Recommended Posts

Vulcan can use the Delta IV 5 meter tanks, perhaps with a slight stretch. That'll save all new tooling. Where they really save is by not having to use an engine, valves and plumbing that is resistant to liquid hydrogen embrittlement.

Methane plumbing is far easier and cheaper, plus they can ditch and replace the sticking fuel valves that have plagued Delta IV and Delta IV Heavy from the beginning. That was the cause of the scrub of the Orion test flight.

  • Like 1

SpaceNews article about Blue Origin future space tourism.....

 

 

 

On the experience of weightlessness, Patrick said, "It opens up possibilities for movement that you've just never had here on Earth. It's a shared experience with your crew, but it's also profoundly personal. So you really feel a part of the unfathomable depths of the cosmos."

Blue Origin has not said when commercial flights aboard the New Shepard spacecraft will be available or how much they will cost, but interested parties can fill out an information form on the company website to receive "early access to pricing information and tickets when we open reservations."

http://www.space.com/29728-blue-origin-private-spaceflight-video.html

 

post-546174-0-11470800-1435211293.jpg

http://www.space.com/29728-blue-origin-private-spaceflight-video.html

 

 

  • 1 month later...

http://www.floridatoday.com/story/tech/science/space/2015/08/19/space-florida-approves-bonus-pay-plan/32003077/

 

Florida nears launch deal with Blue Origin

Space Florida [note: a state agency] is in the final stages of negotiations expected to earn Blue Origin's commitment to build rockets in Brevard County and launch them from Cape Canaveral Air Force Station.

The agency's board today gave its approval for staff to finalize the terms of financing and lease agreements with the private space company founded by Amazon.com CEO and billionaire Jeff Bezos, which aims to lower the cost of launching people to orbit.

The board meeting's discussion referred to the deal only by its code name of Project Panther, which FLORIDA TODAY sources have previously confirmed involves Blue Origin.

Space Florida President and CEO Frank DiBello said he expected more details to be made public "in the next month or so."

Howard Haug, Space Florida's treasurer and chief investment officer, said the deal represented more than $200 million of investment and several hundred jobs.

The funding will include $18 million combined from the Florida Department of Transportation, which supports aerospace infrastructure, and from the North Brevard Economic Development Zone.

FLORIDA TODAY earlier this year reported that the deal envisioned Blue Origin flying orbital missions from Cape Canaveral's Launch Complex 36. A manufacturing facility would be built in Exploration Park, the research and development park located just outside Kennedy Space Center's south gate.

Blue Origin is currently developing the New Shepard vehicle for suborbital flights of space tourists and science experiments launching from the company's private launch site in West Texas.

While developing a larger orbital rocket that would launch from Florida, the company also is developing an engine that United Launch Alliance hopes will power a new rocket slated to replace the Atlas V and its Russian-made engine.
>

  • Like 2

As per Doc's Florida/Blue Origin post...here is another article...

Blue Origin Plans September Announcement in Florida

burchandbezos05-1024x768-879x485.thumb.j
Jeff Bezos (right), seen here with United Launch Alliance's Tory Bruno at a September 2014 press conference, will make a Sept. 15 announcement in Florida about Blue Origin's plans there. Credit: SpaceNews/Brian Berger

WASHINGTON — Commercial space transportation company Blue Origin said Aug. 24 that it will make an announcement in Florida in September widely believed to be linked to proposals to build and launch rockets from there.

In a statement, the company said that Jeff Bezos, the billionaire founder of Blue Origin, “will make a significant announcement regarding the emerging commercial launch industry” Sept. 15 at Cape Canaveral Air Force Station in Florida. The company offered no other details about the nature of the planned announcement.

Blue Origin has been tied in recent months to an effort by Space Florida, the state’s space development organization, for developing a manufacturing and launch site at Cape Canaveral. Space Florida has been involved in negotiations for what it calls “Project Panther,” which minutes of the organization’s public board meetings describe as “a company evaluating Florida site selection in conjunction with operational activities including manufacturing and payload processing facilities.”

 

The Space Florida documents don’t explicitly identify Blue Origin as the Project Panther company. However, in April the newspaper Florida Today linked Project Panther to Blue Origin when Sen. Bill Nelson (D-Fla.) told the publication that he had been in discussions with Bezos regarding a Florida facility for Blue Origin.

Project Panther, according to public documents, involves “securing long-term land and facility use agreements at the Cape Canaveral Spaceport Complex from Space Florida for properties Space Florida either currently holds such rights or has the option to acquire rights.” The Space Florida board approved a motion at its most recent board meeting Aug. 19 to allow the organization’s management to complete negotiations on those agreements.

