Texting Driver Who Slammed Cyclist: I, Like, 'Just Don't Care'


Recommended Posts

I wrote attempted murder.

 

Using your cell-phone whilst driving is premeditated, I.M.H.O.

You're still wrong. Attempted murder has to be premeditated, whereas she had no intention of killing anyone - she just recklessly put other people's lives in danger.

I could only imagine the amount of public outrage were it to happen in this city. There's already a significant car-versus-bike mentality prevailing here.

We once had a former attorney general that was involved in a road rage incident that claimed the life of a cyclist. The cyclist was apparently overtly aggressive in this case, but regardless the former AG's reputation was and still is the subject of heated scorn especially amongst cyclists: http://www.cbc.ca/news/canada/toronto/bryant-reflects-on-life-changing-incident-in-28-seconds-1.1138955

On topic: it's a bit troubling to know that there are people on this planet that lack any empathy whatsoever.

Glad I live in a bike-friendly city :laugh:

 

Not that I don't understand the hate - especially in cities, a lot of cyclists are idiots, but some of us actually do obey traffic laws and wear helmets, and can respect the fact that we're riding next to things that could kill us and not miss a beat :p

 

Also, the girl in this story is an idiot.

 

The "hate" is because people like you are very much the exception.

What about pedestrians? When they cross the road they can cause an accident so should they all have to carry insurance too? Common sense, please.

 

Pedestrians are not on the road as a matter of course.  For someone requesting common sense, yours is seriously lacking.

Pedestrians are not on the road as a matter of course.  For someone requesting common sense, yours is seriously lacking.

Most people cross the road on a daily basis and many road accidents involve pedestrians. My statement stands.

 

I don't understand where you intolerance of cyclists comes from.

The "hate" is because people like you are very much the exception.

 

They irritate me because the majority I see here only follow traffic laws when it suits them, the instant a light turns red I see most of them pick up their bike and use the Zebra crossing to continue, some even just cycle through red lights the moment they see a gap. 

They irritate me because the majority I see here only follow traffic laws when it suits them, the instant a light turns red I see most of them pick up their bike and use the Zebra crossing to continue, some even just cycle through red lights the moment they see a gap. 

 

I don't mind those that dismount and use the crossing. It's those that just cycle through it that <bleep!> me off!

I can understand people not realising how dangerous using a mobile phone is while driving, as most of the time they'll probably be able to get away with it, 

 

(I only just seen this reply, so it might look odd on the 4th page) Ignorance, at least in Australia, isn't much of an excuse. The dangers of texting while driving have been well known here for some time. I suspect the risks are well known pretty much everywhere. It really falls under the "taking your eyes off of the road or splitting your concentration between driving and something else" is a dangerous idea.

 

Also, I'm not sure how getting away with something tells us anything about whether the person is aware it is illegal or not. Being caught doing the wrong thing isn't the only way to find out that said thing is wrong or illegal. You don't need to be caught drunk while driving to find out it is illegal to be intoxicated behind the wheel, for example.

the cyclist should sue for medical of course, and then civilly too, he has public proof and a judge would agree easily with his side.

Could take her to civil court.

 

They might do the same, the cyclist will have to front the bill, maybe the cyclist should start a thread on a ''give now'' charity site, so the funds can be sought to sue and take the berk to court.

 

I will dontate, I am sure thousands will.

Not sure if trolling, but I'll answer anyway.

 

It speaks to her complete lack of empathy or remorse for her wrong doing. That is the sign on a psychopath.

 

And considering we factor in remorse and empathy for wrongdoing during sentencing, the perpetrator's attitude is relevant. 

in all honesty was not a troll, I dont understand why people care about someone elses lack of caring? It was a genuine question maybe seemed trolly due to my swearing ... I also think its odd remorse is taken into account at trials...I dont suffer from empathy (I accidently typed suffer but I quite liked how it sounded so left it) so I guess I just dont understand it

Using your cell-phone whilst driving is premeditated, I.M.H.O.

Serious question and no offense, but do you know what premeditated means?  

"think out or plan (an action, esp. a crime) beforehand."

She did not think out or plan beforehand a murder. Therfore it cannot be premeditated murder.

 

You're still wrong. Attempted murder has to be premeditated, whereas she had no intention of killing anyone - she just recklessly put other people's lives in danger.

Exactly. Im not sure where he got that this was a premeditated murder.

the cyclist should sue for medical of course, and then civilly too, he has public proof and a judge would agree easily with his side.

 

He doesn't need to, her car insurance covers any medical bills she causes with her vehicle. 

