Driver beaten by crowd after hitting boy is in critical condition


Recommended Posts

Updated - more arrests, hate crime on the table and more....

http://m.detnews.com/metro/article?a=2014304070072&f=1211

4 in custody as Detroit beating probe widens into hate crime investigation

Detroit -- With four suspects now in custody, police and prosecutors are "widening the scope" of their investigation into last week's beating of a 54-year-old white motorist to include the possibility that the mob assault was a hate crime, Detroit Police Chief James Craig said Monday.

Two more suspects, ages 24 and 30, were arrested Monday in connection with the April 2 beating of Steven Utash of Clinton Township, while prosecutors announced charges against a 17-year-old and questioned a 16-year-old, both in custody.

Meanwhile, the victim remains in critical condition in a medically induced coma at St. John Hospital and Medical Center in Detroit.

Craig said reports that Utash was robbed by the mob are false.

"We're widening the scope of our investigation," Craig said when asked if the beating constituted a hate crime. "Both our strategy and the prosecutor's strategy is widening, and those factors are being looked into very closely. I can't reveal some things about our investigation, but that is definitely something we're considering."

Hate crimes may be charged locally or federally. In addition to federal laws, which carry up to 10 years in prison, Michigan ethnic intimidation statute is a two-year felony.

Maria Miller, spokeswoman for the Wayne County Prosecutor's Office, declined to comment on the hate crime aspect because the case is ongoing. Prosecutor Kym Worthy on Monday charged 17-year-old Bruce Edward Wimbush Jr. in connection with Utash's beating.

Wimbush is charged with assault with intent to murder and assault with intent to do great bodily harm.

He was to be arraigned Monday in 36th District Court, but the hearing was postponed, and will likely take place this morning, Miller said.

"The facts of this case are unbelievably tragic," Worthy said in a statement. "We have charged this defendant with a capital offense."

In reviewing a warrant request against the 16-year-old in custody, prosecutors are trying to determine whether he should be charged as an adult. That teen is being held in the Wayne County Juvenile Detention Center, according to Worthy.

"By law, the Wayne County Prosecutor's Office is able to take five days to determine whether the respondent will be charged as an adult," the prosecutor's office said.

The 16-year-old appeared in court Monday afternoon before Referee Anthony Crutchfield at the Juvenile Detention Center. The suspect is due back in court on Saturday.

Wimbush was ruled "incorrigible" by juvenile authorities in 2007, 2008 and 2010, according to court documents, although Wimbush's files were unavailable Monday. In Michigan, being ruled incorrigible means a minor is guilty of repeated, serious misconduct.

The 16-year-old, who will turn 17 on May 19, has a 2012 truancy incident on his record, court records show. His parents and other relatives left the Wayne County juvenile center downtown without commenting to reporters about the charges.

An elderly woman claiming to be the boy's relative said of Utash: "We pray he comes back to his natural state."

Utash, a tree-trimmer, was on his way home from work at about 4:10 p.m. when police say he accidentally struck 10-year-old David Harris near Morang and McKinney.

When Utash left his pickup to check on the boy, a group of about 12 men from the neighborhood began to beat him, police said.

Police said Utash was not at fault in the accident and that the 10-year-old is recovering.

Craig blamed "a culture of violence" for the situation.

"I've not seen this kind of violent culture in other cities," Craig said. "It certainly exists, but not to this extent. Several mornings ago, a 71-year-old man was beaten by a two-by-four. This happens in other places, too, but it's all too common here. And Detroiters are getting fed up. They're tired of being victims."

Craig said he's doing what he can to quell the city's violence, and pointed out that crime is down since he took over as chief in July.

As of late Monday afternoon, nearly $120,000 had been raised online to help with medical expenses for Utash, who is self-employed and did not have health coverage, relatives said. The original goal was $50,000. However, family members say the cost of his treatments is running $17,000 to $20,000 daily.

^I don't know about the kid--kids do dumb things, especially one growing up in a place like that. But the older guys that mobbed him? Yeah, I have to admit that if Utash had a gun, things probably wouldn't have turned out as badly as they did. Or maybe it would have been worse, since there's a good chance one of the people beating him up had one as well.

