Recommended Posts

While the U238 can also shield the radiation from the fusion reactions, it could make crash and weapon impact zones troublesome for some time - it's essentially the same as the depleted uranium used in artillery shells.

Boeing: call back when you figure out how to do it without the U238.

Patent....

http://www.businessinsider.com/boeing-just-patented-a-jet-engine-powered-by-lasers-and-nuclear-explosions-2015-7

Boeing just patented a jet engine powered by lasers and nuclear explosions

Last week, the US Patent and Trademark Office approved an application from Boeing's Robert Budica, James Herzberg, and Frank Chandler for a laser- and nuclear-driven airplane engine.

With airplane makers constantly on the lookout for new and more efficient ways to power their products, this laser engine is the latest idea cooked up by the engineers at Boeing.

Modern airliners such as the Boeing Dreamliner are powered by multiple turbofan engines. These engines deploy a series of fans and turbines to compress air and ignite fuel to produce thrust.

Boeing's newly patented engine provides thrust in a very different and rather novel manner. According to the patent filing, the laser engine may also be used to power rockets, missiles, and even spacecraft.

As of now, the engine lives only in patent documents. The technology is so out-there that it is unclear whether anyone will ever build it.

Here's how Boeing's new patented engine works.

Boeing's new jet engine works by firing high-power lasers at radioactive material, such as deuterium and tritium.

boeings-new-jet-engine-works-by-firing-h

The lasers vaporize the radioactive material and cause a fusion reaction

Link to comment
https://www.neowin.net/forum/topic/1263442-boeing-patents-laser-fusion-engine/
Share on other sites

Laser, nuclear material and heat combined.... who will be the guinea pig pilots to test it in an aircraft?

 

Pick me....Pick me....(hand up in the air , pumping, from a seat in the back of the room)...... :woot:

  • Like 1

If they got this functional I could see a benefit to Civilian Space flight but on regular atmospheric aircraft? i cannot begin to imagine the amount of testing and regulations the FAA and every  other Aviation authority would have to create regulating the operation and ground maintenance of such an aircraft where the engine is basically a fusion reactor.

It's going to take, minimum, 15-25 years of R&D time before we see any kind of Engineering uses from this one. A Laser-based "Flash Fusion" system like this has a lot of potential applications, certainly; but until they have a working demonstration model I'm not so sure that this will amount to anything more than a "good idea" entry for the rest of the "good ideas" pile unless it gets picked up by someone with deep pockets.

 

With the Global Economy events today (China is just the start), we likely will have more immediate concerns to deal with, sadly.

The US put the first operational nuclear reactor in the air though the craft, a modified Corvar B-36, wasn't nuclear powered: it was to test radiation shielding. Soviet Union also flew a plane for similar purposes- Tu-95LAL.

  • Like 1

If the nuclear fuel produces the thrust directly, wouldn't that mean that the nuclear fuel would have to be - at some level - exposited to the atmosphere? If so, how would this not have a nuclear contrail?

Deuterium-Tritium fusion produces Helium, I wouldn't stand behind the exhaust, but it'd be cleaner than an existing jet engine.

The only radioative material in the engine is the Uranium wall lining, in metal form it's pretty stable, you just don't want to break it up and inhale it (The Tritium fuel on the other hand would be worse for you)

There was a US nuclear powered bomber research project in the early 1950's using the B-36 airframe, but it was cancelled.

Shortly after Aviation Week ran a story about a Soviet nuclear powered bomber which had flown several times. This caused President Eisenhower to re-start the US program in the late 1950's with GE and Pratt & Whitney working on two different engine prototypes.

At the same time the US started flying the U2 spyplane and high powered spy satellites, and based on their classified data work on the nuclear powered bombers airframe was ordered to stop. Work on the nuclear engines continued.

In 1960 John Kennedy ran on the notion that Eisenhower had allowed a missile and bomber gap to develop, with Soviet production outstripping that of the US. After he won and got into the White House Kennedy discovered he was wrong;

1) the U2 and satellite data revealed the Soviet production of bombers was quite low, and their long range missile fleet was likewise smaller than expected. They were bluffing and spreading misinformation.

