Recommended Posts

6 hours ago, LostCat said:

My ISP did run fiber out here in the ass end of nowhere and I love them for it.  I’d love to stay with them, but they refuse to enable ipv6 which irritates me.  I can’t guarantee anything about Starlink but I suspect they’ll support modern routing protocols better and have better latency over longer distances than land networks so depending on initial setup costs I’d love to move over.[/quote]

Internally StarLink won't use ipv6 but something faster and made for sat-2-sat laser routing. 

Quote

I’m not saying I actually need it, just that tech companies that refuse to keep up with the times are another reason to switch.

Unless they move to join the party these ISP dinosaurs will also meet their fate at the hands of space-based disruptors.  

1 hour ago, DocM said:

Internally StarLink won't use ipv6 but something faster and made for sat-2-sat laser routing. 

Right, but to actually talk to other computers on the internet you still need a source and destination address so somewhere it's got to be translated into common protocols.

3 hours ago, LostCat said:

Right, but to actually talk to other computers on the internet you still need a source and destination address so somewhere it's got to be translated into common protocols.

Right. And the proposed solar system internet will likely be using NASA's  Delay/Disruption Tolerant Network (DTN). Musk was talking today about using StarLink derived satellites at the Mars end.

StarLink gateways are going I to Australia and New Zealand.

 

Canada's CRTC has issued a BITS license to StarLink, good to 2030.

 

https://crtc.gc.ca/eng/archive/2020/lt201015.htm?_ga=2.37305056.1391295878.1602986695-818203350.1602986695

 

Quote

Canada's CRTC has licensed StarLink for Basic International Telecommunications Services (BITS).

Telecom Commission Letter addressed to Bret Johnsen (Space Exploration Technologies Corp.)

Ottawa, 15 October 2020

Our reference: 8190-S206-202002799

BY EMAIL

Bret Johnsen
Space Exploration Technologies Corp.
1 Rocket Road
Hawthorne, California  90250
UNITED STATES OF AMERICA

Re: Application for a Basic International Telecommunications Services (BITS) Licence

Dear Bret Johnsen,

On 15 May 2020, Space Exploration Technologies Corp. completed an application for a Basic International Telecommunications Services (BITS) licence for the provision of international telecommunications services, pursuant to section 16.3 of the Telecommunications Act (the Act). 

The Commission received 2585 interventions regarding Space Exploration Technologies Corp.’s BITS application. After consideration of the comments received, the Commission has approved the application and a BITS licence is enclosed.

Please note the BITS licence conditions, which can be viewed on the back of the enclosed licence, include regular filings to the Commission.

The Commission notes that a BITS licence does not by itself authorize an entity to operate as a facilities-based carrier or non-facilities-based service provider. All entities who provide services as a facilities-based carrier must at all times comply with the appropriate regulatory framework, including the ownership and control requirements of section 16 of the Act and the Canadian Telecommunications Common Carrier Ownership and Control Regulations. Entities who provide services as a non-facilities-based service provider must register as such with the Commission and comply at all times with the appropriate regulatory framework.

Sincerely,

Original signed by

Claude Doucet    
Secretary General

Enclosures

 

 

I'm curious what the initial hardware and service costs will be.  I want the service, but considering it won't be a huge speed upgrade for me it depends.

 

And most everyone has a habit of lowballing early service prices then raising them later, so there's that too.

20 hours ago, DocM said:

Oh, My... MS Azure + StarLink

 

 

 

The SpaceX StarLink + Microsoft Azure alliance is deepening. 

 

Earlier article

https://spacenews.com/spacex-ses-to-provide-broadband-for-microsofts-azure-space-mobile-data-centers/

 

New article

https://spacenews.com/spacex-teams-with-microsoft-for-space-development-agency-contract/

 

SpaceX teams with Microsoft for Space Development Agency contract

WASHINGTON — SpaceX earlier this month won a $149 million contract from the Defense Department’s Space Development Agency to build four satellites to detect and track ballistic and hypersonic missiles.

Gwynne Shotwell, SpaceX president and chief of operating officer, revealed in a pre-recorded interview released Oct. 20 that Microsoft is a subcontractor working on the SDA program with SpaceX. 

Shotwell in the video spoke with Tom Keane, corporate vice president of Microsoft Azure Global, about a new agreement to use SpaceX’s Starlink satellite broadband to connect Azure cloud computing data centers deployed around the world.  

Keane also asked Shotwell to discuss the companies’ other partnership for the SDA contract.

“We were pleased that Microsoft was on our team,” said Shotwell. “We will be delivering to the government a number of satellites that host a capability to protect against ballistic weapons,” she added. “Microsoft will be doing quite a bit of work as a subcontractor which I think was kind of a funny twist to the relationship here.”

The SDA satellites, to be delivered by September 2022, will have a “wide field of view” overhead persistent infrared sensor capable of detecting and tracking advanced missile threats from low Earth orbit. The spacecraft will have optical crosslinks to pass data to relay satellites. 