It's just impossible to feel any sympathies for the community involved here with this sort of mob mentality. It's disgraceful. All those involved should be sent to jail for a long time and we can only hope the driver makes a full recovery, although I'm sure the psychological scarring will last a lifetime. 

http://m.detnews.com/metro/article?a=2014304110078&f=1211

Detroit -- Steven Utash's relatives were cautiously optimistic Friday he may be slowly recovering from the wounds he suffered after being assaulted by a mob last week, although they say he's reliving the attack, thrashing in his hospital bed and calling for help.

Utash, a Clinton Township tree-trimmer whose April 2 beating made national headlines, is no longer in a coma, family members said.

"He is off the ventilator and is able to breathe on his own," Utash's daughter, Mandi Emerick, posted Friday morning on a website set up to raise funds to help pay medical costs for her father, who doesn't have health insurance.

"He is in and out of it with his memories," Emerick wrote. "Sometimes he can look at me and remember who I am and other times he can't. Today when I asked him how old he is he said 'I'm two years old' but he did know his name.

"He does keep saying 'I don't want to die. I'm sorry' and 'Please don't let me forget you.' He also keeps flashing back to the assault screaming for help and 'Please get them off me.' He didn't seem to know what happened to him or why he was in the hospital, but again it is way to(o) early to tell. He is also on many pain medications which are causing him to be delirious."

His brother-in-law Max Mohr, told The News that doctors decided Thursday to take off the ventilator.

"They put him on breathing treatments," he said. "He's coming in and out of consciousness. When he looked at Mandi yesterday, he started crying, then went back out. He knows who Mandi is, and he knows who (his son) Joe is, but he doesn't recognize his youngest daughter (Felicia).

"He's still pretty delirious," Mohr said. "He's been talking about people from 20 years ago. He was asking for my grandma; she's been dead for 6-7 years now."

In her written update, Emerick also expressed tentative optimism.

"These are baby steps," she wrote. "He is able to wiggle (h)is toes on command and answer yes or no questions. It's to(o) soon to tell if he's going to have any memory loss or long-term damage. The frontal lobe is what was affected the most and that is where his memories and personality are and this is a long road ahead but the end of the road will be worth it.

"It is so hard to see him like this."

In other developments Friday, a 19-year-old man was charged in connection with the April 2 beating, which happened when Utash got out of his truck to check on the well-being of a 10-year-old boy who was struck after he dashed into traffic in front of Utash's vehicle near Morang and Balfour on the city's east side.

Latrez Cummings is the latest suspect accused of taking part in the beating. Cummings, arrested Wednesday after a short foot chase, did not have an attorney present during his arraignment via video Friday in 36th District Court.

Magistrate Millicent Sherman entered a not guilty plea on his behalf after reading the charges against him: assault with intent to commit murder, and assault with intent to do great bodily harm.

Latrezz Cummings arraigned re: Utash beating. $500k bond April 11, 2014

The judge set bond at $500,000, the same as three other men -- Bruce Edward Wimbush Jr., a 17-year-old East English Preparatory Academy student; Wozney Saffold, 30, and James Deontae Davis, 24 -- who were arraigned earlier this week on the same charges.

All four defendants are scheduled for an April 21 preliminary examination to determine if they'll stand trial.

A 16-year-old, who was charged with assault and ethnic intimidation in the case is scheduled to be arraigned Saturday. A police source familiar with the investigation told The Detroit News he's the only one of the five suspects who mentioned Utash's race as a reason for assaulting him.

David Harris, the boy who was injured after surveillance video shows he darted into Steve Utash's path, suffered a minor leg injury.

The Utash family has raised nearly $159,000 in donations to the victim, a tree-trimmer who doesn't have medical insurance. The family has set up a trust fund for donations at P.O. Box 761 Warren MI 48090-0761.

steven-utash-and-kids1.jpg

http://m.detnews.com/metro/article?a=2014304150099&f=1211

Detroit mob beating victim slowly getting better

Detroit --Steve Utash is taking baby steps toward recovery.

The victim of a brutal April 2 mob beating who was in a medically-induced coma for more than a week, has walked a short distance in his hospital room, although he's still floating in and out of consciousness, his brother-in-law said Tuesday.

"He's standing and can walk a few steps," said Max Mohr. "He stands but can get about 2 steps and that's it. But that's great to us. It's only been 2 weeks (since the beating)."