2) the 1950's Soviet nuclear powered bomber flights story was a hoax. A prototype airframe had been built and flown in 1961, far later than the AvWeek story had reported, but it had conventional jet engines and was mainly used to test shielding. Worse, it was very slow.

This caused the US nuclear powered bomber project to go far into the back burner, and the development of submarine launched ballistic missiles (starting with Polaris) and accurate land based missiles killed the nuclear powered bomber project.

Just my opinion.........Just did a quick read up.......seems there will not be enough material to initiate fission, but starts the process of throwing out neutrons, The chamber wall helps keep the  process going, which in fact wants to stop due to the negative feedback processes of neutron expulsion when using U238...engine output will be helium and hydrogen, non irradiated and the only "hot" item will be chamber walls for a short time.   basically a process of moving neutrons around at several energy states, excess photon production and technically, no daughter products........A turbine that uses U238 as fuel (non fission, non fusion) instead of J series fuel and actually will have a cleaner exhaust.    This is not a reactor, just an elevated temperature induced environment to produce continuous neutron generation (photon expulsion) with the exhaust being very hot helium and hydrogen......../s "fascinating"...this will work in principle..will take hand fulls of cash thrown at it....Cheers

I probably misread the article but I don't see how this is a jet engine? It's essentially a rocket as far as I can tell from the schematics above...

Compressed hot gases out the back nozzle......"jet" is loose term (poor analogy but based on premise of long duration engine use as compared to very short duration use for rockets)......due to cleaner exhaust products in lieu of toxic nasties out of rockets...take your pick for your descriptor of choice.......I would prefer..../s......turboencabulator driven single helix mutoid propulsive device (just cause it sounds cool)....... :D

 

The above diagrams are rough at that, just a descriptor...no where close to resembling true schematics. Just reading about the plumbing required for compressor/turbo driven generator makes one realize these drawings are "stick figures" to convey a complicated process with the least amount of general confusion.....Cheers

