• 0

Highlighted Word text is almost unreadable when printed


Question

I've highlighted several parts of a Word document but, despite everything being perfectly readable on screen, when I print the document the colors are entirely different. I've tried all the available colors but except for yellow all of them are printed so dark that they make even black text unreadable. Is there any way to change those default colors or to tell word to not screw them up when printing?

9 answers to this question

Recommended Posts

  • 0

Can you take a picture/scan, what printer are you using?

So for example I have word document - inserted some random text. Highlighted some of it

post-14624-0-94671400-1417183809.png

Then printed it - here are pretty much default settings on my HL-3170cdw printer

post-14624-0-69299900-1417183868.png

And here I scanned the print - very easy to see the highlighted text, etc..

post-14624-0-42701000-1417183904.jpg

  • Like 1
  • 0

I have an OfficeJet 8600 Pro on Normal quality. I tried printing a sample document and scanning it but the scanner makes it way much brighter than it is.

PrRDWFy.jpg

Yellow is perfectly readable, the other light colors (green/cyan/gray) are much, much darker and on the paper the text underneath is hardly readable. I would use shading instead if it wasn't a mess to use in tables, bullet lists, etc.

  • 0

Have you tried increase quality, turn off print/toner save mode, etc. Have you don't any calibration of colors in the driver?

example in my driver

post-14624-0-44535300-1417268502.png

post-14624-0-37004900-1417268509.png

  • 0
  On 29/11/2014 at 13:48, BudMan said:

Have you tried increase quality, turn off print/toner save mode, etc. Have you don't any calibration of colors in the driver?

example in my driver

attachicon.gifcolorcal.png

attachicon.gifcolormange.png

Increasing the quality only makes it worse since it uses more ink. Also, the driver doesn't seem to ship with any ICC profile nor allow calibration other than head aligning. I'm pretty sure that 16-color palettes were printed that way on most if not all the HP printers I've owned back from the 720c in 1997. Could you please try printing a couple of lines with the light green and cyan colors to see how they look?

  • 0

^ actually that is a good suggestion.. Clearly the colors do not match screen and output. Lets see how it looks from printing from image viewer. I will try this when I get home.

  • Like 1
  • 0
  On 01/12/2014 at 05:24, ians18 said:

Could your printer be running out of ink?

If the ink was running out there would be lighter stripes, everything else seems fine for now.

 

  On 01/12/2014 at 05:41, Torolol said:

is it word problem or printer problem?

I would try printscren it, and print the result from ms-paint.

 

  On 02/12/2014 at 19:15, BudMan said:

^ actually that is a good suggestion.. Clearly the colors do not match screen and output. Lets see how it looks from printing from image viewer. I will try this when I get home.

 

If I do printscreen it's printed exactly like Word prints it (text almost unreadable). The problem feels like a RGB-CMYK conversion mess to me: if you open Photoshop, paste a screenshot of that text and press CTRL+Y (to switch to CMYK mode without conversion) you can clearly see the colors becoming just like the printed ones. BTW thanks for the tests.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I think it's bloody great, old chap!
    • Not the deal that 2nd hand purchasers tend to look for - no.  It's cheaper than the sum of it's parts new - yes.  But people looking for 2nd hand, pre-built computers are rarely looking for what you are selling. Don't misunderstand; as an informed enthusiast I like that computer, and as an informed enthusiast I am often asked "My son wants a gaming PC and here's my budget" - in which case, as an informed enthusiast I would totally point them in this sort of direction.  But I am not the mass market, hence you may well have to wait longer for a sale. If you're looking for speed - then breaking it into parts is likely to pay off better on that front, as there will be more people who suit that market and their likelihood of buying 2nd hand is more fruitful.  But - chore!
    • What is the purpose of this article? You didn't even mention that CPU is powering it, so we don't know what GPU/iGPU it has. We don't know if the memory is on chip, on the motherboard, is expandable or replaceable. And that's only the internals. Display type, resolution, brightest you didn't even mention the DPI. Without one or more if these capabilities no one who reads these strung together words will know if they should or shouldn't buy it. The only HINT is from the sticker on the photo of the laptop. Q: what do you get for wasting people's time? Their must be some value or you wouldn't have wasted your time either.
    • That is some storage. I have an old F4-210 and it works well for what it is, just a shame Terramaster will not update the software for it.
  • Recent Achievements

    • Week One Done
      Yianis earned a badge
      Week One Done
    • Veteran
      Travesty went up a rank
      Veteran
    • One Month Later
      somar86 earned a badge
      One Month Later
    • Week One Done
      somar86 earned a badge
      Week One Done
    • Apprentice
      Adrian Williams went up a rank
      Apprentice
  • Popular Contributors

    1. 1
      +primortal
      506
    2. 2
      ATLien_0
      260
    3. 3
      +Edouard
      186
    4. 4
      +FloatingFatMan
      176
    5. 5
      snowy owl
      132
  • Tell a friend

    Love Neowin? Tell a friend!