 

I could only imagine the amount of public outrage were it to happen in this city. There's already a significant car-versus-bike mentality prevailing here.

We once had a former attorney general that was involved in a road rage incident that claimed the life of a cyclist. The cyclist was apparently overtly aggressive in this case, but regardless the former AG's reputation was and still is the subject of heated scorn especially amongst cyclists: http://www.cbc.ca/news/canada/toronto/bryant-reflects-on-life-changing-incident-in-28-seconds-1.1138955

On topic: it's a bit troubling to know that there are people on this planet that lack any empathy whatsoever.

 

I live in the Melbourne CBD, Only outrage I can see would come from cyclists. Most City drivers I'd say dislike cyclists cause majority of them are morons who think they own the road. I've seen cyclist cut off motorbikes and causing accidents, cyclists cutting through lanes to get to the front of locked up traffic and then holding back the rest of the traffic going 10km/h in a 60km/h zone and I also see cyclists go through red lights all the time.

 

I'd lack empathy also if I was being charged for something I believed I wasn't at fault for. Sure she was on her mobile but we don't know where or how she hit the cyclists, I know I would've hit a few cyclists if I wasn't paying attention to the road and braked when they decided to merge into my lane but that doesn't change the fact that it would've been their fault if I drove into them as they can't merge into a lane with traffic that need to press the brakes in order to not collide with them.

I live in the Melbourne CBD, Only outrage I can see would come from cyclists. Most City drivers I'd say dislike cyclists cause majority of them are morons who think they own the road. I've seen cyclist cut off motorbikes and causing accidents, cyclists cutting through lanes to get to the front of locked up traffic and then holding back the rest of the traffic going 10km/h in a 60km/h zone and I also see cyclists go through red lights all the time.

 

I'd lack empathy also if I was being charged for something I believed I wasn't at fault for. Sure she was on her mobile but we don't know where or how she hit the cyclists, I know I would've hit a few cyclists if I wasn't paying attention to the road and braked when they decided to merge into my lane but that doesn't change the fact that it would've been their fault if I drove into them as they can't merge into a lane with traffic that need to press the brakes in order to not collide with them.

 

I see what you're saying about the poor and dangerous behaviour exhibited from cyclists. As a casual cyclist myself, I see it too when I'm cycling and see cyclists casually run traffic lights or stop signs without a care. Some don't wear helmets either.

 

Fixing bad cyclist behaviour is tricky. Licensing or taxing bicycles? I strongly disagree. In urban centres, we should be doing more to discourage the use of private vehicles - yeah public transport is great, but getting it built is bloody expensive and surely you can't expect public transport to fill in for everyone requiring short trips to the local grocer. Taxing an otherwise inexpensive mode of transportation removes a large incentive to consider it over other options. Furthermore, for something you can easily buy off the shelf in a sports store or bike shop, and something that is used by kids to adults inclusive - how do you arbitrarily impose a cutoff age when even young children use these things? It's not like children operate mini-Smart cars or something. I just see licensing in the case of bicycles as imposing too much trouble than its worth - the amount needed for police to run around and enforce licensing, plus the bureaucracy needed for said licensing.

 

(As an aside, I'll also mention that lately, these things - e-bikes - are becoming more popular downtown. They take advantage of what the law defines as a motor vehicle - it's technically a bike as it has pedals (good luck seeing anyone use those though), and the electric motor is not permitted to exceed something like 35 km/h. Any modification to increase its speed will make the e-bike a vehicle requiring licensing in the eyes of the law. These e-bikes have actually caused tensions not with motorists, but cyclists who believe the e-bikes are simply poor men's motorcycles not requiring licensing, yet taking up more space in bike lanes due to their mini-Vespa appearance. Anyways, reason I mention this - I could see why they may someday target these e-bikes for licensing as, by their nature, they're closer to being motorbikes than traditional bicycles.)

 

The easy, but expensive fix is simple. Cities need a hell lot more bicycle infrastructure so that cyclists can ride safely in their own traffic-separated lanes, yet said lanes need to integrate with the existing road infrastructure so that they are useful, instead of being glorified recreational lanes. Don't get me wrong - recreational trails are great for relaxation! But they by far should not be the only bicycle infrastructure a city builds. Until this is possible, under our provincial legislation governing vehicles on roads (Highway Traffic Act), bicycles have the right to take up an entire lane of traffic if they wish - though in practice, most keep to the curb lane as much as possible. Personally I'm scared to hell to be as close to vehicles and always try to hug the curb lane - I try to do indirect left turns by using the pedestrian crosswalks, to avoid weaving across two lanes of traffic to reach the left turn lane. In fact, in the more suburban parts of this city - especially where I live - I'll admit that I continue to cycle on sidewalks even though my bike's tires are technically too large to be used on sidewalks. Why? Because out in the suburbs, the roads and amenities were clearly built around the car, being a post World War II development, and as such cars have free will to go 60 km/h in three lanes of traffic per direction. That's not something I would want to risk placing myself in! On the other hand, the roads in the CBD/downtown are smaller, cars travel at slower speeds due to higher traffic, and on some roads there are traffic-separated bike lanes - thus a safer environment for cyclists overall.