Blue Origin, based in the Seattle suburb of Kent, Washington, owns its own test site in West Texas that it has used for flight tests of its New Shepard suborbital vehicle. However, the company has aspirations to develop an orbital launch vehicle as well. “Our long-term goal is to build orbital launch vehicle capabilities,” Blue Origin president Rob Meyerson said at an April press conference about the company’s engine development work.

Meyerson, at that press conference, said that the company was looking at several locations in the United States for a future orbital launch site. “We’re looking at a number of states, and we’re not releasing which states those are,” he said, but added that “Florida is one of those states.”

 

 

 http://spacenews.com/blue-origin-plans-september-announcement-in-florida/

Cheers.....

  • Like 2
  • 1 month later...

Blue Origin Reaches Milestone in BE-4 Engine Development 

BE-4-Web1-879x485.thumb.jpg.c87ce3d79468
Testing of components of the BE-4 engine is in progress at Blue Origin's facilities in West Texas. Credit: Blue Origin photo 

WASHINGTON — Blue Origin said Sept. 30 that it has completed more than 100 developmental tests of its BE-4 engine, which the company is building both for United Launch Alliance and its own vehicle.

The company said in a statement that the staged-combustion tests, performed at the company’s test site in West Texas, provided “measurable performance data” about the engine for its upcoming critical design review. That data covered various elements of the engine’s design and its manufacturing techniques, including the use of 3-D printing.

“We tested a number of injector element designs and chamber lengths at a variety of operational conditions,” said Rob Meyerson, president of Blue Origin, in the statement. “Rigorous component testing ahead of full-engine testing significantly increases confidence in the development schedule and projected performance.”

The BE-4 engine, under development by Blue Origin since 2011, uses liquefied natural gas and liquid oxygen propellants, and is designed to produce up to 550,000 pounds-force of thrust. The BE-4 will be the first large engine to use that propellant combination, although SpaceX has said it is working on a large engine called Raptor that uses the same propellants.

The company did not disclose a schedule for future development of the engine in its statement, and spokeswoman Julie Arnold declined to provide an estimated date for the engine’s critical design review. In an April press briefing, Meyerson said full engine tests would take place in 2016, with the engine ready for service in 2017.

Blue Origin is developing BE-4 for the first stage of an orbital launch vehicle it announced during a Sept. 15 event at Cape Canaveral, Florida. Blue Origin plans to manufacture and launch that vehicle there, building facilities that include a test stand to carry out acceptance tests of the BE-4.

The BE-4 engine is also the leading candidate to be used in the first stage of ULA’s Vulcan vehicle. Speaking to reporters after the Sept. 15 Florida event, Blue Origin founder Jeff Bezos said that while he was aware of competing engines for the Vulcan, like the AR-1 under development by Aerojet Rocketdyne, he was focused on completing the BE-4. “We’re going to build the best 21st century engine that we can for ULA,” he said. “Ultimately they will make the decision about what they want to do.”

Bezos also noted that, unlike the AR-1 or other concepts, Blue Origin was not seeking funding from the U.S. Air Force to help pay for development of the BE-4. “The most unique feature of the BE-4 engine is that it’s fully funded,” he said. “It’s not something you see in rocket engine programs very often.”

 

http://spacenews.com/blue-origin-reaches-milestone-in-be-4-engine-development/

Fully funded by Bezos...gotta love this...newspace ventures owning their engines.......:D

  • Like 1

Sounds like they are working their way up, sub assembly at a time, similar to Raptor development. I assume that they must be close, in order to state "engine tests beginning in 2016"....?.....:)

  • Like 1

I'm happy with anyone pushing new technology, especially NewSpace Companies who are footing the bill themselves for development.

And if the BE-4 is selected by ULA, it means that NewSpace has effectively won. 

It makes SO much sense for ULA to use the BE-4 .. minimal (still substantial) reconfiguring required, minimal (but still substantial) everything. Take the opportunity to update your Delta-IV and Atlas-V platforms with these engines and some better design changes while you're at it, give them the capability to eject the engine cores (so they can be reused), and bump up the version numbers for rebranding.

All that's left to do is test the changes, and for goodness sake ditch the current Engine Core Retrieval Plan, ULA.

Good going, Blue Origin. You're gonna be swimming in money if you pull it off. :yes:

  • Like 1

Jeff Foust ‏@jeff_foust  9m9 minutes ago
Meyerson: next New Shepard test flight next the end of this year. Want to get through test program before starting to sell tix. #ispcs

@StephenClark1
Meyerson: BE-4 engine for Vulcan and our orbital launcher entering critical design review phase. Development engine testing next yr. #ISPCS

  • 1 month later...