Utash was driving home from his job as a tree-trimmer at about 4:10 p.m. April 2 when 10-year-old David Harris darted into the street in the path of Utash's truck, which slammed into the boy, injuring his leg.

When the 54-year-old Clinton Township resident exited his truck to check on Harris, a group that had been loitering near a gas station descended on him and began hitting and kicking him, according to police.

Retired nurse Deborah Hughes saw the attack from the window of her home, so she grabbed her .38 caliber pistol and ran to the scene, where she yelled at the mob to stop beating Utash before rendering first aid until an ambulance arrived.

Four men and a teenager have been charged with assault with intent to murder for their alleged roles in the beating. The teen, 16, was also charged with ethnic intimidation. A police source familiar with the investigation told The Detroit News the teen, described by prosecutors as the instigator of the incident, said during an interrogation that he attacked Utash because he is white.

Police continue to investigate the incident, Detroit Police Sgt. Michael Woody said.

"The leads are starting to dwindle down, but we're confident we got the key players involved," Woody said. "Obviously, we're not going to stop investigating, but the information is coming in a lot slower, which is an indication that we've got who we're after."

Utash, who suffered head injuries from the beating, has sometimes had trouble recognizing his family since he first awoke Thursday night, Mohr said.

"(Monday, Utash) did not know (his kids) again, but today he does," Mohr said. "He's a fighter."

The US Justice Dept. under Attorney General Holder is very reluctant to prosecute black on white hate crime, though this case may be extreme enough to change that. Can't wait for that PC POS to go.

Michigan's AG on the other hand, and especially our very tough (black) female County Prosecutor, will be all over it. They don't give a rip which way the color balance goes.

Whatever the colour of your ski, your sexuality, your religious status, your financial status, if you rob and near kill another human, you should be tried and tested in a court of law.

 

I would guarantee 1989 would happen again if whitey robbed browny because some elderly man was involved in a traffic violation, to which, the child could had been to blame.

 

The men and maybe women that robbed and assaulted the man should be incarcerated.

 

Instead of seeing to the child and making the child safe and healthy they would rather rob an elderly man.

 

Shame on them.

  • Like 1

Detroit ... it's not much of a surprise that they robbed him after beating him

Looks like they beat him because they wanted to rob him... these guys should be tried for attempted homicide (including the kid who got hit).

  • 1 month later...

UPDATE:

Thought I'd update Neowinians with some good news for a change.

Steven Utash was discharged from the rehabilitation hospital today and is home with his family.

He seems to be doing rather well under the circumstances; independent, walking around and enjoying his family, etc. but obviously he still has a lot of recovering to do. His memory is coming back.

(Y) (y)

  • Like 3

UPDATE:

Thought I'd update Neowinians with some good news for a change.

Steven Utash was discharged from the rehabilitation hospital today and is home with his family.

He seems to be doing rather well under the circumstances; independent, walking around and enjoying his family, etc. but obviously he still has a lot of recovering to do. His memory is coming back.

(Y) (Y)

 

That's good to hear. What happened to the criminals involved? Are they serving time yet?

One is out on bail & on a tether awaiting trial, and the others got such a high bail they're awaiting trial in the county jail. One is in juvie.

If I had to bet I'd guess the one on bail was a minor participant who ratted on the others for a reduced sentence.

The nurse who witnessed the attack, then stopped it by pulling her pistol on the mob while shielding Utash, is a local heroine.

  • 1 month later...

UPDATE: the dominos fell.

After the first perp confessed and gave state's evidence all the others saw the writing on the wall and pled GUILTY in court. Sentencing later.

 

With the guilty plea, will they get lighter sentencing?

  • 3 weeks later...

Wonzey Saffold, 30, got 6-10 years and serious tongue lashings from the judge and Utash's brother in a Victim Impact Statement.

The brother also thanked Deborah Hughes, a nurse who pulled her revolver and shielded Utash from further attacks.

Bruce Wimbush, 18, was sentenced to a long probation and drug monitoring. He hit Utash but wasn't part of the main attack and turned State's Evidence.

An unnamed minor, 16, was sentenced to a juvie residential facility.

Two more sentences Thursday.

