• 0

Highlighted Word text is almost unreadable when printed


Question

I've highlighted several parts of a Word document but, despite everything being perfectly readable on screen, when I print the document the colors are entirely different. I've tried all the available colors but except for yellow all of them are printed so dark that they make even black text unreadable. Is there any way to change those default colors or to tell word to not screw them up when printing?

9 answers to this question

Recommended Posts

  • 0

Can you take a picture/scan, what printer are you using?

So for example I have word document - inserted some random text. Highlighted some of it

post-14624-0-94671400-1417183809.png

Then printed it - here are pretty much default settings on my HL-3170cdw printer

post-14624-0-69299900-1417183868.png

And here I scanned the print - very easy to see the highlighted text, etc..

post-14624-0-42701000-1417183904.jpg

  • Like 1
  • 0

I have an OfficeJet 8600 Pro on Normal quality. I tried printing a sample document and scanning it but the scanner makes it way much brighter than it is.

PrRDWFy.jpg

Yellow is perfectly readable, the other light colors (green/cyan/gray) are much, much darker and on the paper the text underneath is hardly readable. I would use shading instead if it wasn't a mess to use in tables, bullet lists, etc.

  • 0

Have you tried increase quality, turn off print/toner save mode, etc. Have you don't any calibration of colors in the driver?

example in my driver

post-14624-0-44535300-1417268502.png

post-14624-0-37004900-1417268509.png

  • 0
  On 29/11/2014 at 13:48, BudMan said:

Have you tried increase quality, turn off print/toner save mode, etc. Have you don't any calibration of colors in the driver?

example in my driver

attachicon.gifcolorcal.png

attachicon.gifcolormange.png

Increasing the quality only makes it worse since it uses more ink. Also, the driver doesn't seem to ship with any ICC profile nor allow calibration other than head aligning. I'm pretty sure that 16-color palettes were printed that way on most if not all the HP printers I've owned back from the 720c in 1997. Could you please try printing a couple of lines with the light green and cyan colors to see how they look?

  • 0

^ actually that is a good suggestion.. Clearly the colors do not match screen and output. Lets see how it looks from printing from image viewer. I will try this when I get home.

  • Like 1
  • 0
  On 01/12/2014 at 05:24, ians18 said:

Could your printer be running out of ink?

If the ink was running out there would be lighter stripes, everything else seems fine for now.

 

  On 01/12/2014 at 05:41, Torolol said:

is it word problem or printer problem?

I would try printscren it, and print the result from ms-paint.

 

  On 02/12/2014 at 19:15, BudMan said:

^ actually that is a good suggestion.. Clearly the colors do not match screen and output. Lets see how it looks from printing from image viewer. I will try this when I get home.

 

If I do printscreen it's printed exactly like Word prints it (text almost unreadable). The problem feels like a RGB-CMYK conversion mess to me: if you open Photoshop, paste a screenshot of that text and press CTRL+Y (to switch to CMYK mode without conversion) you can clearly see the colors becoming just like the printed ones. BTW thanks for the tests.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This is what I thought of earlier today because it seems a bit stupid to have an iPhone 17 running iOS 26 (or iOS 2026 / or even iOS 25/2025). Just make it simple so that the year of the hardware release and the software release are in sync. I personally think they should go with 25 or 2025 (not 26 or 2026), but syncing the hardware and software version numbers could be easier to keep track of. At first, it will maybe be jarring due to all of the changes across the ecosystem, but from that point on it will be easier to keep track of.
    • my dad is experiencing the same thing except it's with Excel. the font became thin compared to windows 10, all the settings the same. i've chalked it up to it being that its connected via DVI instead of HDMI. is your setup the same? i have no technical reasons to believe it's DVI, just a plain guess since the other screen he's connected to seems better to me although may just be my mind playing tricks.  also, why don't you change the text size in accessibility? maybe this will help?   
    • I think you missed the point. I don't know why I think 2026 makes more sense than 26. Microsoft didn't call it Office 16, they referred to the (next) year of the product and so the naming convention made sense. Going from 19 to 26 could cause confusion for someone that takes a glance; I guess that is my thought process. But you're right, it doesn't make a difference. Although by that token, why change the naming convention to begin with?
    • I have checked the scaling, and it is not different at all I reapplied my current theme and no thing changed.   Fonts still too damn small and NO OPTION IN WINDOWS TO ADDRESS IT ANYMORE!   Removing options for customization is NOT UPGRADING IN ANYWAY!
  • Recent Achievements

    • Week One Done
      abortretryfail earned a badge
      Week One Done
    • First Post
      Mr bot earned a badge
      First Post
    • First Post
      Bkl211 earned a badge
      First Post
    • One Year In
      Mido gaber earned a badge
      One Year In
    • One Year In
      Vladimir Migunov earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      492
    2. 2
      +FloatingFatMan
      256
    3. 3
      snowy owl
      248
    4. 4
      ATLien_0
      224
    5. 5
      +Edouard
      189
  • Tell a friend

    Love Neowin? Tell a friend!