 

Now I acknowledge that even separated traffic lanes only solves part of the problem - it doesn't fix cyclists not giving a damn about traffic lights or stop signs. Here is where I'll agree with police occasionally doing spot checks to catch cyclists running stop signs - and they do hand out tickets. Coincidentally, one of our city councillors was caught doing just that and was handed a ticket. But again, licensing isn't needed to catch cyclists blowing stop signs, just as pedestrians aren't required to have licenses to be caught jaywalking.

 

Now regarding the empathy side. Assuming she made these comments before her judgment, regardless of whether it was her fault or the cyclist's fault this accident happened - and we know, based on the account I gave above, it can be the cyclist's fault - I and others in this thread don't believe it's simply good form for her to publicly express indifference - "I, like, just don't care" - towards a person's injuries that she may or may not have been directly responsible for. Something like "I feel bad for what that guy is going through, but at the same time, he holds responsibility for his actions that led to this, as well as the damage I now face" shows a lot more tact. And that's simply what she should publicly express - if she personally doesn't really give a flying crap about the cyclist's injuries, then we won't know and that's fair. However, seeing as she was found guilty and police had evidence of her exhibiting poor behaviour, it reeks of more intolerance and selfishness on her part.

The police down under don't really seem to try hard to deter mobile use while in cars. Added to the general apathy of the younger australians these days, and it's a recipe for disaster

 

They don't seem to try at all! :/ I think part of the problem is the people who have the "it couldn't happen to me" syndrome.  You know that old chestnut, "I've been doing it for X years and never had an accident, why should I change now?" they never consider the accidents they CAUSED by people trying to avoid their careless driving nor the bad example they leave young drivers. I often travel by bus because traffic is pretty bad where I live and the things I see other drivers doing is horrifying. The usual culprits are holding the phone to their ear with one hand while driving with the other hand. One time saw a woman driving with her knees while BOTH hands were on her phone texting in her lap with her eyes on the phone...how she didn't have an accident is beyond me. Then a few years back there was that idiot who put his car in cruise control and stuck his feet out the window while on the freeway  :|, yet the police will nail you for going a few km/hr over the speed limit but let these other dangerous drivers go (to be fair the cops did nab him and it was all over the news). Seems they are more interesting in getting easy money then actually going after the real problem drivers  :huh:  :/

 

To the topic at hand, personally I feel cyclist shouldn't be allowed on the road during peak hours. Even when the cyclist is doing the right thing it still causes issues and disruptions to the traffic. Apart from the obvious that they cannot keep up with the traffic, the rules that are in place to protect them also create issues for other road users. They essentially become a rolling road block and on a busy main road this is the last thing you want. When I occasionally drive to work, quite often dual lane roads are essentially reduced to single lane due to cyclists and is really slows the traffic down and on single lane roads it can bring things to a standstill. During the day when the traffic is lighter, I am more tolerant of them as it's easy enough to safely pass them. I also cycle occasionally too but I refuse point blank to ride on the road, I will always use bike paths or sidewalks where applicable because I know how dangerous and disruptive riding on the road can be.

  • Like 2

I see what you're saying about the poor and dangerous behaviour exhibited from cyclists. As a casual cyclist myself, I see it too when I'm cycling and see cyclists casually run traffic lights or stop signs without a care. Some don't wear helmets either.

 

Fixing bad cyclist behaviour is tricky. Licensing or taxing bicycles? I strongly disagree. In urban centres, we should be doing more to discourage the use of private vehicles, and taxing an otherwise inexpensive mode of transportation removes a large incentive to consider it over other options. Furthermore, for something you can easily buy off the shelf in a sports store or bike shop, and something that is used by kids to adults inclusive - how do you arbitrarily impose a cutoff age when even young children use these things? It's not like children operate mini-Smart cars or something. I just see licensing in the case of bicycles as imposing too much trouble than its worth - the amount needed for police to run around and enforce licensing, plus the bureaucracy needed for said licensing.