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AI will never be the jobs panacea some companies fantasize about today. Oracle is likely using it as an excuse, which we will see a lot of companies doing, I'm certain. They love their "plausible" excuses for their downturns. A couple of weeks ago my wife asked me to call Krogers about some discrepancy in a online grocery order, and it will be the last time either of us does that. I'll just do emails with humans from now on... The AI experience was horrible--the obviously recorded voice started asking a bunch of questions about our orders six months prior(!) and saying, "Is this in reference to your order on January 6, for $****?" You say "No!" and immediately the next question is "Is this in reference to your order on January 29th, for $****?" again, I answered "No!"--and it was incredible--on and on it went like that for fully 20 minutes until we finally got to the present, and only then was I put through to a human with authentic intelligence... I wondered why on Earth the idiot AI didn't start with the most recent orders and work back from there, as it was something anyone with a functioning brain would have done. And why didn't the AI have enough sense to ask me what the problem was in the first place? It didn't take too much deduction to understand that the goal of this "AI" was to cause the person on the phone to hang up in disgust, with no resolution of the problem. That begs another question: why pay for a tool-free problem line if the goal is to avoid solving your customer's problems?... Fortunately, Krogers does have real humans capable of reading an email and understanding it, and if she sees another situation in the future that's route she or I will take. The online grocery delivery service from Krogers has been great, over all, but their AI truly sucks.
    • AI is the justification that company administrators use to lay people off; it is not the end all, be all touted in the media (many of whom can't tell a microchip from a potato chip). Greed is main driving factor behind its adoption; the other is remaining relevant in the face of competition from other entities.
    • Firefox 152.0.2 is out with fixes for performance, translation, and cloud storage services by Taras Buria A new bug-fixing update is now rolling out to Firefox users in the Release Channel. Less than a week ago, Mozilla fixed crashes on Intel Raptor Lake processors with version 152.0.1. Now, Mozilla has prepared yet another set of fixes that address problems with localization, playback issues of certain MP4 files, and performance issues on website that perform various encryption operations at once. Here is the full changelog: Firefox 152.0.2 is now available for download from Mozilla's FTP. Existing installations will get the update over the next several hours. The latest version will also be available soon on the official website, the Microsoft Store, and Neowin's Software page. You can find Firefox 152.0.2 release notes in the official documentation. In case you missed it, Mozilla released Firefox 152 earlier this month. The latest feature update brought reworked settings with a more streamlined user interface, JPEG XL support, new features for Private mode, a new way to mute a tab (just type "mute" in the address bar), and many more. You can find the complete changelog here. In other Firefox news, Mozilla recently published its roadmap, where the company detailed the upcoming Nova redesign and other features it plans to implement. Mozilla wants to make the new user interface easier to navigate and more modern, with a heavy focus on its privacy tools, such as its built-in VPN. If you are curious, you can already enable the new UI as described here.
    • Liene PixCut S1 Starter Kit gets a whopping 31% discount on Prime Day by Steven Parker Liene reached out to us to share another Prime Day exclusive deal that starts today on Amazon. It gives buyers a massive 31% off on the cost of this color sticker printer and cutting machine. It's basically an all-in-one sticker maker for DIY crafts, custom labels and gifts. It utilizes thermal dye-sublimation at 300 dpi, and offers precise "AI" auto-cutting. Here are some more of its highlights: All-in-One Convenience - Print and Cut in One Step. Say goodbye to the hassle of using separate machines. The PixCut S1 seamlessly integrates high-resolution photo printing and precise die cutting into one streamlined device. With just a few clicks on the user-friendly app, you can edit, print, and cut directly from your smartphone via Bluetooth. Create stickers in just 2 minutes! This all-in-one solution saves you time and effort, making your creative projects more enjoyable and efficient. AI Image Extraction & Precision Cutting - Unleash your creativity with the AI image extraction feature that automatically recognizes and extracts subjects from your photos. Then watch as the high-precision cutting system, guided by the same AI technology, perfectly follows every edge with pinpoint accuracy. This seamless AI-to-cut workflow ensures flawless results every time. Turn any moment into custom stickers with professional edges in minutes - just masterpieces made simple. High-Resolution Prints - Vivid and True-to-Life Colors. Utilizing thermal dye-sublimation technology, the PixCut S1 delivers stunning 300 dpi high-resolution prints with 16.7 million colors. Whether you're printing photos, stickers, or labels, you can expect vibrant, true-to-life color effects that make your creations stand out. Every detail is captured with precision, providing professional-quality results every time. AI Lab - Bring Your Imagination to Life. Upload a photo, pick a style from the Liene Photo App, and watch AI bring your vision to life instantly. Turn selfies into an anime character, a fantasy hero, or a festive holiday illustration — all with stunning realism. One style, endless versions of you. Print your AI art as custom stickers, unique gifts, or social media posts — perfect for avatars and DIY projects. No design experience required. Your creativity is just one click away from magic. Durable Stickers - Create Long-Lasting Creations .Thanks to the four-layer thermal dye-sublimation technology, the photopaper is automatically laminated during printing. Stickers produced by PixCut S1 are durable, waterproof and scratch-resistant, ensuring they remain vibrant and intactover time. Perfect for creating custom stickers, labels, and more that last. No Subscription. Just Pure Creativity. With the Liene app, available on mobile, tablet, and desktop. Unlock 40,000+ free images, fonts & elements (and growing), plus 2000+ ready-to-use templates for phone skins, lens stickers, ID cards, labels, name tags, journaling, and more. No paywalls, no hidden fees, just pure creativity. Turn any idea into a custom creation in minutes. Your imagination has no limits, neither should your software. This deal is for the Starter Kit, so what do you get? What's in the box PixCut S1 Photo Sticker Printer and Cutter x 1 Photo Sticker Cutter Ink Cartridge x 1 (36 sheets) Photo Paper 4"x6" (18 sheets) Sticker Paper 4"x7" (White) x 18 sheets Blade x 1 (Pre-installed) So in short everything you need to get printing and cutting. The Liene PixCut S1 has a 4.3 star rating after more than 1,000 reviews from customers, but we can't promise the landing page always sold this particular model, so do check out the reviews before purchasing. In any case Prime members are covered with a 30 day return or replacement should things not work out so great. Liene Pixcut S1 for $205.99 (was $299.99) 31% off Use code 15PIXCUT6 during checkout Although this is a Prime Day discount, the above code will stay live until June 30. Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      481
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      102
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      70
  • Tell a friend

    Love Neowin? Tell a friend!