How to back up my windows 8.1 drivers?


Recommended Posts

So awhile ago, I attempted to do a clean install.  

 

 

It did not go well.  Did the clean install of my Windows 8.1 x64 only to figure out, I had no working internet for my wireless because there was no driver.  So it didn't show the device. 

 

So I used the recovery media, and it worked.  So I got my driver information from HP's website. 

 

Did a new clean install,  attempted to install the drivers and they didn't work, had an error when installing that it was not correct. 

 

So did another recovery, and every driver that was with the recovery install was the same.   

 

 

Is there a program I can use to keep my drivers on a flash drive,  install the program and restore/install the working drivers? 

 

There is one program I installed called Driver Tool Kit.

 

it scanned my drivers currently installed and made backups.

Download the drivers...then try to install them before performing the clean install. Once you've found some that work, place them in a folder. When you've got all your working drivers, you can put them on a USB pen and use them when its had a clean install.

I know with Dell laptops you can download drivers from their website, i would assume HP have something similar in place? quick search on google found this http://www8.hp.com/uk/en/drivers.html so maybe type in your model number into the search?

Yeah HP's website is where I got them. But the ones that are on their site for my pc are not what came installed.

Stay away from those "drive programs" they cause more harm than good.

 

 

Go to HPs website, enter your model, download all drivers for windows 8 on a USB drive.

 

Clean install then use the usb drive to install the different drivers.

 

Otherwise, open devmgmt.msc right click your network adapter, select properties then details, then hardware id copy the string to google and search for a true Windows 8.1 driver. Download and save it to USB then do the same for any other device that was not automatically installed when performing a clean install.

 

What is your computers model and I can help

Stay away from those "drive programs" they cause more harm than good.

 

 

Go to HPs website, enter your model, download all drivers for windows 8 on a USB drive.

 

Clean install then use the usb drive to install the different drivers.

 

Otherwise, open devmgmt.msc right click your network adapter, select properties then details, then hardware id copy the string to google and search for a true Windows 8.1 driver. Download and save it to USB then do the same for any other device that was not automatically installed when performing a clean install.

 

What is your computers model and I can help

Thanks,

 

HP ENVY 700. Model 700-010xt.

 

Going to HP's website, http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5362530#N4383  

 

That has the list of drivers and whatnot.   When I did the fresh install, I went to the device manager, and there was nothing under the Network Adapters.   There was no yellow warning signs or whatnot.

 

The two that show up on their site is a

 

"Broadcom Wireless Network Controller Driver2013-04-30 , Version6.30.59.139 Rev. A,"

 

and

"Atheros Network Controller Driver2013-05-22 , Version2.1.0.13 Rev. A,"

 

I downloaded both of them and tried, and got the same warning: "doesn't meet the requirements."

 

So now however, with the recovery image.  it shows this:

 

post-27687-0-42982300-1416163125.jpg

 

So I really have no idea what the issue was.

 

 

Also right clicking on the network adapter and clicking properties doesn't show much. 

post-27687-0-07443300-1416163261.jpg

 

You are not right clicking on the individual adapters and viewing the properies thats why it does not show anything. Also like the others have said the driver backup programs do more harm than good and often are just malware. You come out better downloading them ahead of time from the manufacturer's site. Also keep in mind if you have Broadcom for wireless you might have issues connecting to enterprise networks unless you use a windows 8.0 drive instead of the 8.1 driver.

You are not right clicking on the individual adapters and viewing the properies thats why it does not show anything. Also like the others have said the driver backup programs do more harm than good and often are just malware. You come out better downloading them ahead of time from the manufacturer's site. Also keep in mind if you have Broadcom for wireless you might have issues connecting to enterprise networks unless you use a windows 8.0 drive instead of the 8.1 driver.

Sorry about that.    When I did the fresh install, it was an install of Windows 8 64, and the drivers on their site are for Windows 8.    I'd install Windows 8, do the drivers, then do windows updates to get to Windows 8.1

 

I don't need to conect to enterprise networks. 

Just navigate to "C:\Windows\System32\DriverStore\FileRepository" and sort by date.  Any of the folders that have a datestamp of the day you installed Windows or later should be backed up.  The rest came off the Windows disc.  After you reinstall you can point hardware with missing drivers to the folder you copied everything into and your drivers will install.

Sorry about that.    When I did the fresh install, it was an install of Windows 8 64, and the drivers on their site are for Windows 8.    I'd install Windows 8, do the drivers, then do windows updates to get to Windows 8.1

 

I don't need to conect to enterprise networks. 

There is now a way to skip directly to 8.1. using the 8.0 product key instead of having to do the store upgrade. This will save you a bit of time. Go here for the ISO file. http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

Doesn't the HP Envy uses driver packages? You should only need the package right for your model. Otherwise you can use DriverMax to export all your drivers. The HP Ralink driver seems to be here.

I'll remember that for next time.  Thanks!

 

So is everything good now or you still have internet issues? you actually right click each individual adapter and select properties then youll get a hardware id that you can google for exact drivers

Everything is good since I am still on the recovery version.  I haven't done another clean install yet.

 

There is now a way to skip directly to 8.1. using the 8.0 product key instead of having to do the store upgrade. This will save you a bit of time. Go here for the ISO file. http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

 

Ohh I like that! 

 

Best way to back up a driver is to put it in reverse.

 

No really, I would just download the latest ones whenever you do a restore but keep a current copy of the installer files in case they aren't available in the future.

 

Thanks.

Best Thing i have tried for drivers so far copy this folder and save into USB or something. 