>

Starlink US pricing,

 

After the FCC rural subsidy auction, and assuming SpaceX gets funding, covered customer's costs should be lower.

 

And if those revenue estimates hold up, SpaceX will have 50% more income than NASA has budget.

 

https://www.cnbc.com/2020/10/27/spacex-starlink-service-priced-at-99-a-month-public-beta-test-begins.html

Quote

SpaceX’s Starlink satellite internet service is priced at $99 per month, according to e-mail

 

SpaceX is expanding the beta test of its Starlink satellite internet service, reaching out via email on Monday to people who expressed interest in signing up for the service.

Known as the “Better Than Nothing Beta” test, according to multiple screenshots of the email seen by CNBC, initial Starlink service is priced at $99 a month – plus a $499 upfront cost to order the Starlink Kit. That kit includes a user terminal to connect to the satellites, a mounting tripod and a wifi router. There is also now a Starlink app listed by SpaceX on the Google Play and Apple iOS app stores.
>
...Elon Musk’s company posted that form in June and, less than two months later, SpaceX said that “nearly 700,000 individuals” across the United States had indicated interest in the service.
>
...The network is an ambitious endeavor, which SpaceX has said will cost about $10 billion or more to build. But the company’s leadership estimate that Starlink could bring in as much as $30 billion a year, or more than 10 times the annual revenue of its rocket business.
>

 

1 hour ago, LostCat said:

Alright I expected an up front cost but damn o.O

 

I guess I'm out.  My current stuff is good enough at that point.

 

If you're in the US the rural govt. subsidies from FCC could lower costs if SpaceX wins a bid in one of the upcoming auctions.  These prices also may not apply overseas.

3 hours ago, LostCat said:

Alright I expected an up front cost but damn o.O

 

I guess I'm out.  My current stuff is good enough at that point.

They will most likely end up with a plan that has the upfront cost rolled into plan, once the service starts outside of beta, or you get it on a lease and need to send it back when you stop using it.

 

But im guessing your not their target market. Mainly people still running ADSL1 or current satellite services would jump at that deal(if they can afford it).

Im not sure they will get to their estimated $30 billion, which is about 300 million subscribers. There is many, many more people that would want the service but may not be able to afford it, especially in places like India, middle east, island nations, etc.

3 hours ago, IsItPluggedIn said:

>

Im not sure they will get to their estimated $30 billion, which is about 300 million subscribers. There is many, many more people that would want the service but may not be able to afford it, especially in places like India, middle east, island nations, etc.

 

SpaceX has said international pricing levels will be localized, lower prices where incomes are low, and Morgan Stanley values StarLink alone at $80.9 billion. That's $30B more than Northrop-Grumman and just under Boeing.

4 hours ago, IsItPluggedIn said:

But im guessing your not their target market. Mainly people still running ADSL1 or current satellite services would jump at that deal(if they can afford it).

Never said I was their target market heh.  But I do appreciate an upgrade (in tech if not in the entire package) so I'm still going to be interested whether I buy or not.

  • 2 weeks later...

Unsurprisingly it's a little rough in bad weather and early results.

https://arstechnica.com/information-technology/2020/11/spacex-starlink-has-some-hiccups-as-expected-but-users-are-impressed/

I'll hold opinions except that it's definitely not replacing my service as is, we'll see how it goes over time.

53 minutes ago, LostCat said:

Unsurprisingly it's a little rough in bad weather and early results.

https://arstechnica.com/information-technology/2020/11/spacex-starlink-has-some-hiccups-as-expected-but-users-are-impressed/

I'll hold opinions except that it's definitely not replacing my service as is, we'll see how it goes over time.

It depends on the material obstructing the beam and the number of visible satellites, which will increase exponentially in short order - another batch going up this weekend. Snow isn't as big a problem as rain, and because of the shorter distance vs. geostationary satellites the signal is much, much stronger.  This distance decrease also loweres the latency.

 

This guy seems to like it

 

  • Like 1
  • 3 weeks later...

SpaceX's StarLink gets Federal funding for rural internet... 

 

Hit the business press after FCC filings this morning, showing they got a big chunk of the $9.2 billion program. Geostationary providers like Hughes and ViaSat, not so much - their latencies are too high.

 

This is a Really. Big. Deal.

 

 

 

 

 

  • 1 month later...
  • 3 weeks later...
1 hour ago, LostCat said:

Woof I think I would jump on that 300Mb service.

 

Still fairly happy with my current service but who would argue with a 3x increase at the same price?

 

A recent FCC filing says they're planning to offer up to 10 Gbps with their next-gen satellites.

  • 2 weeks later...

Building StarLink hardware in Texas, not CA or WA.

 

https://boards.greenhouse.io/spacex/jobs/5111363002?gh_jid=5111363002

 

 

Quote

 

AUTOMATION & CONTROLS ENGINEER (STARLINK)

 

Remote - Austin, TX

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

 

AUTOMATION & CONTROLS ENGINEER (STARLINK)

 

SpaceX is developing a low latency, broadband internet system to meet the needs of consumers across the globe. Enabled by a constellation of low Earth orbit satellites, Starlink will provide fast, reliable internet to populations with little or no connectivity, including those in rural communities and places where existing services are too expensive or unreliable. Starlink is now delivering initial beta service and accepting pre-orders both domestically and internationally, and will continue expansion to near global coverage of the populated world in 2021.

