*Breaking* Ebola has reached the U.S.


Recommended Posts

A patient being treated at a Dallas hospital is the first person diagnosed with Ebola in the United States, the Centers for Disease Control and Prevention announced Tuesday.

 

The person, whose identity was not released, left Liberia on September 19 and arrived in the United States on September 20, said Dr. Thomas Frieden, director of the CDC.

 

At that time, the person did not have symptoms. "But four or five days later," that person began to show symptoms, Frieden said. The person was hospitalized and isolated Sunday at a hospital in Texas.

 

Frieden sought to play down the risk to public health.

 

"It's a severe disease, which has a high case fatality rate, even with the best of care, but there are core, tried and true public health interventions that stop it," he said of Ebola.

 

"The bottom line here is that I have no doubt that we will control this importation or this case of Ebola so that it does not spread widely in this country," Frieden said.

 

 

http://www.cnn.com/2014/09/30/health/ebola-us/index.html?hpt=hp_t1

Link to comment
https://www.neowin.net/forum/topic/1231351-breaking-ebola-has-reached-the-us/
Share on other sites

unless it gets out of control in Africa...and in there it's winning :/

 

 

However, you have to consider how ill-prepared those countries were. The U.S. isn't in the same situation. I'd bet it would be quickly quarantined and treated.

However, you have to consider how ill-prepared those countries were. The U.S. isn't in the same situation. I'd bet it would be quickly quarantined and treated.

 

yes but remember that this is a high infectious virus, with a very high mortal rate.

yes but remember that this is a high infectious virus, with a very high mortal rate.

 

 

It really depends on where you're talking about. It has a high mortality and infectious rate in Africa for a number of reasons. Those being, they have a weaker infrastructure in many regards. Their health care systems are slower to respond and less able to handle outbreaks. The social views are skewed against the health care system as well as the view on ebola itself. Their funeral practices aren't modern and often involve touching and even kissing the dead bodies. Their eating practices and even the distances between cities, towns and small villages make it difficult to get health cares workers in to help out. Even the lack of basic communications is part of the problem.

 

In a modern countries like the US, EU, ect, we wouldn't have any where near the outbreak effects. We have mass communication to get the word out of even potential outbreaks. Our health care infrastructure is pretty well equipped to handle it. We have a far better ability to track down those in contact with potential infected. We don't eat bush meat, we have strict rules regarding the dead and infectious materials. We are socially far more educated on diseases in general. In practically every aspect we are far more advanced and better off. 

 

Even though this has been the worst outbreak of ebola, the mortality rates is still under it's normal rate of 90% all because there was a more proactive action this time around. It's still bad but could have been far worse in terms of over all rates. Basic smarts of washing your hands and staying away from other people's bodily fluid and you could sit next to a infected person and truly have very little to worry about.

  • Like 3

That's not really the relevant part :p

 

Well if it only spreads through body fluids, that guy was an idiot for coming into contact with body fluids of an ebola carrier and then traveling abroad having knowingly done so. He should be incinerated immediately before the virus has a chance to mutate into an airborne one.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Can you still click his nose in the about box?
    • In that case this product has no value to me. I'd rather use older Creative SB that were better in my opinion or onboard audio chip.
    • FxSound 1.2.9.0 / 1.2.10.0 Beta by Razvan Serea FxSound (formerly DFX Audio Enhancer / FxSound Enhancer) is now free, making high-quality audio enhancement accessible to everyone. Designed for all PC sound systems, from average setups to audiophile-grade equipment, it offers automatic or fully customizable processing. As automatic or customizable as you want, it utilizes the highest-grade processing to deliver more volume, better equalization, and a wider, deeper sound. For the serious audiophiles, FxSound gives you the tools to adjust the FxSound Effects and EQ to your exact preferences. Turn FxSound on and immediately hear the difference in sound quality. FxSound is ideal for budget audiophiles, music lovers, gamers, transcriptionists, Netflix enthusiasts, and more. It’s particularly beneficial for those relying on quiet laptop speakers or low-quality audio hardware. As a free tool, FxSound excels in boosting volume, enhancing bass, and improving sound quality. No other free EQ for Windows matches its ease of use. FxSound Is Now Completely Free and Unrestricted FxSound Pro is now free for everyone, not just those who can afford it. Get free and unrestricted access to better sound today. FxSound is now entirely supported by users. Click here to donate to help fund continued development and improvements to FxSound. FxSound 1.2.9.0 changelog: Auto save preset when Equalizer or Effects settings are changed Reset to factory defaults can reset the unsaved preset changes Settings dialog UI improvements for Audio and Equalizer sections Output device list is now displayed in the device preference order Preset is selected immediately when the preset for an active output device changes from settings Fixes and improvements in preferred output device selection Fixed crash issue #487 Fixed preset not getting applied and EQ flat after update (#403 and #472) Fixed system audio device not being restored on reboot (#483) Fixed preset export and import dialogs not shown when always on top is enabled Fixed audio not being restored on exit after the preset save dialog Fixed FxSound on/off handling on Windows session changes FxSound 1.2.10.0 Beta changelog: Command line options can now be applied to an already running instance of FxSound Command line option added to launch FxSound minimized to the system tray Fixed output device not being changed through hotkeys when FxSound is off (#524) Individual hotkeys can now be disabled with Delete key (#515) Fixed the but to prevent invalid hotkeys from being registered (#523) Bluetooth devices removed from device settings are removed from device preference list Fixed device detection failures Fixed application hang when retrieving the audio mix format fails Fixed presets import dialog file name combo box text alignment Fixed output device not being applied through command line Fixed a delay blocking application load when minimizing to the system tray Fixed EQ band sliders not refreshing when switching number of bands (#521) Fixed user-set mute being overridden by FxSound Fixed icon visibility in ARM64 version Finnish language support added Corrected Persian translations Download: FxSound 1.2.9.0 | ARM64 | ~70.0 MB (Open Source) Download: FxSound 1.2.10.0 Beta | ARM64 View: FxSound Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • mIRC 7.84 Final by Razvan Serea mIRC is a full featured Internet Relay Chat client for Windows that can be used to communicate, share, play or work with others on IRC networks around the world, either in multi-user group conferences or in one-to-one private discussions. It has a clean, practical interface that is highly configurable and supports features such as buddy lists, file transfers, multi-server connections, SSL encryption, proxy support, UTF-8 display, customizable sounds, spoken messages, tray notifications, message logging, and more. mIRC also has a powerful scripting language that can be used both to automate mIRC and to create applications that perform a wide range of functions from network communications to playing games. mIRC has been in development for over a decade and is constantly being improved and updated with new technologies. mIRC 7.84 changelog: Added custom dialog editbox option 'optional' for grayed out optional text. Fixed DirectShow temporary wave file not being deleted on exit. Changed $urlget() to retry a connection without compression in the event of an error. Updated code signing certificate to use Azure Artifact Signing. Fixed menubar display bug when in dark mode. Fixed /server -a not preserving existing entry's codepage. Fixed Address Book nick colors "idle time" display bug. Changed installer to no longer require administrator access on startup. Added support for displaying an MDI window's System menu when right-clicking its titlebar. Updated libararies to OpenSSL v3.5.7, TagLib v2.2.1, Zlib v1.3.2, and ADA v0.5.5. Updated CA root certificates cacert.pem file. For a full list of recent changes, please see the versions.txt file. Download: mIRC 7.84 | 4.3 MB (Shareware) View: mIRC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • You might be right... Look at his name, hiding in plain sight: hAmId.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      470
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!