language Pack (LP) and Features on Demand (FODs) content during the upgrade process. VBScript, for example, is currently an FOD on Windows 11 24H2. This time both recovery and setup updates were released for Windows 11 as well as Windows 10. The company writes: "KB5095185: Safe OS Dynamic Update for Windows 11, version 26H1: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.28000.2269. KB5094149: Safe OS Dynamic Update for Windows 11, versions 24H2 and 25H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.26100.8655 KB5095971: Setup Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to Windows setup binaries or any files that setup uses for feature updates in Windows 11, version 23H2. KB5094156: Safe OS Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.22621.7219 KB5098815: Windows Recovery Environment update for Windows 10, version 21H2 and 22H2: June 9, 2026 This update automatically applies Safe OS Dynamic Update (KB5094154) to the Windows Recovery Environment (WinRE) on a running PC. The update installs improvements to Windows recovery features. KB5094154: Safe OS Dynamic Update for Windows 10, versions 21H2 and 22H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.19041.7417. KB5094153: Safe OS Dynamic Update for Windows 10, version 1809 and Windows Server 2019: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.17763.8880. KB5094152: Safe OS Dynamic Update for Windows 10, version 1607 and Windows Server 2016: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.14393.9234." Microsoft notes that both the Recovery and Setup updates will be downloaded and installed automatically via the Windows Update channel.
    • Quantum Error Correction Validated in Nature: Microsoft and Quantinuum Log 800-Fold Improvement Two years after the original press-release announcement, independently peer-reviewed results published in Nature on June 10, 2026, have confirmed that Microsoft and Quantinuum achieved an 800-fold reduction in quantum error rates on real trapped-ion hardware — the largest gap between physical and logical error rates ever independently validated.    What Quantum Error Correction Actually Does — and Why Breaking Even Is Hard https://www.techtimes.com/articles/318329/20260613/quantum-error-correction-validated-nature-microsoft-quantinuum-log-800-fold-improvement.htm   Quantum Computing Wiring Bottleneck Cracked by HKU Silicon Carbide Chip at Qubit Temperature Engineers at the University of Hong Kong have built the first cryogenic control chip that operates at the same temperature as superconducting qubits — 10 millikelvin, or just one-hundredth of a degree above absolute zero — without generating the heat that has forced every competing approach to park its electronics hundreds of meters of cable away. https://www.techtimes.com/articles/318325/20260613/quantum-computing-wiring-bottleneck-cracked-hku-silicon-carbide-chip-qubit-temperature.htm  
    • RevPDF 4.5.0 by Razvan Serea RevPDF is a free, fully offline PDF editor for Windows, macOS, and Linux that lets you edit text and images directly inside PDF files — no internet connection, no account, and no cloud uploads required. Unlike bloated alternatives that demand subscriptions and constant connectivity, RevPDF fits in under 60MB on desktop while delivering a complete editing toolkit: annotate, redact, sign, compress, split, merge, convert, and reorganize pages, all processed locally on your device. Smart font matching ensures edited text blends seamlessly with the original, and multi-language support includes RTL scripts such as Arabic and Hebrew. Where most PDF editors force you to choose between features and simplicity, RevPDF manages both. You can build interactive forms from scratch with text fields, checkboxes, and dropdowns, permanently redact sensitive data before sharing, draw freehand on contracts and diagrams, and add custom watermarks — all without a single file leaving your machine. Edit Text and Images Directly Inside PDFs RevPDF supports true inline PDF editing — not just annotation layers on top of a document, but actual modification of existing text and images within the file. A smart font-matching engine identifies the font used in the original document and applies it automatically when you make edits, so changes blend naturally with the surrounding content. You can reposition elements, resize images, and update text across single pages or entire documents. RevPDF 4.5.0 release notes: This is one of the biggest updates to RevPDF yet. A lot of things people have been asking for are finally here. New Features Auto Redaction Permanently redact sensitive text and areas from your PDFs before sharing. Clean, irreversible, and fully offline. Comments, Links & Bookmarks Add comments for review, insert clickable links, and create bookmarks to jump around long documents without scrolling forever. Find & Replace Search across the whole document and replace text in one go. Long overdue. Split Pages Vertically or Horizontally Split any page down the middle, vertically or horizontally. Perfect for scanned books or double-page spreads. New Drawing Tools More tools for freehand drawing and markup, better for annotations, sketches, and detailed notes. Continuous Scrolling in Editor The editor now scrolls continuously through pages instead of jumping between them. Working through long documents is a lot smoother now. PDF Metadata Editor View and edit the metadata stored inside your PDFs, including title, author, subject, and keywords. Better Font Matching Text edits now blend in more naturally by doing a better job of matching the original font. Tabbed PDF Viewer Open multiple PDFs at once in tabs and switch between them without going back to the home screen. Add Links Insert hyperlinks anywhere in your PDF, to external URLs or to other pages within the document. Share & Print Shortcuts Share or print directly from the editing screen, home screen, and viewer. No extra steps. Minor Updates Paste images directly from clipboard into your PDF New image editing tools for more control over images inside documents Bug Fixes Fixed file saving issues on Windows and Linux Everything still works fully offline. No login, no cloud, no account. Your files stay on your device. Download: RevPDF 4.5.0 | 58.0 MB (Open Source) Links: RevPDF Home Page | Github | Screenshots 1 | 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Interesting. I'm not using a VPN with my phone. I tried though my home internet (Rogers) and my cellular internet (Telus) using their respective DNS servers and both trigger the dialog above.
    • Three days after Anthropic launched Claude Fable 5 as the most capable AI model it had ever released to the public, the United States government ordered it switched off — and now the company is refunding customers who paid to use a product that vanished almost overnight https://www.techtimes.com/articles/318342/20260613/us-government-pulls-anthropics-fable-5-offline-now-come-refunds-vanished-ai.htm  
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      91
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!