To keep up with global demand, SpaceX is breaking ground on a new, state of the art manufacturing facility in Austin, TX. The Automation & Controls Engineer will play a key role as we strive to manufacture millions of consumer facing devices that we ship directly to customers (Starlink dishes, Wi-Fi routers, mounting hardware, etc). Specifically, they will design and develop control systems and software for production line machinery – ultimately tackling the toughest mechanical, software, and electrical challenges that come with high volume manufacturing, all while maintaining a focus on flexibility, reliability, maintainability, and ease of use.

>

 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The Light of Life? We actually do glow till our Death, study finds by Sayan Sen Image by Rafael Rendon via Pexels A study by researchers at the University of Calgary has found that living organisms produce an extremely faint light known as ultraweak photon emission, and that this glow appears to drop significantly after death. The research was published in the Journal of Physical Chemistry in April 2025 and quickly drew widespread attention, leading to more than 200 news stories about the findings. Ultraweak photon emission (or UPE), sometimes called biophoton emission, refers to tiny amounts of light released by living cells as a result of normal biological activity. A photon is the basic particle of light, and researchers say every living system examined so far, including plants and animals, has been found to emit these photons. The glow is far too faint to be seen by the human eye. “I suppose it has a little to do with people being reminded of auras,” says Dr. Christoph Simon, PhD, one of the authors of the study and a professor in the Department of Physics and Astronomy in the Faculty of Science. “It is a fact that living beings glow. It’s a very weak glow, but it’s there and visible with very sensitive cameras.” According to the study, the light involved is extremely weak, ranging from 10 to 1,000 photons per square centimetre per second across a spectral range of 200 to 1,000 nanometres. For comparison, a nanometre is one-billionth of a metre and is commonly used to measure wavelengths of light. Detecting emissions at such low levels requires highly specialized equipment. To study the phenomenon, researchers used electron-multiplying charge-coupled device (EMCCD) and charge-coupled device (CCD) cameras. These imaging systems are designed to detect extremely small amounts of light, including individual photons, while minimizing background noise. The technology allowed researchers to capture signals that would otherwise be impossible to observe. The team worked with the Human Health Therapeutics Research Centre at the National Research Council of Canada (NRC) in Ottawa to examine photon emissions in mice. Researchers took two-hour exposure images of the animals before and after death and compared the results. “We saw that the level of light that they emit – this biophoton glow – is distinctly different between living and dead animals,” says Dr. Daniel Oblak, PhD, an associate professor in Physics and Astronomy and the corresponding author of the study. The images showed a clear decrease in photon emissions after death across the entire body of each mouse. According to the researchers, this provided direct evidence that living and dead tissue produce different levels of ultraweak photon emission. “It’s a very small amount and it’s, of course, very tricky to detect,” Oblak says. The study grew out of discussions between Simon, whose research interests include quantum biology, and Oblak, whose work focuses on detecting light for quantum communication experiments. Quantum biology is a field that explores whether processes described by quantum physics, which studies matter and energy at very small scales, may also play a role in living systems. “Since I work as a quantum physicist on light detection for quantum communication, I thought that experimentally we have a lot of the tools to be able to detect the light,” Oblak explains. The researchers also investigated UPE in plants and found that the light changed in response to stress. When plants were exposed to higher temperatures or physically injured, their photon emissions increased. Chemical treatments also affected the glow. Among the substances tested, the local anesthetic benzocaine produced the strongest emission response when applied to injured plant tissue. These findings suggest that ultraweak photon emission is closely linked to biochemical and metabolic activity inside living organisms. Metabolism refers to the chemical reactions that allow cells and organisms to stay alive and function. Because these reactions change when an organism experiences stress, injury or disease, researchers believe UPE may provide a way to monitor those changes. The researchers stress that the glow is a physical and biological phenomenon, not a metaphysical one. Oblak says more research is needed to understand exactly how the light is produced and what information it may reveal about the condition of living tissue. “We must understand what that is to figure out what’s happening,” he says. “If we can understand how that relates to certain influences on the body – stress, diseases – then that could be used as a diagnostic tool.” The researchers believe the technique could eventually help scientists study health and disease without invasive procedures. Because UPE can be measured without adding dyes, markers or labels, it may offer a way to monitor whether tissue is healthy, damaged or alive. In plants, it could help researchers better understand how organisms respond to injury, heat and other forms of stress. While the work is still in its early stages, the study demonstrates that ultraweak photon emission imaging can provide a non-invasive and label-free way to observe biological activity. Researchers say the approach could become a useful tool for studying vitality, stress responses and other important processes in both animals and plants. Source: University of Calgary, ACS publication This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Damn, I loved this show back in the day.  
    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      514
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      81
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      72
  • Tell a friend

    Love Neowin? Tell a friend!