X1 Kinect keeps on turning off

By techbeck
in Xbox

 Share

Recommended Posts

Grand Master

TAZMINATOR

Posted
Posted

Buy a standalone kinect from the store and test it... if it has same problem.. then it could be something else in the console or whatever it is...  you can take it back for refund.

If no problems on new kinect, then your old one is damaged. You can either keep the new one or take it back. 

Not sure where you are located at but here is a link:

http://www.bestbuy.com/site/microsoft-xbox-one-kinect-sensor-black/8462033.p?id=1219336313412&skuId=8462033

Grand Master

techbeck

Posted
  • Author
Posted

So that narrows it down to these things:

A. A fan in the Kinect that isn't spinning fast enough or even at all if it isn't getting power when triggered by the temperature system, if that is even working.

B. A Kinect internal power regulator issue/fault with its other control electronics

C. Something wrong with the supply voltage and data bus on the dedicated Kinect port from the Xbox One. This we can't test for as you don't have another known working Kinect to test on your console, but is a possibility.

Ah, I love this job :)

 

Ok so a couple days ago I actually went in to settings and turned off the kinect.  I kept the kinect connected to the back of the console.  Just turned the kinect back in in settings and it power right up.  Waiting for it to go off.

Mentor

Anthony Tosie Veteran

Posted
  • Veteran
Posted

I had the same problem for several weeks before doing everything imaginable to fix it. I did a full reset (10 seconds, also resets while making sure the sleep mode isn't on), unplugged the Kinect multiple times, recalibrated it, everything. It's now been working for a month, and I'm not quite sure what fixed my problem (if it is indeed fixed) since I did so many things. Like you, I was getting the notification that the Kinect was unplugged in one of the corners of my screen (top right, I believe), and it wouldn't recognize voice prompts or display any lights whatsoever.

Grand Master

techbeck

Posted
  • Author
Posted

 

ok, so last time it disconnected I unpluged it and took some compressed and blew out the connection port on the back, the console, and the kinect.  It was a little dusty but not bad  Dust did not shoot our or anything.  It has now been on for an hour and it is still working.  Of course as soon as I post this, probably will disconnect again, 

If it does disconnect again, I am going to do a factory reset to make sure I have tried everything.  If a factory reset does not work, then I am going to get the kinect replaced.

I had the same problem for several weeks before doing everything imaginable to fix it. I did a full reset (10 seconds, also resets while making sure the sleep mode isn't on), unplugged the Kinect multiple times, recalibrated it, everything. It's now been working for a month, and I'm not quite sure what fixed my problem (if it is indeed fixed) since I did so many things. Like you, I was getting the notification that the Kinect was unplugged in one of the corners of my screen (top right, I believe), and it wouldn't recognize voice prompts or display any lights whatsoever.

Yea, what is happening to me.

Grand Master

techbeck

Posted
  • Author
Posted

Ok, when I went to bed last night, the kinect was still on and working 100 percent for 7hrs.  Normally it would shut off after 10 - 30 minutes. So maybe cleaning it out with the compressed air worked (knock on wood).  Just tried it in a whim since someone else posted that fixed their problem.  We shall see in about 9hrs or so when I get home.  Did not have a chance to test it before I left for work.

Grand Master

MikeChipshop Member

Posted
  • Member
Posted

Yea, what is happening to me.

Add me to the list too.

About four months ago mine started doing the same thing, and on random occasions would still work. 
I'll try cleaning it out later and see if it makes a difference.

Grand Master

123456789A

Posted
Posted

Mine did the same thing.  Turned off when the console was in standby.  Always did that but this is a bigger issue.  The console does not even see the connect attached.

Are you sure your power brick is ok? I had different issues but after replacing it, they went away.

Grand Master

techbeck

Posted
  • Author
Posted (edited)

 

Add me to the list too.

About four months ago mine started doing the same thing, and on random occasions would still work. 
I'll try cleaning it out later and see if it makes a difference.

May want to try the following as well if you have not.  This fixed it for a lot of people....