This topic is now closed to further replies.
  • Posts

    • (I know it's just an image and also not the point at all, but it really bugs me that the two halves of the necklace don't really fit together... 😅)
    • It is the same everywhere. Gitlab's boss recently had a lengthily blog post about the future of AI in the company and in general. The usual drum beating. When I saw it I checked their stock prices - close to 50% down.
    • Cloud Security Fundamentals eBook —was $131.95, now free to download by Steven Parker Claim your complimentary copy (worth $131.95) of "Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms" for free, before the offer ends on July 1. Description In Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms, cybersecurity leader and educator, Jason Edwards, delivers a comprehensive guide to safeguarding data, applications, and infrastructure in the cloud. The author offers a complete walkthrough of cloud security, moving from foundational concepts to advanced, forward-looking practices. The book is filled with practical examples, hands-on guidance, and lessons drawn from real-world cloud security incidents and breaches. It equips readers with the tools and knowledge they need to defend against threats in cloud environments and how to understand coming developments in cloud technology that will impact organizations in all industries. Inside the book: A thorough introduction to cloud-native and advanced security practices for contemporary firms A chapter on relevant cloud security certifications and professional growth advice Practical discussions of foundational concepts in cloud security, including IAM, Zero Trust, and DevSecOps Complete treatments of advanced cloud security themes, like leadership strategies, operational best practices, and techniques for dealing with common and emerging threats Perfect for cloud security professionals, IT managers, and DevOps professionals, Cloud Security Fundamentals will also benefit system administrators, compliance and risk officers, consultants, auditors, and technology students in a variety of fields who require a foundational understanding of cloud security concepts. How to download for free Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these offers, you will not need to re-register. Was $131.95, but is now FREE | Below link offer expires on July 1. Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms The below offers are also available for free in exchange for your (work) email: The Vibe Coding Playbook: Building Your Tech Business with AI ($35 Value) FREE - Expires 6/23 The Persuasion Engine: How Any Business Can Use AI-Powered Neuromarketing to Understand and Win Customers ($28 Value) FREE - Expires 6/24 How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy ($28 Value) FREE - Expires 6/30 Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms ($131.95 Value) FREE - Expires 7/1 The Complete Free AI Learning: Master ChatGPT, Claude, Gemini & More ($21 Value) FREE How to Build an AI Design Workflow with Gamma ($21 Value) FREE The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • TerraMaster F4-425 Pro review: an octa-core Intel NAS that ships with AI (OpenClaw) by Steven Parker It has been a while since I reviewed a TerraMaster NAS, but the company reached out to me asking if I was willing to test the F4-425 Pro, which goes on sale today. It is an upgrade on the F4-425 Plus, which I reviewed back in October 2025 What you need to know is that it basically follows the design principles of the four-bay F4-425 series, with its all-metal exterior. Here are the most important specifications: TerraMaster F4-425 Pro CPU Intel Core N350 (8x E Cores/Threads, Max burst up to 3.9 GHz) Intel Core N305 (4x E Cores/Threads, Max burst up to 3.8 GHz) TDP: 7W / 9W (Base) Graphics Intel UHD Graphics 32 EUs (1.35 GHz) Intel UHD Graphics 24 EUs (1.25 GHz) Memory 1x slot 16 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) 1x slot 8 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) Disk Capacity 120 TB (30 TB x 4) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Network 2x RJ-45 5 GbE Internal storage 3x M.2 2280 NVMe Slot (PCIe 3.0 x1) Bootloader 2Gbit 256 GB NAND Flash card (MX30LF2G28AD) USB port (internal) USB Ports 1x Type-C 3.2 Gen 2 (10Gbps) 3x Type-A 3.2 Gen 2 (10Gbps) HDMI 1x (HDMI) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Size (H/W/D) 219 x 181 x 150 mm Weight 2.9 kg System Fan 150 x181 x 219 mm Power 90W, 100V - 240V AC, 50/60 Hz, Single frequency Power consumption (HDDs) 45W (4x 4TB ST4000VN008 in read/write state) 14W (4x 4TB ST4000VN008 in hibernation) Noise Level: 20.9 dB(A) Using 4 SATA HDDs/SSDs in standby mode; Test environment noise: 17.3dB(A); Test distance: 1m Warranty 2 Years OS TOS 7.0.0706 (Beta) MSRP £639.99, $699.99, €739.99 / £739.99, $799.99, €839.99 As you can see above, there are two variants of the F4-425 Pro releasing today. The lesser variant has the slightly weaker N305 CPU and iGP, and 8 GB less RAM, although it also costs $100 less than the top variant we are testing today. In addition, these new F4-425 Pros are shipped with the as-yet-unreleased TOS 7 beta. So what is TOS 7 exactly? During the device initialization, you are warned not to use it in a production environment, which we'll get into later. My contact told me that TOS 7 exits beta today, June 23 with version 7.0.0746. The clear difference with the F4-425 Plus is that it contains the more powerful N350 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, LPDDR5 (4800), DDR5 and DDR4, and a max TDP of just 7W. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Alder Lake-N series that sits just below the top N355 offering, albeit with an impressive TDP (less than the N355 and N305) for the features it offers. It is designed for low- powered systems and entry-level laptops. As before, we are seeing another NAS with an acceptable, if not great, amount of RAM. It should be noted that the F4-425 Pro only has one SODIMM slot, so if you are planning to upgrade the already 16GB included in this NAS, it will have to be on one module of Single Rank DDR5. As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. Before we dive in, you can view the different SKUs released so far since the 2025 series launched for Home and SMB users, with the most important specifications listed along with the MSRP listed below: SKU CPU Cores Memory Link Price F2-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $249.99 F4-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $369.99 F2-425 Plus Intel Core N150 4 8 GB DDR5 5 GbE x 2 $399.99 F4-425 Plus Intel Core N150 4 16 GB DDR5 5 GbE x 2 $569.99 F4-425 Pro Intel Core N305 8 8 GB DDR5 5 GbE x 2 $699.99 F4-425 Pro Intel Core N350 8 16 GB DDR5 5 GbE x 2 $799.99 The F2 in the product name means two 3.5-inch HDD bays, where F4 is four 2.5-inch bays. First impressions Like with the F8 SSD Plus packaging, the F4-425 Pro is using the upgraded box materials, which certainly look better than a plain cream colored box with TERRAMASTER stamped on the sides. The box gives off a premium feel and certainly adds a positive vibe to first impressions. In the box F4-425 Pro TNAS device Power adapter LAN cable (CAT 6) Quick guide [full online guide] Limited warranty notice Screws (for HDD bays) Stickers 2x rubber feet (spares) Design As has become kind of common with TerraMaster, certainly in the last three years, the 2025 F2- and F4-series have received a makeover that really adds to the premium feel of the NAS. Gone are the plastic shells, now replaced with an aluminum outer shell, with the front and back retaining the textured black plastic we saw on the 2024 models. Some key differences from the 2024 series include placing the power button back on the front, along with the addition of a Type A USB port. It's not much bigger or heavier either; in fact, it weighs 500 grams less than the F4-424 Pro. It's slightly shorter in height and depth (length), but only by a few millimeters. The front and back do retain a similar style to the 2024 series. On the front, you just have your four bays along with LED indicators for the HDDs and power. The welcomed change is having a USB port on the front for quick access, should you need to back up a USB drive, for example. Around the back, from top to bottom, you have a reset pin hole, an HDMI port, two 5 GbE Ethernet ports, two USB 3.2 Gen 2 (10 Gbps) Type A ports with a Type-C port below them, and a connector for the barrel port power source. Again, there's no Kensington Security Slot present, which is a bit of a shame considering it's a data storage device. Left side Right side On the left and right of the F4-425 Plus, it is completely smooth aluminum with a TERRAMASTER logo printed on both sides. On the bottom, there are some holes to assist ventilation. Unlike with the F4-425 Plus, the rubber feet did come unstuck during the teardown, which was also an issue on the 2023 series. It seems like other customers have lodged complaints about them, as TerraMaster now includes two spare rubber feet in the box, in case any of the preinstalled ones are lost; however, this seems more like a papering over the cracks solution rather than actually fixing the issue with better quality rubber stand-offs. There are also four screws that must be removed in order to access the internals. Teardown Upon removing the four screws, you can slide the device out of its shell to reveal the three NVMe M.2 slots (PCIe 3.0 X1) and single SODIMM slot connector, which is populated with a single 16GB DDR5 4800MT/s module. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $492.99 that TEAMGROUP supplied us with, along with a 250GB 970 Evo Plus that my colleague Chris White sent me by accident and let me keep a few years ago. As I have said in previous reviews, TerraMaster support staff actually encourage installing whatever you want on their devices, and happily, the USB port for the bootloader is now easily accessible should you want to use it for your own flavor of NAS OS, such as TrueNAS, Unraid, or maybe Xpenology. Yes, because TerraMaster has now switched to a 256 GB NAND Flash card (3rd photo above) for the TOS bootloader. This is also replaceable, but you can also simply add a USB bootloader, access the BIOS, and tell the F4-425 Pro to boot from that instead of the Flash card. Unlike earlier iterations of TerraMaster NAS, you don't have to tear this down any further than the four screws on the outer shell in order to be able to access and manage the memory, NVMe slots, and USB bootloader. However, if you need to access the NAND Flash card or CMOS battery, then eight more screws (four on each side) need to be removed in order to take off the rear panel with the 120mm fan, and then the motherboard can be lifted off and removed from the SATA connector PCB. There's also no risk of threading the screw holes, because the four that hold the shell in place are metal on metal, while the screws that hold the rear panel on do screw into plastic. Either way, like last time when I reviewed the F4-425 plus, I was just happier to see larger screws being used. Overall, it follows some great improvements in build quality from the 2024 series and earlier. Setup BIOS The F4-425 Pro includes an Aptio BIOS from American Megatrends [1, 2], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to the USB bootloader so this would still allow you to switch to a USB stick with an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Setup is roughly the same as the F4-425 Plus, along with the new TOS 7 setup dialogs, so there will be no surprises here. Upon connecting to the LAN and booting up, the F4-425 Pro can be reached by navigating to http://tnas.local. If that doesn't work, you can use the local address assigned via DHCP, which you can find using the TNAS PC desktop application, which is essentially a TerraMaster NAS finder. The setup process is pretty straightforward, through a wizard, and in full below: TOS 7 Initialization As you can see, TOS 7 received a new coat of paint, and the initialization requires fewer interactions. Happily, TOS no longer decides to throw all disks into the same Storage Pool; 2.5-inch HDDs are allocated into Storage Pool 1. This is because two of the HDDs are allocated to hold system files. Previously (with TOS 5 and 6), if you pre-installed HDDs and SSDs, they were all placed into Storage Pool 1, even if you did not select the SSDs for inclusion during the onboarding. TOS 7 Setup On first boot, there is a tutorial and some steps to take to harden the TNAS (or not), which includes an immediate update from TOS 7.0.0616 to 7.0.0706, of which the changelog screenshot is also included in the above gallery. It must be noted that the Security Advisor still contains (in my opinion) a pretty major bug in that if you enable SPC and then do the required rebooting, the Security Advisor still says that SPC is disabled. TerraMaster provided the following statement about it: It is disappointing that TOS 7 has been in beta since December, and this OOBE issue is still there. Shutdown option has moved Instead of a Taskbar option to manage the NAS, all of these options have been moved to a "Start panel", initially I didn't see it and my contact had to show me how to power off the F4-425 Pro. To logout, reboot or power off you can find those controls at the top right of the Panel. It is also possible to power off through the TNAS mobile app beta. Storage setup Above, you can see the steps I took to create the Storage Pools and Volumes. I made a second Storage Pool using TRAID on two 4TB MP44Q SSDs (which, in this instance, is similar to RAID 5), and finally, I added the 250GB 970 Evo Plus drive as Hyper Cache on Storage Pool 1 in Balanced mode. Registering If you decide not to lock down the F4-425 Pro in Security Isolation Mode (blocking all external connections), then you could set up a TNAS device ID through the Remote Access setting in the Control Panel (which must be unique). This works in combination with an online TerraMaster account. TOS 7 TNAS Online Creating a TerraMaster account and linking the device online activates the warranty when you provide proof of purchase and the serial number, but it also gives you access through the TNAS mobile app, which allows you to complete certain operationsб including powering off and restarting the NAS remotely. A TNAS mobile update is required to gain access through TOS 7, and this is provided on the TerraMaster website, as it is not yet on Google Play. The app is evolving all the time and has made leaps and bounds since I first started reviewing TerraMaster devices almost three years ago. It is not quite there yet if you are comparing the likes of Synology, which, sadly, a lot of users online do all the time. OpenClaw setup One of the main selling points of the new F4-425 Pro is the inclusion of OpenClaw, with TerraMaster claiming that it is "powered by the world's first AI-native TOS 7 OS, supporting local-first smart workflows and independent data control." However, I immediately ran into problems trying to enable OpenClaw. After waiting 20 minutes at