Blue Origin Plans To Begin Commercial Suborbital Research Flights in 2016 

blueorigin_launch-879x485.thumb.jpg.a980
The New Shepard space vehicle blasts off on its first developmental test flight over Blue Origin’s West Texas Launch Site April 29. The crew capsule reached apogee at 93,600 meters before beginning its descent back to Earth. Credit: Blue Origin photo 

WASHINGTON — Blue Origin expects to start launching commercial payloads on its New Shepard suborbital vehicle by the middle of next year, hoping to reinvigorate interest in flying experiments on such vehicles, a company official said Nov. 10. 

Erika Wagner, business development manager for Blue Origin, said the company was making plans for another test flight of its New Shepard vehicle by the end of this year which, if successful, would keep the company on track for commercial flights of payloads, but not people, in 2016.

“We’re aiming for the second quarter of next year,” she said at a microgravity workshop organized by Houston-based NanoRacks, a company partnering with Blue Origin to provide standardized payload accommodations for experiments flying on New Shepard.

That schedule, she said, depends on the progress Blue Origin makes with test flights of the vehicle. The company launched New Shepard on an April 29 flight from its West Texas test site. Although the vehicle’s propulsion module failed to make a powered landing because of a problem with its hydraulics system, the rest of the vehicle performed well. “If you had been on board that flight, you would have had a great day,” she said.

The next test flight, she said, is planned to take place by the end of the year, a schedule that Blue Origin president Rob Meyerson also gave in an Oct. 7 speech at the International Symposium for Personal and Commercial Spaceflight in Las Cruces, New Mexico. Neither Meyerson nor Wagner said how many additional test flights the company expects to fly before beginning commercial payload flights.

Wagner added that the schedule for beginning commercial flights also depends on when the company receives its commercial launch license from the Federal Aviation Administration. The April flight of New Shepard took place under an experimental permit, which allows for tests of suborbital vehicles, but prohibits carrying payloads for hire.

The permit, though, does allow the company to fly payloads on the vehicle without charging. Wagner said that the company has several “pathfinder” payloads contributed by researchers that will fly on a New Shepard test flight in the next few months.

One of the people providing payloads for those test flights, Steven Collicott, a professor of aeronautics and astronautics at Purdue University, said he’s pleased with what he has seen so far from Blue Origin. “There’s a wealth of control, power and data options” for experiments, he said. “It’s really very impressive.”

The payload accommodations for experiments on New Shepard are similar to the middeck lockers used for International Space Station experiments, but Wagner said Blue Origin and NanoRacks, which handles payload sales and integration for New Shepard flights, can accommodate customized experiments as well. The companies are offering a special option for student experiments, similar in size to a two-unit cubesat, for $5,300.

Wagner also said that, as Blue Origin ramps up research flights, it will offer additional features for those payloads. Those include access to the capsule’s large windows, externally mounted experiments, and hands-on access to experiments by crewmembers during flight. While Blue Origin is planning to carry out dedicated research flights on a quarterly basis, she said the vehicle can be prepared for another flight within 24 hours for those experiments that require rapid turnaround.

Blue Origin’s activities come as interest in commercial suborbital research flights, which was strong several years ago, has faded as companies developing those vehicles suffered delays. Collicott, a member of the Commercial Spaceflight Federation’s Suborbital Applications Researchers Group, advocated for suborbital research in a talk at the annual meeting of the American Society for Gravitational and Space Research here Nov. 12.

“People say to me, ‘Well, the rocket’s aren’t flying. They’re not ready for me today,’” he said to an audience primarily of researchers. “My answer is, ‘That’s fine. Is your experiment ready today?’” In most cases, he said, they’re not, giving scientists time to seek funding and build experiment hardware as suborbital vehicles continue their development.

“Real flights are happening,” he added, noting that besides the development work by Blue Origin and other companies, he flew an experiment on a commercial sounding rocket launched by UP Aerospace from Spaceport America in New Mexico Nov. 6. “This is not a future endeavor.” 

 http://spacenews.com/blue-origin-plans-to-begin-commercial-suborbital-research-flights-in-2016/

The suborbital bird serves several purposes,

1) revenue from joyrides and experimental microgravity payloads

2) flight history for both the stage and the BE-3 LH2 engine which,

3) will form the basis of their large launchers upper stage

4) the suborbital spacecrafts systems will evolve into their orbital crew spacecrafts  systems, it being a biconic capsule

And they have little interest in military or commercial satellite launches. Blues focus is manned spaceflight.

  • 2 weeks later...

The back n forth begins,

@elonmusk
Congrats to Jeff Bezos and the BO team for achieving VTOL on their booster
>
It is, however, important to clear up the difference between "space" and "orbit", as described well byhttps://t.co/7PD42m37fZ
>
Getting to space needs ~Mach 3, but GTO orbit requires ~Mach 30. The energy needed is the square, i.e. 9 units for space and 900 for orbit.
>
@TobiasVdb The F9 booster can reach low orbit as a single stage if not carrying the upper stage and a heavy satellite.