 

C:\Windows\System32\DriverStore\FileRepository

 

File repository has all the drivers there and you have to just go into device manager and point to location it will install automatically. 

 

P.S-: You might have to copy that folder before starting formatting unit or use when you install windows do overwrite let that driver to go into the windows.old folder.

The first rule in a clean install is to download all your necessary drivers ahead of time.  I keep mine on a large flash drive.  Then, regardless of what you need, it's right there in front of you, especially network drivers.

driver magician lite

http://www.drivermagician.com/Lite.htm

 

scans your system and pulls out all necessary files to have them recognized in your system at the event of a fresh install.  it will not install the software that may be needed to run the hardware, example would be scanning software for scanners or wireless card software to better integrate with the wireless card or the software to configure buttons on a keyboard. 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The quantum search for Time's origin had an equally mind-boggling conclusion by Sayan Sen Image by Steve Johnson via Pexels A theoretical study from researchers at the University of Surrey suggested that the direction of time may not be fundamentally fixed in certain quantum systems. The work, published in Scientific Reports, examined how the “arrow of time” could emerge from microscopic physics and found that time-reversal symmetry can remain intact even in models used to describe processes such as energy loss and thermalisation. The arrow of time refers to the observed one-way direction from past to future in everyday life. In macroscopic processes, this is easy to see. Spilled milk spreads across a table and does not gather back into a glass, and heat flows from hotter objects to colder ones. These processes shape the common sense idea that time moves in a single direction. However, at the level of fundamental physics, many equations do not prefer a direction of time. Time-reversal symmetry means that the same physical laws can describe a system whether time moves forward or backward. This has made it difficult to explain why irreversible behaviour appears in the large-scale world even when the underlying rules do not require it. Dr Andrea Rocco, Associate Professor in Physics and Mathematical Biology at the University of Surrey, described this contrast: "One way to explain this is when you look at a process like spilt milk spreading across a table, it's clear that time is moving forward. But if you were to play that in reverse, like a movie, you'd immediately know something was wrong – it would be hard to believe milk could just gather back into a glass. However, there are processes, such as the motion of a pendulum, that look just as believable in reverse. The puzzle is that, at the most fundamental level, the laws of physics resemble the pendulum; they do not account for irreversible processes. Our findings suggest that while our common experience tells us that time only moves one way, we are just unaware that the opposite direction would have been equally possible." The study focused on open quantum systems, which are quantum systems that interact with a surrounding environment. This environment, often described as a heat bath, can exchange energy and information with the system. The researchers used this framework to study how a direction of time might appear even when the underlying physics does not enforce one. A key part of the analysis involved the Markov approximation. This is a simplification used in many models where the system is assumed not to retain memory of its past states. The idea is that changes depend only on the current state, not on earlier history. This is commonly used when studying thermalisation, which is the process where a system settles into equilibrium with its environment. The study also used concepts such as master equations, including the Lindblad and Pauli equations, which describe how probabilities of different quantum states change over time. Another related model discussed was quantum Brownian motion, which describes the random-like movement of a quantum particle interacting continuously with its environment. In these descriptions, a “memory kernel” can appear, which is a mathematical term that accounts for how past states influence current behaviour. The researchers found that applying the Markov approximation did not break time-reversal symmetry. Even when the system interacted with an effectively infinite heat bath, the resulting equations of motion remained symmetric in time. This meant that the same mathematical description could, in principle, run forward or backward in time without contradiction. The study further showed that standard frameworks used in open quantum systems, including quantum Brownian motion and master equations like the Lindblad and Pauli forms, could be written in a time-symmetric way. These equations are typically used to describe processes that look irreversible, such as dissipation and thermalisation, but the results suggested they can also be interpreted as allowing evolution in both time directions. Thomas Guff, Research Fellow in Quantum Thermodynamics, said: "The surprising part of this project was that even after making the standard simplifying assumption to our equations describing open quantum systems, the equations still behaved the same way whether the system was moving forwards or backwards in time. When we carefully worked through the maths, we found that this behaviour had to be the case because a key part of the equation, the "memory kernel," is symmetrical in time. We also found a small but important detail which is usually overlooked – a time discontinuous factor emerged that kept the time-symmetry property intact. It’s unusual to see such a mathematical mechanism in a physics equation because it's not continuous, and it was very surprising to see it appear so naturally." The researchers also noted that deriving a one-way arrow of time from time-reversal symmetric microscopic dynamics remains an open problem across fields such as thermodynamics, statistical mechanics, particle physics, and cosmology. Their results suggested that some standard descriptions of irreversible behaviour in open quantum systems may be better understood using a time-symmetric formulation of Markovianity. According to the study, processes such as thermalisation, which are usually treated as irreversible, could in theory be described in a way that allows evolution in either time direction under the same rules. This does not imply that time reversal occurs in everyday life, but rather that the underlying equations do not strictly enforce a single direction. Overall, the findings suggested that the perceived direction of time may emerge from how physical systems are modelled and approximated, rather than from a fundamental asymmetry in the laws themselves. The researchers noted that this perspective could have implications for ongoing work in quantum mechanics, thermodynamics, and cosmology on the origin of time’s arrow. Source: University of Surrey, Nature This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing
    • A bit premature... 100% Marketing. Bizarre.
    • A $300 price hike is insane! No one is going to want to pay that much!
    • Since the 1st one flopped, there is really no reason to make another one. It's just losing money left and right.
  • Recent Achievements

    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      580
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      71
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!