the "Enabling" message of the OpenClaw app following installation, I decided to do some searching online and discovered that it couldn't complete the installation process due to SPC being enabled, which is something TOS 7 immediately recommends to be enabled on first boot. SPC for NAS (TOS 7) is basically the same principle as UAC in Windows; it blocks executables from being launched by non-Super Users. After reaching out to my contact about these issues, I received the following response: Anyway, this only became clear when I closed the OpenClaw app screen and clicked on the OpenClaw icon in the taskbar; that is when I saw the message about disabling SPC. I think, due to the fact that this is a requirement, this should be a prompt during the installation process, not when closing the App Market and then trying to launch OpenClaw. There's also no 'Getting started' guide for people like me who have never used OpenClaw. I tried to add an LLM and discovered the tutorial led nowhere. That's when I started looking around the official TerraMaster forums, and I found a guide that helpfully explains that you won't get anywhere with OpenClaw unless you have a paid plan, which is disappointing because I imagined there would be an option to use a local LLM as I do in SubtitleEdit with Whisper-XXL. In addition, with the marketing imagery on the official site, it says that the OpenClaw feature is "all processed 100% locally for absolute privacy." which led me to believe that I could install a local LLM, not one that required paid tokens. In any case, TerraMaster does not provide guidance for this new feature, which was also a selling point of the F4-425 Pro! My contact also provided clarification about the above points I raised with TerraMaster Since it is not in the scope of the review to add paid services, I'll leave that to the people who are more qualified with OpenClaw. F4-425 Pro Surveillance App TOS also comes with a Surveillance app, which is not installed by default; it can be found in the App Market recommended section. In addition, after installing, it doesn't drop a shortcut on the Desktop or top taskbar, but you can "Send to Desktop" from the App Market listing for the app for a quick way to open it. Adding my Reolink POE doorbell camera was painless. TerraMaster doesn't appear to have a repository of preconfigured cameras; instead, the camera must be added using ONVIF or RTSP. No mobile Surveillance app TerraMaster still doesn't have a dedicated Surveillance app, although from searching online, Surveillance can be used and managed through the TNAS mobile app. I tried this with the updated TNAS mobile app beta in combination with TOS 7 and got a message that Surveillance was "Only accessible through web browser," so I reckon this must be limited to the stable versions of TOS 6 and the mobile app. More quirks In addition, whenever I minimized the Live View window in the browser Surveillance app, the feed appeared to switch to the Low-bandwidth stream, and there was no way to get the High-quality stream back. To get the High-quality stream back, I had to close Live View and then reopen it. Benchmarking A pretty cool feature of the TOS 7 is that it allows you to install directly to the NVMe M.2 SSD. In order to do that, you would have to leave out any HDDs during initialization, and even then, the system partitions are always written to two HDDs when they are eventually added. With three NVMe slots, this also gives an interesting scenario where you could build a TRAID storage Pool for installing all your apps and Docker on, and keep the third for SSD cache on the HDD pool. Limitless options! SATA PCIe 3.0 X1 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 5 GbE hub was well within acceptable ranges. Although the read result on SATA was a little less than with the F4-425 Plus, for some reason, while writes were generally better. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 5GbE connection. Of course, you can also opt to bond the two 5 GbE connections for a bit more umph, but I didn't do that. TOS 7, which, as of testing, is still in Beta, comes with an App Center that has a bunch of handy programs you can install right off the bat, such as Emby, Plex, Docker, as well as in-house Backup and Surveillance solutions. As you can imagine, any media streaming services you would want to host off the F4-425 Pro will work great, thanks to the Intel Core N350 CPU and its 16 GB of DDR5 memory. Accessing from mobile is only possible if Security Isolation Mode is disabled, which can put your NAS at risk from external sources, so there was no way to access it from the TNAS Mobile app. It's also quiet. I had this sat next to my computer on my work desk for the past week, and I did wonder if the noise I was accustomed to with NAS devices would annoy me, but all I could hear was a soft whirring of the rear fan (which was a little annoying) when the disks were not actively copying or reading data. Conclusion So what have I learned? Unfortunately, this release raises a few