1) Press/hold the XBOX logo the console for 10 seconds or until the X1 turns completely off.

2) Unplug the power from the back of the console and the wall and then unplug the kinect.

3) Make sure the light on the power brick is off (this may take a min or 2) and then plug the power back in leaving the kinect disconnected.

4) Power up the X1 and then got to Settings/Kinect.  From here it will tell you to plug in your Kinect.  May take a few seconds but the Kinect should power up and you should see that it is working.

 

Also, heard reports that plugging the X1 in to a power strip will cause issues and needs to be plugged in to the wall.  People are staying that the power brick for the X1 has built in power protection.  Not sure on that really.  And not sure if cleaning it out will fix my issue either.  Just saw a couple reports that it did.  If it is working when I get home in several hours, that is a good sign.

Grand Master

techbeck

Posted
  • Author
Posted

Are you sure your power brick is ok? I had different issues but after replacing it, they went away.

What issues were you having?  Everything else on the X1 works just fine and from what I have been seeing the past 2 years worth of posts, never was it mentioned that the power brick could be the cause of the kinect issues.  Not saying it couldnt be and is something to check if all else fails.

Grand Master

123456789A

Posted
Posted

What issues were you having?  Everything else on the X1 works just fine and from what I have been seeing the past 2 years worth of posts, never was it mentioned that the power brick could be the cause of the kinect issues.  Not saying it couldnt be and is something to check if all else fails.

I was having connectivity issues, like the controllers would disconnect and wifi would drop out all the time.

Mentor

Tidosho

Posted
Posted

People are staying that the power brick for the X1 has built in power protection.  Not sure on that really.  And not sure if cleaning it out will fix my issue either.  Just saw a couple reports that it did.  If it is working when I get home in several hours, that is a good sign.

It's a switchmode supply, they have overvoltage, undervoltage, and surge protection up to 4000V. There's also a fan and heatsink in it too, so cleaning it out will help.

As with a PC, a dodgy PSU can cause all sorts of weird issues. If the output is fluctuating because the internal regulation is dodgy you'll notice it when the console's under moderate load. They're really good supplies though, a LOT better than the ones in the PS4. The reason MS kept them external all this time is because they're really advanced microcontrolled supplies, whereas Sony have to keep the size down to keep it internal.

Grand Master

MikeChipshop Member

Posted
  • Member
Posted

May want to try the following as well if you have not.  This fixed it for a lot of people....

1) Press/hold the XBOX logo the console for 10 seconds or until the X1 turns completely off.

2) Unplug the power from the back of the console and the wall and then unplug the kinect.

3) Make sure the light on the power brick is off (this may take a min or 2) and then plug the power back in leaving the kinect disconnected.

4) Power up the X1 and then got to Settings/Kinect.  From here it will tell you to plug in your Kinect.  May take a few seconds but the Kinect should power up and you should see that it is working.

 

Also, heard reports that plugging the X1 in to a power strip will cause issues and needs to be plugged in to the wall.  People are staying that the power brick for the X1 has built in power protection.  Not sure on that really.  And not sure if cleaning it out will fix my issue either.  Just saw a couple reports that it did.  If it is working when I get home in several hours, that is a good sign.

That first list is one of the things i first tried, to no avail. Pretty much tried everything you have to except cleaning it out.
I'm not sure on the power strip thing, i'll have a look when i'm home as i can;t remember if it's directly plugged in to the wall or an extension.

One thing i was pondering was damaged cabling, or cable interference. I used to help build recording studios and found a huge amount of issues with cable cross talk. Maybe the mass of cables behind my TV isn't helping? I'll have a sort out later.

Grand Master

techbeck

Posted
  • Author
Posted

Well, 48hrs and it worked perfectly and then turned off again.  So did a factory reset and now I am watching it turn off, on, off, on, off, on.  Cycled like that 4 times in the past 5min.  So I will probably put in a request to get it replaced in the next day or so.  Sucks but I have exhausted all my options.