 

The easy, but expensive fix is simple. Cities need a hell lot more bicycle infrastructure so that cyclists can ride safely in their own traffic-separated lanes, yet said lanes need to integrate with the existing road infrastructure so that they are useful, instead of being glorified recreational lanes. Don't get me wrong - recreational trails are great for relaxation! But they by far should not be the only bicycle infrastructure a city builds. Until this is possible, under our provincial legislation governing vehicles on roads (Highway Traffic Act), bicycles have the right to take up an entire lane of traffic if they wish - though in practice, most keep to the curb lane as much as possible. Personally I'm scared to hell to be as close to vehicles and always try to hug the curb lane - I try to do indirect left turns by using the pedestrian crosswalks, to avoid weaving across two lanes of traffic to reach the left turn lane.

 

Now I acknowledge that even separated traffic lanes only solves part of the problem - it doesn't fix cyclists not giving a damn about traffic lights or stop signs. Here is where I'll agree with police occasionally doing spot checks to catch cyclists running stop signs - and they do hand out tickets. Coincidentally, one of our city councillors was caught doing just that and was handed a ticket. But again, licensing isn't needed to catch cyclists blowing stop signs, just as pedestrians aren't required to have licenses to be caught jaywalking.

 

Now regarding the empathy side. Assuming she made these comments before her judgment, regardless of whether it was her fault or the cyclist's fault this accident happened - and we know, based on the account I gave above, it can be the cyclist's fault - I and others in this thread don't believe it's simply good form for her to publicly express indifference - "I, like, just don't care" - towards a person's injuries that she may or may not have been directly responsible for. Something like "I feel bad for what that guy is going through, but at the same time, he holds responsibility for his actions that led to this, as well as the damage I now face" shows a lot more tact. And that's simply what she should publicly express - if she personally doesn't really give a flying crap about the cyclist's injuries, then we won't know and that's fair. However, seeing as she was found guilty and police had evidence of her exhibiting poor behaviour, it reeks of more intolerance and selfishness on her part.

 

I don't believe cyclists should pay road taxes, for children riding bikes they should stick to footpaths, parks and recreation areas which allow bike riding. In Melbourne CBD we have bike paths that cyclists must use, these bike paths are usually a lined section on the side of the road or pedestrian pathways and if a road has these pathways cyclists aren't legally allowed to be on the road with cars.

 

But with these bike paths they are usually in between parking and traffic lines:

 

art_w_lanes_1005-420x0.jpg

 

So when a car indicates left to park into a parking zone by law the cyclist is supposed to stop for the left turning vehicle, this never happens though they usually try to squeeze through or merge into the right to bypass the vehicle while going into a lane with traffic.

 

Here is an image of cyclists moving into car lanes when there is a dedicated bike lane:

 

423954-kent-st.jpg

 

From VicRoads (Melbourne's Road Rules & licencing body)

 

 

Left turning vehicle

Rule: A bike rider must not ride on the left side of a vehicle that is indicating left and turning at an intersection.

Tip: Stay in the traffic lane behind the turning vehicle. 

 

I've been driving on the road for years and I don't think I've once had a cyclist slow down or stop in the bike lane so I could turn left when the bike lane overlaps a turning lane. 

 

I don't think most cyclist even know these road rules and should acquire a license before they are allowed to use the roads, everyone else needs to do tests and get a license to do so.

 

I also agree with Xerxes that cyclist should not be allowed to use the roads during peak traffic times as it severely impacts traffic and traffic is terrible in Melbourne during peak hours.

I don't believe cyclists should pay road taxes, for children riding bikes they should stick to footpaths, parks and recreation areas which allow bike riding. In Melbourne CBD we have bike paths that cyclists must use, these bike paths are usually a lined section on the side of the road or pedestrian pathways and if a road has these pathways cyclists aren't legally allowed to be on the road with cars.

 

But with these bike paths they are usually in between parking and traffic lines:

 

art_w_lanes_1005-420x0.jpg

 

So when a car indicates left to park into a parking zone by law the cyclist is supposed to stop for the left turning vehicle, this never happens though they usually try to squeeze through or merge into the right to bypass the vehicle while going into a lane with traffic.

 

Here is an image of cyclists moving into car lanes when there is a dedicated bike lane:

 

423954-kent-st.jpg

 

From VicRoads (Melbourne's Road Rules & licencing body)

 

I've been driving on the road for years and I don't think I've once had a cyclist slow down or stop in the bike lane so I could turn left when the bike lane overlaps a turning lane. 

 

I don't think most cyclist even know these road rules and should acquire a license before they are allowed to use the roads, everyone else needs to do tests and get a license to do so.

 

I also agree with Xerxes that cyclist should not be allowed to use the roads during peak traffic times as it severely impacts traffic and traffic is terrible in Melbourne during peak hours.

