HP Stream 7 Sleep mode kills WiFi


Recommended Posts

Ok, This is going to sound Strange but here it goes.


 


Got a new HP stream 7 with windows 8.1, connected it to my wifi (802.11 g/n). When the tablet is awake and running it works great, wireless works great, etc. When it goes to sleep however, my wifi in the house for all the other devices (Phones, other computers, wireless bridge - that were working fine when tablet was awake) all loose the wireless connection, and ability to go to the internet, and so does the tablet. When the tablet is reconnected to the wireless  everything seems to work again. About the only thing i can think of is its 802.11 Power Save, but theres no way to turn that off. Furthermore, if i disable Wake on pattern match on the NIC, i loose the ability to go into sleep mode. The only hypothisis i have, is the Stream 7 is sending an 802.11 power save sleep packet (constently?) which the router dosent know what to do with and freezes the whole thing. Turning off the Wi-Fi or disconnecting the network makes the problem immedatly go away.


 


I have updated the BIOS on the tablet, updated the firmware on my router, Router is a Linksys E900 running DDWRT (which has no problems with any other devices), Any idea WTH is going on here? I have never seen a device do this before.


Link to comment
https://www.neowin.net/forum/topic/1237275-hp-stream-7-sleep-mode-kills-wifi/
Share on other sites

I have been experiencing the same problem since getting the HP Stream 7 (Microsoft store edition).  Yesterday the

HP Stream 7 did all the updates but the problem still exists.  I don't see anything on the modem side that is causing the problem.  Wired connections continue to work fine but ALL wifi devices get dumped and cannot reconnect.  I reboot the modem and then, most of the time, the devices come back.

 

I am running an Actiontec Q1000 with all updates.  All devices worked fine until the HP Stream 7 arrived.  I talked to CenturyLink to see if there was an error log anywhere on the Q1000 that could assist in problem solving.  Nope.  Internet searches have not yet provided any direction.  I have not yet contacted HP.

 

Anybody else experiencing the problem and any recommendations on how to proceed?

"...Router is a Linksys E900..."

 

No wireless client device should be able to bring down the AP radios.   When you encounter problems like this, the router is not able to filter out bad information and is failing.  You will find crappy routers also are subject to WiFi connectivity loss with bad Microwaves and other stray strong signals in the receive range.

 

So even if there is something horribly wrong with the HP Stream 7 drivers, it should not be possible to dump an entire WiFi network.

 

 

Curious, what other routers are people seeing this problem with?

Totally agree that no client device should be able to disable the wifi connections, but it looks like that is what is happening.  My router is the Actiontec Q1000.  I too would like to see what other routers have experienced the problem.  With the number of HP Stream 7's that have been sold I expected to see more people experiencing the problem.

Totally agree that no client device should be able to disable the wifi connections, but it looks like that is what is happening. My router is the Actiontec Q1000. I too would like to see what other routers have experienced the problem. With the number of HP Stream 7's that have been sold I expected to see more people experiencing the problem.

I suspect the problem is minimal, cause the reviews of the hp 7 stream from across the internet speak for themselves.

I seem to be experiencing a similar problem with the E Fun Nextbook 8 Windows 8.1 tablet. I believe it uses a similar, if not identical chipset to the Stream 7. My router is a Linksys E800. Temporarily, I've connected the Nextbook tablet to another access point that has no other devices connected.

20 or 40Mhz mode?

 

post-361542-0-00853600-1417757325.png

 

You may also have to turn this on:

 

post-361542-0-01603000-1417757340.png

 

 

Also when I have "antenna diversity" ticked on I have a lot less "retries" as well:

 

(Note the times present by aruba's instant controller config url)

 

post-361542-0-19997100-1417757533.png

  • 1 month later...

I have the same problem with my new HP Stream 7 killing my wireless network when it goes to sleep.  For now I have changed my "Put the computer to sleep:" option to "Never" in the Desktop>Control Panel>Hardware and Sound>Power Options>Edit Plan Settings until I find a better solution.

Yep all my networks are MLP names...Pinkiepie/PinkiePiePie is the main network,Derpy/DerpyErpy is the guest networks with 2mbps speed limits for internet and a strict ACL.  Rainbowdash is 802.11ac networks, Scootaloo is the repair client network that only has access to windows update, antivirus, google, and known software hosting sites. this is only for client PCs that I gotta work on.

 

The semi repeated name PinkiepiePie is an access point network

The fully repeated ones are PinkiepiePinkiepie for a repeater network.

 

all 3 network tiers have their own seperate VLANs as well.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But it opens the floodgates to anyone who gets a refund instead of a replacement (since refund will buy you a 1/3rd of the capacity it did years ago)
    • He has planned to file a lawsuit in small claims court so it'll only be a $1000 lesson assuming he wins. That's likely a fraction of what Samsung spends on toilet paper on a daily basis.
    • Windows Server gets DNS over HTTPS (DoH) support by Usama Jawad For the past few months, Microsoft has been previewing DNS over HTTPS (DoH) for Windows DNS Server, touting it as a foundational upgrade for zero-trust enterprise networks. It essentially introduces encrypted, authenticated DNS for the networks rather than transmitting DNS traffic in clear. Now, the company has introduced the general availability (GA) of this feature. The GA of DoH encourages organizations to deploy the solution in production environments without implementing a new client-to-resolver architecture. DoH helps improve the overall security of the network and reduces the risk of spoofing due to its zero-trust design. This is a significant change because pretty much every interaction with the network requires interfacing with DNS. DoH offers several advantages over standard DNS traffic, such as encryption using HTTPS, preventing unauthorized inspection, man-in-the-middle attacks, and traffic analysis. Since it leverages TLS certificates so that clients can verify the identity of the DNS server, it prevents spoofing through this authentication mechanism. Additionally, it's built on the DoH standard defined by the Internet Engineering Task Force (IETF), which means that it should work with modern RFC 8484-compliant clients. Finally, it integrates into the existing network architecture seamlessly and can even run in parallel with standard DNS, so that customers can migrate to the new technology at their own pace. Microsoft says that in the past few months of preview, DoH has become more stable, and customers can confidently deploy it in production environments with proper guidance. Microsoft has emphasized that migrating to DoH is necessary for organizations that are moving toward zero-trust DNS solutions. Windows clients already support DoH, but the latest availability on Windows Server provides encrypted DNS to all endpoints. The company has also mentioned that "while this release focuses on encrypting client-to-resolver communication, support for encrypted communication between Windows DNS Server and upstream DNS resolvers is planned for a future update." You can follow Microsoft's guidance to deploy DoH here, but keep in mind that you need a Windows Server 2025 installation with the latest Patch Tuesday updates installed.
    • Lol I had one of these turn faulty in Jan, guess it wasn't just bad luck lol
    • I'm team Rossmann all the way. I have the exact same NVME, altough not in an array like him.
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      184
    3. 3
      +Edouard
      159
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!