important questions and concerns that I feel haven't been adequately addressed. What I didn't like Our variant shipped with TOS 7 beta, and it's advised not to use it in a production environment. I feel that's a bit limiting on an $800 device. The mobile app is also still in beta and does not support some of the first-party apps, like Surveillance, and it still has quite a few bugs. I am a bit confused about the OpenClaw marketing along with the F4-425 Pro. I feel like that if it's going to be a main selling point, then offer official guidance on how to get started with it. TerraMaster recommends enabling SPC, but then markets the NAS for use with OpenClaw, which requires disabling SPC to be able to use it, opening up genuine security concerns for the NAS; and that's before you get into the security concerns of OpenClaw itself. Of course, the above issues won't be a problem if you decide to install something else on it, or even go back to the stable TOS 6. I wish TerraMaster had just given TOS 7 as opt-in rather than shipping with it. TOS 7 has been available as a preview since December 2025 (so well before my last TerraMaster review), and according to a thread on Reddit where a user shared a screenshot from the TerraMaster Facebook page, it is scheduled to launch today, June 23, but there's nothing about that in the TerraMaster news blog. My contact confirmed over email that TOS 7 exits beta today. The rubber feet also deserve a mention as they continue to be a problem, with them coming unstuck the moment you shift the F4-425 Pro anywhere on your desk. What I liked What it comes down to, though, aside from what I already mentioned, you are still getting a quality, affordable device here, so recommending it will depend on the individual's use case. If you're just looking for a relatively small NAS device to manage virtual machines on, backup your files, and take care of your home theater streaming, then it is a great device that will certainly futureproof you for some time. It provides good performance, takes up little space, and is, on the whole, very quiet. Four bays afford proper redundancy using TRAID or RAID 5, and you can even expand on storage capacity by adding the 2-bay D5, or 4-bay D8 Hybrid DAS over a USB 3.2 (10Gbps) link. Considering the 2024 releases were more about power, with the likes of an Intel Core i5-1235U high-end laptop CPU under the hood, I asked my contact last time if we could expect more of the same in higher-end models and was told: It makes a lot of sense to use Intel's N350 chip inside a NAS; it is more than capable of doing what the F4-425 Pro is intended for, media streaming and backup. The only downside is still the clear lack of community and even staff support on the official forums. In the past, I have had topics go unanswered for days, or there would be generic-type "we've noted this and passed it onto our developer team" type responses. Along with the other things I mentioned, it all ends up costing it a couple of points. If you are comfortable with the command line, Docker, and setting up TrueNAS or Unraid, you'll be fine. You can do great things with this hardware. In TOS, the apps are a bit lacking, and things don't always work as expected.\ AI NAS?! What has become clear to me this year is that we are going to start seeing all kinds of "AI NAS" come to market, and while that might be good for us consumers, be diligent and research these claims. Although the F4-425 Pro technically comes with AI, it is really using a cloud service that is externally sourced off-device through the third party OpenClaw app. My colleague did review a newcomer to the NAS space earlier this year, and it includes a local AI assistant inside the Zettlab D4 NAS, and they do not even use AI in the product name, check out Chris' review here. Where to buy and a discount coupon However, it does not change the fact that this is truly a great entry-level home media-class NAS that you can buy right now. TerraMaster is having a 20% off launch discount, plus you can also still apply our unique 10% off coupon on checkout, which only works on the official website. So here is a breakdown of the pricing that is only valid on the official TerraMaster website. TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = $575.99 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = $503.99 TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = £525.59 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = £460.79 Use NEOWIN coupon code during checkout for 10% discount Over on Amazon US and UK, the F4-425 Pro also gets a 20% launch discount, but here, the above 10% coupon cannot be applied. TerraMaster F4-425 Pro (N350) for $639.99 at Amazon US (was $799.99) TerraMaster F4-425 Pro (N305) for $559.99 at Amazon US (was $699.99) TerraMaster F4-425 Pro (N350) for £583.99 at Amazon UK (was £729.99) TerraMaster F4-425 Pro (N305) for £511.99 at Amazon UK (was £639.99) As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      112
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!