Cyclists can be complete arses.

 

Where I live they cycle on the pavements, go around bends on the inside rather than wide so they can see if people are coming.

 

We also have cycle lanes with cars always parked in them.

 

From those images, the Police need to deal with the cyclists not using cycle lanes and pedestrians walking in cycle lanes.

Most people cross the road on a daily basis and many road accidents involve pedestrians. My statement stands.

 

I don't understand where you intolerance of cyclists comes from.

 

When you get ?2000 worth of damage done to your car thanks to an accident caused by a jerkoff cyclist ignoring the rules and then scarpering after realising they caused an accident, then you'll understand.

in all honesty was not a troll, I dont understand why people care about someone elses lack of caring? It was a genuine question maybe seemed trolly due to my swearing ... I also think its odd remorse is taken into account at trials...I dont suffer from empathy (I accidently typed suffer but I quite liked how it sounded so left it) so I guess I just dont understand it

 

 

Just so we're clear, if you do something wrong, especially if it causes harm to another person, you feel no sense of remorse or guilt? I'm fairly certain that is a sign of being a psychopath. That's not necessarily an insult. Not all psychopaths are murderers. Apparently 1 in 100 people are classed as psychopaths.

Just so we're clear, if you do something wrong, especially if it causes harm to another person, you feel no sense of remorse or guilt? I'm fairly certain that is a sign of being a psychopath. That's not necessarily an insult. Not all psychopaths are murderers. Apparently 1 in 100 people are classed as psychopaths.

No any sadness or fear i feel is only about how it might affect me. im autistic (sometimes mild autism is mistaken for psychopathy) 

No any sadness or fear i feel is only about how it might affect me. im autistic (sometimes mild autism is mistaken for psychopathy) 

 

Emotionally you might not be able to grasp the concepts (I quite understand that you don't, my son is the same as well with mild aspergers), but intellectually you should be able to grasp it. You just have to apply empathy through intellectual processes instead of automatic emotional ones.

Emotionally you might not be able to grasp the concepts (I quite understand that you don't, my son is the same as well with mild aspergers), but intellectually you should be able to grasp it. You just have to apply empathy through intellectual processes instead of automatic emotional ones.

This is true, but empathy is emotion, logically I dont see a problem with it either if it doesnt affect you, why is it your problem? dont get me wrong I have morals on what I beleive is right and i can have logical arguments/debates which may even change my view... but in all honesty I dont see the concept of why people would care about this situation... I believe I am still thinking about this emotionally, logically i can see people are annoyed with her lack of caring about a human life and her general arrogance regarding the situation but I can not imagine this feeling for this situation :/ its difficult to explain gah lol

the cyclist should sue for medical of course, and then civilly too, he has public proof and a judge would agree easily with his side.

 

the cyclist should sue for medical of course, and then civilly too, he has public proof and a judge would agree easily with his side.

 

Australia has a decent health system, so the only bill he should get is if he elected to go into a private hospital with an excess charge (No more than $1000).  If he's gone public, it's covered by our Government.

