Recommended Posts

Can someone with a receiver check to see if they enabled pass through mode?  I swore the other day I got home from work and my receiver was off but my TV was still getting the signal from the xbox (im at work and forgot to try it again before I left)

I'm a DISH customer, and I always use the TV app to watch TV and guide.  Would I get any benefit out of the Oneguide on Xbox One?  Does anyone use Dish or DirectTV, and use the oneguide instead?  What are your thoughts?

The only thing I found very useful was the ease of setting up favorite channels, I only watch a handful of channels to its nice to show favorites only and browse that way.  I had a similar feature with Fios and cablevision but this was very easy to do.

I have same number  as yours but not sure what your number in the brackets after that your mentioned number.

 

The warning is still up there.

 

Crap, forgot that :blushing: ...does it matter? Will post it later...it does say something about XB and FR, though i don't use French if that's what it stands for. Will post it later for your reference. I have the Xbox logo where the Kinect alert was, maybe it has to do with the fact that mine was already dead when the update arrived? So when the OS rebooted and the firmware updated it didn't even look for a Kinect. Yours i'm assuming you plug and unplug at will, it still works?

Crap, forgot that :blushing: ...does it matter? Will post it later...it does say something about XB and FR, though i don't use French if that's what it stands for. Will post it later for your reference. I have the Xbox logo where the Kinect alert was, maybe it has to do with the fact that mine was already dead when the update arrived? So when the OS rebooted and the firmware updated it didn't even look for a Kinect. Yours i'm assuming you plug and unplug at will, it still works?

 

About the Fre part: Read the info here.

 

The number in the brackets is the date that they release the update/build.

 

The kinect is still plugged in my Xbox. If I unplug it, the warning notification shows on the screen where the Xbox Logo is at. That I don't like it, I want that off. And I want the kinect stay unplugged but I can't because the notification still shows up there.

 

I wish MS to hurry up and release the update for the 'Unplugged kinect' notification removal.

About the Fre part: Read the info here.

 

The number in the brackets is the date that they release the update/build.

 

The kinect is still plugged in my Xbox. If I unplug it, the warning notification shows on the screen where the Xbox Logo is at. That I don't like it, I want that off. And I want the kinect stay unplugged but I can't because the notification still shows up there.

 

I wish MS to hurry up and release the update for the 'Unplugged kinect' notification removal.

 

Thanks for the info, good to know it means free/bundled and not French :rofl:

Will post the bracketed numbers later, though i suspect ours are the same. My hunch tells me it's due to the state of our Kinects...maybe it's a glitch? It's annoying to have that alert on the screen, i know how you feel, but they did patch it. Possibly only for people that didn't have their Kinects active at the time of the update :s

Same.

 

Thanks.

 

Hopefully the next update will fix it.. Who knows.

 

Sure thing, and figured it would be the same. I'm telling you it's because my Kinect was already inactive at the time of the update, so somehow the firmware considers my console a bare version, with no bundled Kinect. Your sensor was active at the time of the update. This is the only explanation i can think of that makes sense to me, as the build is the same going on the numbers.

MS posted a little preview of what is coming for the July update:

http://news.xbox.com/2014/06/xbox-one-july-update-preview

Definitely more cool features coming next month. Its also the start of seeing features that had required voice commands now getting controller shortcuts (i.e. being able to snap the 'snap center' simply by double tapping the xbox logo)

  • Like 1

Sure thing, and figured it would be the same. I'm telling you it's because my Kinect was already inactive at the time of the update, so somehow the firmware considers my console a bare version, with no bundled Kinect. Your sensor was active at the time of the update. This is the only explanation i can think of that makes sense to me, as the build is the same going on the numbers.

 

I let you know.. it has been removed.  :D

  • Like 1
This topic is now closed to further replies.
  • Posts

    • Pale Moon 34.3.1 by Razvan Serea Pale Moon is an Open Source, Goanna-based web browser available for Microsoft Windows, Linux and Android, focusing on efficiency and ease of use. Make sure to get the most out of your browser! Pale Moon offers you a browsing experience in a browser completely built from its own, independently developed source that has been forked off from Firefox/Mozilla code, with carefully selected features and optimizations to improve the browsers speed, resource use, stability and user experience, while offering full customization and a growing collection of extensions and themes to make the browser truly your own. Features: Optimized for modern processors Based on proprietary optimized layout engine (Goanna) Safe: forked from mature Mozilla code and regularly updated Secure: Additional security features and security-aware development Supported by our user community, and fully non-profit Familiar, efficient, fully customizable interface Support for full themes: total freedom over any elements design Support for easily-created lightweight themes (skins) Smooth and speedy page drawing and script processing Increased stability: experience fewer browser crashes Support for many Firefox extensions Support for a growing number of Pale Moon exclusive extensions Extensive and growing support for HTML5 and CSS3 Many customization and configuration options Pale Moon 34.3.1 changelog: Pale Moon will now exclude local resources from CSP checks, aligning it with the rest of CSP handling. Fixed an issue where the devtools JSON viewer would, in some cases, make erroneous requests to remote servers. Updated libpng to 1.6.58+apng. Updated NSS to 3.90.12 (UXP), addressing multiple security issues. Fixed several intermittent and rare crashes. Security issues addressed: CVE-2026-12318 (CWE-125), CVE-2026-12322, CVE-2026-12292 (DiD), and multiple other issues that did not have a CVE designation at the time of patching. Download: Pale Moon (64-bit) | Portable 64-bit | ~40.0 MB (Freeware) Download: Pale Moon (32-bit) | Portable 32-bit Links: Pale Moon Homepage | Add-ons | Themes | Extensions | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Onwards to Windows 12 then lol.
    • There is a long thread (128pgs and counting) that I've been following over at ElevenForums that has a method for updating Secure Boot even if there is no BIOS upgrade. I've used this method and had zero issues. NOTE:  I do not take any responsibility if this or any other Secure Boot method bricks your system -- YMMV!  Read carefully before using!
    • Yes, yes, YES, thank you AMD. Now display audio, night light, cleartype, etc, all work again.
  • Recent Achievements

    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      425
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      77
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!