Grand Master

SnoopZ

Posted
Posted

Well, 48hrs and it worked perfectly and then turned off again.  So did a factory reset and now I am watching it turn off, on, off, on, off, on.  Cycled like that 4 times in the past 5min.  So I will probably put in a request to get it replaced in the next day or so.  Sucks but I have exhausted all my options.

Can you try it on someone elses Xbox One and try theirs on yours incase it is the Xbox itself that has gone ###### up?

Grand Master

techbeck

Posted
  • Author
Posted

Can you try it on someone elses Xbox One and try theirs on yours incase it is the Xbox itself that has gone ###### up?

Unless someone wants to send me their kinect, I dont know anyone close to me that has one I can use to test.  But everything I have read over the reports the past couple years on this issue states it is the kinect, not the console.  Its a well known issue.

Oddly enough, after it power on and off several times, it is now been on or over an hour.

Grand Master

techbeck

Posted
  • Author
Posted

Well, this topic apparently jinxed me. After about a month of it working with no problems, it's now gone back to not working until I unplug and plug it back in several times (if lucky

Sucks.  What is odd is mine went from going off every 10 min after a hard reset, to every 2 days.  Like clockwork.  I may be borrowing a kinect for a few days from a coworkers son and hopefully I can to test and make sure it is the kinect.  If i get another kinect to test with, will report results back here.  Otherwise, going to bite the bullet and get it exchanged for $70 and hope that is the problem.

Grand Master

techbeck

Posted
  • Author
Posted

So, no luck in borrowing another kinect.  Think i am going to wait for another update or to see if I get in to the preview program before I replace it.  Still seems to stay off for 2 days, then go off.  What is odd is that it has been off the past couple of days and just turned back on last night.  Fun fun fun

Grand Master

techbeck

Posted
  • Author
Posted

Appears to be working better after the 9/9/15 update.  Tho it doesnt look like the updated had anything to do with it  Been on a lot more lately.  Making me think it is a software issue.  Going to wait to get the kinect replaced.  Weird tho.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Posts

    • Hi my name is Olivia and I am from Australia

      By Jim K · Posted

      ...but you're Johnny, from Australia?    
    • Glow 26.9

      By Copernic · Posted

      Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DWARF mini review: the world's smallest smart telescope for night and day sky captures