There are also insurances over here when registering a car that protect the costs of anyone you hit, so it's covered too.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • These are not "great" prices... just "less awful". Apparently "Those who forget the past are doomed to pay higher prices and think they've won."
    • Russia was able to invade Crimea because of those people. But my point is that I've personally heard how great it was to be "back in Russia" right afterwards - look how great it is now. I've asked you a question in another comment which you haven't answered, so I'll ask it again: is it better now without "Europrats"?
    • ZimaBoard 2 1664 Starter Kit review: it's a cool and affordable DIY NAS by Steven Parker IceWhale Technology reached out to me asking if I was interested in testing the ZimaBoard 2, and after convincing them to send me the Starter Kit, it arrived at my doorstep in May. A bit of background: it is a Shanghai-based Chinese company founded in 2020, which specializes in single-board servers and personal cloud solutions. From searching around online, user feedback on the company and ZimaOS is mostly positive, so we're off to a good start. In addition, I should probably point out that although they do not have a large portfolio of NAS devices, with just four of what they do offer, they seem to have covered everything from a relatively low-priced entry point with the ZimaBoard 2, right up to the high end, with the ZimaCube 2 Creator Pack that even includes an NVIDIA RTX PRO 2000. Anyway, as already mentioned, what we have today is the ZimaBoard 2 Starter Kit, and here are the full specifications: ZimaBoard 2 Model 832, 1664 CPU Intel Core N150 (4x E Cores/Threads, Max burst up to 3.6 GHz) TDP: 6W (Base) 10W (Max) Graphics Intel UHD Graphics 24 EUs (1.00 GHz) Memory 8 GB, 16 GB DDR5 4800MT/s non ECC SODIMM (soldered) Disk Capacity 60 TB (30 TB x 2) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Storage 2 x SATA 3.0 6Gb/s Ports with Power Bootloader 32 GB, 64 GB eMMC Network 2x RJ-45 2.5 GbE PCIe 1 x PCIe 3.0 (via LPC) USB Ports 2 x USB-A 3.1 (5 Gbps) Display Mini-DisplayPort 1.4 (4K@60Hz) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Virtualization Intel® AES New Instructions Intel® Virtualization Technology (VT-x) Intel® Virtualization Technology for Directed I/O (VT-d) Size (H/W/D) 140mm x 83mm x 31mm Weight 0.4 kg (only ZimaBoard 2 device) Power 12v 5A Power Supply Warranty 1 year (Global) 2 Years (EU) OS ZimaOS v1.6.1 MSRP $339, $399 ($548.60) As you can see above, there are two variants of the ZimaBoard 2. The lesser variant has half the eMMC storage and 8 GB less RAM, although it also costs $60 less than the top variant we are testing today. The above pricing is only for the ZimaBoard 2. I put the MSRP of the Starter Kit next to it in brackets, although as of publishing, it is discounted to $534.50. The ZimaBoard 2 started life on Kickstarter and shipped to backers in August last year. It became available via the official website in late 2025 and Q1 2026. This hobbyist NAS contains the still relatively new N150 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, although in this case, the memory is integrated into the board itself, so it will not be possible to upgrade or expand the amount. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Twin Lake series that sits near the bottom of the N-series, designed for low- powered systems and entry-level laptops, and as such has a base level TDP of just 6W. As I have noted before, we are seeing another NAS with a great amount of RAM. It's important to mention that the ZimaBoard 2's memory is integrated into the base board (which is why they have two variants of it). As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. First impressions The Starter Kit came in one outer box with several packages inside it (shown above). I forgot to take pics of it because when it arrived, it wasn't clear what was inside, and I had to confirm with my contact that I received the entire Starter Kit. In the box ZimaBoard 2 ZimaBoard 2 HDD Expansion Bracket + PCIe card frame Zimaboard Mini DisplayPort Male to HDMI Female Cable 4K 60Hz Zimaboard PCIe 3.0 x4 to Dual NVMe M.2 SSD Adapter Card Quick guide [full online guide] Limited warranty notice Screws Design Where to start? You'd be forgiven for mistaking it as an SSD enclosure if not for all the ports on it. It is completely made out of metal, and the top is an entire heatsink. It has a premium feel about it, but it definitely looks like a hobby device. As you will see, the completed build looks like it belongs in a server or meter closet rather than as a showpiece on someone's desk. On what I am calling the rear, there's a Mini DisplayPort (1.4), two 2.5 GbE ports, with Type A 3.1 USB ports, and then the barrel connector port. Around the front, there are two SATA6 ports with a power connector in the middle. Left side Right side One side is completely free of ports. On the other there's a slit that allows for the feed of a CPU fan cable, and a PCIe 3.0 X4 slot. Top Bottom The top is entirely made up of a heatsink except for the extended height for the I/O on the rear. Around the other side, you can find the ZIMA branding and some regulatory information stamped near the bottom. As you may see from the bottom of the ZimaBoard 2, it scratches quite easily from just moving it around on my Ikea island. Teardown Before we get started, let's have a look at this thing on the inside. The steps to get to the board are as follows: Remove the four smaller Torx screws on the bottom of the ZimaBoard 2; Remove the four larger Torx screws on the sides of the device; Carefully unstick the CMOS battery from the PCB; Remove two Phillips screws on the PCB; Lift out the PCB. Yes, as you can tell from the instructions, you need