@jeffbezos
The rarest of beasts - a used rocket. Controlled landing not easy, but done right, can look easy. Check out video:https://t.co/9OypFoxZk3

@elonmusk
@JeffBezos Not quite "rarest". SpaceX Grasshopper rocket did 6 suborbital flights 3 years ago & is still around.https://t.co/6j9ERKCNZl
>
But credit for 1st reusable suborbital rocket goes to X-15https://t.co/LSb0f8FLJd
And Burt Rutan for commercial
https://t.co/TGWlNjsyQz

They did well landing the unit....taking nothing away from them....but, big difference when compared to the speed, range and horizontal component of flight...and landing on a rolling, movable deck with a large Falcon 9 first stage.:)

  • 1 month later...

Flight restrictions around Blues test site. Looks like a New Shepard test flight.

 

FDC 6/4629 ZAB NM..AIRSPACE VAN HORN, TX..TEMPORARY FLIGHT RESTRICTIONS DUE TO SPACE FLIGHT OPERATIONS WITHIN AN AREA DEFINED AS 17NM RADIUS OF 3127N10446W OR THE SALT FLAT /SFL/ VORTAC 125 DEGREE RADIAL AT 24NM, SFC TO UNL. PURSUANT TO 14CFR SECTION 91.143 TEMPORARY FLIGHT RESTRICTIONS ARE IN EFFECT. AUDREY POWERS, TELEPHONE 432-207-2132, IS IN CHARGE OF OPERATION. ALBUQUERQUE ARTCC /ZAB/, TELEPHONE 505-856-4500, IS THE FAA COORDINATION FACILITY. DLY 1300-2100 1601201300-1601222100

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hands-on with BOOX Tappy: cute little reading accessory by Taras Buria Page turners are quite popular accessories for e-readers, as they enable a hands-free reading experience, which is particularly useful with large readers featuring 10-inch or larger displays. The BOOX Tappy is a new accessory that was introduced earlier this year, and we took this cute-looking thingy for a spin. The Tappy comes in a small box, with two additional buttons and a user manual. The device is made of glossy green plastic and resembles old appliances from the nuclear age. Material quality is great, and each part feels quite premium. Plastic is high-quality, the switch is nice to flick, and the buttons are not rattly. At the bottom, four rubberized feet prevent slipping when used on a desk. Unfortunately, there are no color options, and the Tappy is only available in green. It looks good, but I wish there were other options as well. There are two removable buttons, an on/off switch, and an LED indicator that displays connection mode, charging status, and more. The buttons resemble those of an old typewriter, with quite a long travel distance and a pleasant clack. In the box, you have four buttons with different icons: heart, coffee, O, and X. You can easily swap buttons by simply pulling them upwards. Tip: buttons come with plastic covers, but they are quite tricky to remove. It is hard to call the Tappy the most ergonomic remote control, but after fiddling with it for a few hours, I managed to find a comfortable hand position. Attaching a lanyard to it can make it more comfortable in use without the fear of dropping it, but unfortunately, the Tappy does not come with one. The Tappy connects via Bluetooth 5.2, and it works in three modes, which you can toggle by pressing and holding both buttons for about five seconds: Reading Mode Multimedia Mode Browsing Mode Next / Previous page Next / Previous Track Up / Down scroll If you pair the Tappy with a BOOX device (I tested it with the BOOX Go 10.5 Gen 2 Lumi), you will get small pop-ups indicating the current mode. Plus, you can customize what each button does when pressed one time, two times, or held for a few seconds. The list of available actions and features you can use is massive, and I like that BOOX lets you map stuff like brightness adjustment, app launching, screenshot-taking, screen rotating, navigation, and more. Note, however, that while you can use the Tappy with other readers, its customization is only available on BOOX devices running firmware version 4.2 and newer. I could not connect the Tappy to my computer (Windows 11 claims a driver error when I try), but it worked with the DuRoBo Krono that I recently reviewed. My Kindle Paperwhite refused to work with the Tappy, though, just like my iPhone. The Tappy uses a non-removable Li-Ion battery, which can be recharged with a Type-C cable. BOOX rates the remote for "weeks of use," and I can say that it indeed has very good battery life. While there are no battery indicators on the remote, you can see the current level in the status bar or in Input settings in the BOOX firmware. After a few days of active use, mine still shows about 95%. Overall, the Tappy left a nice impression. It is well-made, and the integration with BOOX devices is great. I also like that BOOX decided to have some fun with its design and swappable buttons. I cannot say I am a fan of its odd shape, though. Still, I managed to find a way to use it comfortably. And when not in use, it just looks neat sitting on the table doing nothing or serving you as a small clacky fidget. Buy BOOX Tappy - $29.99 on Amazon US As an Amazon Associate, we earn from qualifying purchases.
    • AdGuard Family lifetime deal now only $14.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 91% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $14.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $14.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!