Recommended Posts

Title says it all. What's going on:

1) Red light is blinking

2) Fastboot works

3) Recovery doesn't work. When I'm on fastboot and choose recovery, it will display the "Google" logo for 1-2 sec and shut down.

4) I used the Nexus toolkit to install a Google Factory image, but it still wouldn't boot.

5) I tried the Vol. UP + Power button in order to simulate a battery pull, but it didn't work as well.

6) NO, I don't have a T5 screwdriver so if this is your answer, it doesn't help me at all.

7) It needs to be constantly connected to either USB or charger in order to perform anything. My phone is in a comma. :p


I tried this: http://forum.xda-developers. com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060 but it didn't help


I get the battery icon by:
1) Going into fastboot
2) Selecting "Power off" option
3) Unplugging the USB cable
4) Plugging in the USB cable.

It's not animating. It just shows the full battery icon with a thunder in the middle for 1-2 seconds. Then red light blinking again. Some users with the red light have battery animation.

This is what gets displayed with the above procedure.

54ao1w.jpg

It has happened to me in the past, 2 times, and both times I could boot into Recovery. My brother fixed it, but now I'm not in my hometown, so I must get help online. :( Can anyone help me?

It is extremely unlikely switching to ART caused your phone to brick.

 

Instead of using a toolkit, have you tried doing everything manually to relock the phone and return to stock via adb? http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312

It is extremely unlikely switching to ART caused your phone to brick.

 

Instead of using a toolkit, have you tried doing everything manually to relock the phone and return to stock via adb? http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312

 

Actually ART is the real culprit here. The 3 times that has happened, where when I switched from Dalvik to ART. Also, I have tried what you said. Flashed stock google image, locked my phone etc etc. Nothing worked.

 

Also, adb doesn't work because I cannot access Recovery. I can only access bootloader, thus only fastboot works. :(

there is no way ART caused your phone to brick, im telling you this is a fact. The worst that can happen is a bootloop but i wont argue with you.

 

 

ADB works in Fastboot/Bootloader, that is how you factory restore not adb in recovery. Which means you havent tried it yet, give it a shot.

Did you bother trying to manually restore everything via fastboot and adb? it is almost *impossible* to brick a nexus device follow the thread i gave you and report back. Notice none of the directions mention entering recovery, so you should be able to save it if you would just listen.

 

 

1) Make sure your computer recognizes your device by typing: fastboot devices
2) Unlock your bootloader (if you have not already done so): fastboot oem unlock
3) You will see a prompt on your device. This will wipe your entire device (including the /sdcard folder). Accept. Note: you use the volume keys to change the option and the power button to accept. You cannot use the touch screen.
4) Reboot by typing: fastboot reboot-bootloader
5) Flash the bootloader: fastboot flash bootloader bootloader-mako-makoz10o.img (or whatever the name of the bootloader image that you downloaded).
6) Reboot: fastboot reboot-bootloader
7) Flash the radio: fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.48.img (or whatever the name is of the radio image that you downloaded).
8) Reboot: fastboot reboot-bootloader
9) Flash the system partition: fastboot flash system system.img
10) Optional, but read note. Flash the data partition: fastboot flash userdata userdata.img Note: this command will wipe your device (including /sdcard), EVEN if your bootloader is already unlocked. See note 2 below.
11) Flash the kernel/ramdisk: fastboot flash boot boot.img
12) Flash the recovery partition: fastboot flash recovery recovery.img
13) Erase the cache partition: either a) fastboot erase cache OR b) fastboot format cache <<== the second option seems to work better for most people. Thanks joostburg.
14) Reboot: fastboot reboot
15) Done! The first boot will likely take quite a bit longer than you are used to, as Android builds the Dalvik cache.

Now you have a fully stock image on your device. The only thing that is different from out-of-the-box condition is that your bootloader is unlocked. See the notes section at the end of this post for information on re-locking the bootloader.

Note that some users indicate that they can't get past the X on boot. If this happens to you, reboot into the bootloader and select recovery. Then, when you see the Android with the red exclamation mark, hold power and press volume up to take you to the menu. Wipe cache. If that still doesn't work, boot back into recovery and do a factory reset (this will obviously delete all your data & files in /sdcard...).

Did you bother trying to manually restore everything via fastboot and adb? it is almost *impossible* to brick a nexus device follow the thread i gave you and report back. Notice none of the directions mention entering recovery, so you should be able to save it if you would just listen.

 

I know the thread and my search led me there. But it doesn't work. :) On top of that, when I type "fastboot reboot fastboot" it will try to reboot and shut down instead.

 

Maybe the battery is the culprit, and, I believe, this thread is more relevant: http://forum.xda-developers.com/nexus-4/general/final-fix-nexus-4-red-light-death-t2250454 My brother managed to fix it 2 times, but we could boot to recovery. What's more, when we flashed stock ROM the first 2 times that happened, it would boot afterwards. Now it doesn't.

Sometimes even if you flash back to a stock rom you still have to do a data wipe, did you do that after installing the stock rom?

Switching to ART really shouldn't brick your device, it might be faulty.

7) It needs to be constantly connected to either USB or charger in order to perform anything. My phone is in a comma. :p

 

That's a small space for your phone to be in. :P

 

But it sounds like it's a power issue - if you have to keep it connected to do anything, the battery is probably faulty... (Hence why trying anything shuts the device down - no power)

the nexus 4 is a great phone. curious as to what you want it to do that it doesn't/can't do out-of-the-box?

 

Indeed it's a great phone, but I never said I wanted it to do something it cannot do. :P

 

 

Sometimes even if you flash back to a stock rom you still have to do a data wipe, did you do that after installing the stock rom?

Switching to ART really shouldn't brick your device, it might be faulty.

 

 

Yeah I did that as well.

 

That's a small space for your phone to be in. :p

 

But it sounds like it's a power issue - if you have to keep it connected to do anything, the battery is probably faulty... (Hence why trying anything shuts the device down - no power)

 

You didn't understand me. :P NOW it needs to be connected to do anything(the only thing it can do atm is boot into fastboot). Thing is, it happened 2 times the last month. :(

You didn't understand me. :p NOW it needs to be connected to do anything(the only thing it can do atm is boot into fastboot). Thing is, it happened 2 times the last month. :(

True, I didn't get that - but now I do.

 

If it happened last month, I'm still suspect of the battery (or the phone in general)... Not having a T5 driver to open it makes it tricky though. (I'd suggest eBay for one...)

True, I didn't get that - but now I do.

 

If it happened last month, I'm still suspect of the battery (or the phone in general)... Not having a T5 driver to open it makes it tricky though. (I'd suggest eBay for one...)

 

I'm Greek, so I don't have the time to wait for the ebay package to arrive. :p I will wait will Monday when the stores will be open. I tried ordering one as well(it cost 0,75 euro) and the final price was 7 euro.... That's why I will wait. :p

 

Thing is, my brother, as I said, managed to fix it both times it happened last month.

This topic is now closed to further replies.
  • Posts

    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • https://www.tenforums.com/tuto...b-results-windows-10-a.html Check the comment dates. Some of them are as old as 2016.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      478
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!