three different tools to remove Torx and Phillips screws (10 in total), and unhelpfully, one of the screws is located under the CMOS battery, which is stuck onto the PCB. Building Now comes the fun part. Because the ZimaSpace website does not provide any guidance on how to put the Starter Kit together. They only have guidance for connecting the CPU fan. However, they did upload a video to their YouTube channel that shows the entire process. To install the fan, first remove the four screws on the bottom of the ZimaBoard 2, then on the inside, there is a CPU FAN connector where you can attach the fan, reattach the ZimaBoard 2 frame, and feed the fan cable through the provided slit. Then remove the nearest screw on the side and attach the fan frame to the side of the device using the same screw. ZimaBard 2 screws Aligning the screws Bottom view Remember those four screws we removed to access the CPU FAN? Longer screws are provided in the box with the HDD Expansion Bracket, which is what you will now need to attach the ZimaBoard 2 to it. Helpfully, the orientation on how to attach it is made obvious when the frame can only be screwed on at the same overall length as the ZimaBoard 2. If you do it the wrong way around (which is what I did initially) one side hangs off the frame, and it becomes difficult to attach the PCIe Adapter Card cable. PCIe card frame Other side PCIe slot connector Next, it's time to attach the PCIe card frame, which is fastened with the help of 3.5-inch SATA HDD (3 screws). These are toolless screws that you can just use your fingers to fasten them with. Then it is time to connect the provided PCIe cable with the slot connector on one side of the ZimaBoard 2, feed it through the bottom of the HDD frame, and fasten it with two standoffs. Both bracket options 2280 standoffs with 2x 4TB MP44Q The PCIe 3.0 X4 card comes with a short bracket option, handy if you decide to place it inside a different NAS or rack server, but here we need the long bracket. Oddly enough, the M.2 standoffs were preinstalled into the 22110 position, but extra standoffs are included in the box, which I installed at the 2280 position for our use. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $478.99 (the lowest price for 3 months) that TEAMGROUP supplied us with Then we have the almost completed build, you just need to push the card into the PCIe slot. Unfortunately, IceWhale Technologies did not provide a screw for the PCIe card frame (this is also apparent in their own video). Here it is at several different angles, with the last pic showing the SATA Y-Cable connected to the two WD Red Plus 4TB drives. Setup and Usage Next, you connect your cables to the I/O, and the ZimaBoard 2 powers on automatically, as there is no power button on the device. Power is controlled through the Settings in ZimaOS. BIOS The ZimaBoard 2 includes an Aptio BIOS from American Megatrends [1, 2, 3], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to a SATA/USB bootloader so this would still allow you to switch to an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Upon connecting to the LAN and booting up, the ZimaBoard 2 can be reached by navigating to the IP address (shown if you have a monitor connected), or you can find it using the ZIMA Client desktop application, which is essentially a Zima device finder. Initializing the ZimaBoard 2 The ZimaOS setup process is pretty straightforward, through a wizard, and in full above, it basically consists of setting up an account and some handy tips, and that's that! Post Setup (ZimaOS update) Upon first boot, you are alerted that there is a ZimaOS update from 1.5.0 to 1.6.1, which I applied; the full process is shown above with the changelog. ZimaBoard 2 Storage Setup Next, it is time to set up the storage. ZimaOS actually throws everything onto the eMMC flash drive; it is also the default location of AppData, which is definitely something to be wary about, as the 45GB available storage could fill up quickly. HDDs I first attempted to create a Storage Pool using the two 4TB WD Red Plus NAS drives, and got an error message: After several attempts and then looking online, I discovered it was a bug with ZimaOS where the fix was simply to reboot ZimaOS and then try again, this time I was able to create a RAID mirror using the two drives. SSDs I did the same for the SSDs, as you will see in the above gallery, when I created the second Storage Pool, it only allowed me to select available drives. ZimaBoard 2 AppData ZimaOS comes with an App Store that includes a repository of almost 400 apps, so you will be able to find most of what you'll need for a NAS (although after a quick search, I wasn't able to find a Surveillance Manager), and now comes the important part: moving the default AppData location off the 45GB eMMC and onto a larger volume: Open Settings Then Apps Then, in the Select a new location field, click on the new Storage volume you want to move it to (in my case, the Apps Storage Pool), which is the SSD RAID mirror. Confirm the Migration warning Be praised! You can also do this for Docker (which by default installs onto the 45GB eMMC flash drive) and the User database. Plex Setup Next, I tested the configuration by installing the Plex Server app from the App Store. The library folders must already exist (which I placed into the Storage Pool). Plex Server setup is straightforward and requires very little configuration. In my case, all I had to do was add the media path I just created, which you can also browse to using the folder icon in the path field. In addition, you can now map the new Media library in Windows Explorer using the Zima Client. Oddly enough, it is not possible to access the ZimaBoard 2 over the Network Neighborhood; you must map drives using the client, which is shown in the last image in the above gallery. I watched one of my Blu-Ray rips, which is Dolby Vision with Dolby Atmos, and the content played fine with no stuttering or buffering, which is what anyone needs in this scenario. ZimaBoard 2 Zima Client mobile app There's also a client for mobile. It is pretty barebones, as shown in the above gallery, for example, the Apps screen launches the WebUI for that app, and the Backup must be done manually. On opening Backup, you can select internal storage folders on your phone to backup to the ZimaBoard 2's storage, and although this is constantly scanned, the backup action itself must be manually triggered. There is an option to allow foreground backup (last image in the above gallery), but this basically means the queued backup gets triggered when you manually open the app. Benchmarking SATA PCIe 3.0 X4 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 2.5 GbE was well within acceptable ranges. Writes were generally better on the SSD RAID mirror. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 2.5GbE connection. Of course, you can also opt to bond the two 2.5 GbE connections for a bit more umph, but I didn't do that. Thermals Top PCIe card SATA HDDs Next, I measured some hotspots while playing content on Plex. It's fair to say this will perform better than a NAS that is enclosed in a metal or plastic case, as almost everything storage-wise is exposed! Anyway, the ZimaBoard 2 did not break a sweat with Plex streaming or disk benchmarks. ZimaOS Factory Reset ZimaOS does not include a factory reset option. Instead, you have to download the ZimaOS image and flash it to the eMMC manually. The flashing process is shown in the above gallery. The steps to do so are listed below: Download the ZimaOS image here; Open BalenaEtcher (Run as Administrator) and select the image; Select your inserted USB drive (min 8 GB) Flash to it; Connect your USB drive, monitor, keyboard, USB hub (optional), mouse (optional), and network cable (recommended) to the ZimaBoard 2; Connect power and press F11 continuously; Select your USB drive starting with UEFI in the boot device menu; Press Enter on the Install ZimaOS option; Select /dev/mmcblk0 (MMC) flash drive as target; Confirm with (three times) to wipe the target disk; Wait a couple of minutes while ZimaOS installs; Remove the USB drive and confirm with a reboot; Your ZimaBoard 2 has been factory reset. However, you don't have to stick with ZimaOS, in fact the company also offers official CasaOS images, that are based on Debian; or as they say themselves, put anything you want on this "hackable single board server" it's up to you. Conclusion I had a lot of fun putting this together. I've custom-built all my own PCs and servers since the 90s, and this is the first time I have had to put a NAS together. Even if the actual base ZimaBoard 2 was already a completed build, it still feels pretty custom. I just wish that IceWhale Technology included a getting-started guide in the box for the Start Kit, which would have really completed this kit. Instead, I had to search for the official video on the YouTube channel to make sure I wasn't doing anything wrong. So who is this for? Definitely the hobbyist who is comfortable building their own PC and servers. It also has a much smaller footprint than its nearest equivalent (in terms of specs), like the Beelink Me Pro, which is another NAS I will be testing soon. Although the Beelink does not come with the PCIe 3.0 X4 expansion, the ZimaBoard 2 Starter Kit suddenly looks to be a great bargain, even if it only offers the two 3.5-inch bays over the four in the other example. It makes a lot of sense to use Intel's N150 chip inside a NAS; it is more than capable of doing what the ZimaBoard 2 is intended for, media streaming and backup. It also looks like the IceWhale Technology staff are quite active in the official forums helping people with issues they come across with ZimaOS and the devices, peer support seems to be good as well, I was quickly able to find why I was not able to create a new Storage Pool in ZimaOS v1.6.1 even though that is quite a serious bug, hopefully it will be fixed in the next update. If you are comfortable with the command line and Docker, you'll be fine. You can do great things with this hardware. This was my first time with ZimaOS. It seems a bit barebones in comparison to the likes of Synology DSM, TOS, and UGOS, but it has a ton of apps to get you started with your home or small business NAS. Where to buy As of publishing, IceWhale Technology is running a discount of up to 5% for the Starter Kit. If you opt to get just the ZimaBoard 2 itself, it does come with a SATA Y-Cable, so you will be able to connect up to two 3.5-inch HDDs to it. ZimaBoard 2 1668 Starter Kit for $534.50 on Amazon US (was $548.60) ZimaBoard 2 832 Starter Kit for $372.88 on Amazon US (was $390.60) Zimaboard 2 1668 (16GB+64GB) for $419.90 on Amazon US Zimaboard 2 832 (8GB+32GB) for $359.90 on Amazon Disclosure: IceWhale Technology provided a free sample without any editorial input or review pre-approval. Good to know The Amazon link is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • It's in the Insider's group so yes it's technically beta, though these days it's hard to see much of a difference unless you opt for the most extreme beta builds, which I don't. When I moved here from the Release Preview channel I did so primarily because I wanted to see how well the restored taskbar functionality (restored from Win10, and earlier) is working and whether it was time to finally abandon SAB--and it is--working fine, so far. Not as polished as SAB, but it'll do for me.
    • I've been using MWB Premium for a number of years so that along with Windows updates and updated browser should be fine. Thanks for that.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!