      By Steven P. · Posted

      DWARF mini review: the world's smallest smart telescope for night and day sky captures by Steven Parker DWARFLAB reached out to me asking if I was interested in checking out the DWARF mini, which is a portable astronomy telescope designed for amateur astronomers. Why do I say it's for amateurs? Well, for starters, it's not what you'd call "high end"; it's more of a professional-grade starting point for amateurs serious about capturing what's up there in our night and day skies. A typical amateur astronomer is most likely thousands of dollars deep into the hobby, and I will make no claims that this DWARF mini (at a fraction of the cost) could replace it all, okay? Well, if you read on, it will be clearer what I am trying to convey. Disclosure: DWARFLAB provided a free sample without any editorial input or review pre-approval. I have always been interested in looking up and observing the night sky. I see satellites crossing the sky above my garden most nights, and I am always looking at the moon. Yeah, I have a 200MP camera on my phone, but at 200X zoom, AI takes over and makes the pretty moon pictures that I snap, the DWARF mini does not, you get an actual true picture of what you can barely see with the naked eye. Before we start, let's share the highlights of the DWARF mini in bite-sized format: Pocket-Sized & Ultra-Lightweight Weighing just 1.85 lbs (840g), the DWARF mini easily fits into a backpack or large pocket. Its all-in-one, compact design makes it the ultimate grab-and-go digital telescope for hiking, camping, or traveling to dark-sky locations. Intuitive App Control & Built-in Sky Atlas Go from unboxing to your first shot in just 3 minutes! The DWARFLAB App provides a seamless experience with an interactive star map. Simply select your target and start exploring without the steep learning curve of traditional setups. Auto GOTO & 360° Pivot Freedom Enjoy pinpoint automated tracking with full 360° rotation. Powered by a high-sensitivity Sony IMX662 sensor (1/2.8-inch, 2.9μm pixels), it captures amazing, low-noise astro details, bringing faint nebulas and star clusters to life with stunning clarity. Pro-Level EQ Mode & Long Exposure Unlock advanced deep-space imaging with Equatorial (EQ) Mode. Supporting impressive single-frame exposures up to 90 seconds and featuring built-in light pollution filters, it easily cuts through city glow to reveal intricate celestial structures. Smart Cloud Processing & All-Ages Fun Effortlessly enhance your raw data with integrated cloud processing for professional-grade results. Perfect for beginners, kids, and adults, this telescope makes exploring and sharing the wonders of the universe an exciting, family-friendly adventure. The packaging is a pretty minimal affair with the outer box opening like a flap to reveal the plastic mould of the DWARF mini sitting in it. Below, the Sun filter, charging cable, cleaning cloth, and documentation can be found. DWARFLAB also provided a Mini Hydraulic Tripod ($89.99), and I highly recommend getting it if you plan on purchasing the DWARF mini, as it fully supports the motorized tracking feature of the telescope; plus, at 840g, the weight of the telescope, you will need a tripod that supports more than the weight of a smartphone anyway. What's in the box DWARF Mini Smart Telescope × 1 Sun Filter x 1 Type-C to Type-C Cord x 1 Cleaning Cloth x 1 User Guide With that out of the way, here are the full specs: DWARF mini Dimensions (DWH): 60.70 mm x 100.38 × 183.61 (2.39" x 3.95" x 7.23") Weight: 840g (1.85lbs) Aperture diameter: 30 mm (telephoto), 3.4 mm (wide angle) Image Sensor: SONY IMX662 1/2.8" (Telephoto) OmniVision OS02K10 1/2.8" (Wide-angle) Focal length: 150 mm (telephoto), 6.7 mm (wide-angle) Equivalent focal length: 1016 mm (telephoto), 45 mm (wide-angle) Shutter Speed: Tele - 1/10000-90s, Wide - 1/10000-30s Maximum exposure time: 90s (telephoto & wide-angle), Both in EQ mode Rotation range: Lens: 225°, Base: 360° Effective Pixels: 2.07M Maximum Resolution: 1920 × 1080 (Telephoto & Wide-angle) Built-in filters: Astro, Dark, Duo-Band (Telephoto), Astro (Wide-angle) Output: JPG, FITS, TIFF, MP4 Shooting Mode: Photos, Videos, Astronomy, Burst Shooting, Time-lapse Photography Storage: 64 GB Battery: Built-in 7000 mAh, supports external USB charging Charging Port: Type-C NPU: 1 TOPS Features: WiFi, NFC NFC One-Touch Connection Astronomy Post-Processing/Appointment Shooting/Astronomy Mosaic Wi-Fi Transmission Range: 15m (open environment) Color: Black Compatibility: iOS & Android smartphones/tablets Warranty: 2-years (24-months) MSRP: $399 Design Charge port On/off button Lens On the DWARF mini itself, it is a pretty minimal affair. On one side, there is a Type-C USB port to charge the non-removable 7000 mAh battery, and on the other side, a large button to power on or off the telescope. The button is flanked by an LED that is green when connected via the DWARFLAB app, or lights up red when being powered off. Below the button, there are four LEDs that indicate battery power. The DWARF mini does not have any sharp edges as all sides are rounded off; it has a good heft to it, but the weight of it feels quite balanced in the hand, so it isn't top or bottom-heavy. On the front there is the DWARFLAB logo which is quite small and there are no other markings on it. The tripod offers full 360° rotation of the motorized base, which allows for tracking for the time-lapse mode, but also for the 90-second captures of nearer objects in the sky, such as the Sun or the moon. Usage To get started, simply power on the DWARF mini and open the DWARFLAB app, tap on Connect, and it will scan for the DWARF mini over the Wi-Fi network. The device supports both 2.4 GHz and 5 GHz Wi-Fi, as well as Bluetooth for discovery, so connection issues were minimal in my experience with it. As previously noted in the specs, the DWARF mini will stay connected with a phone or tablet up to 15 meters in an open environment, such as a backyard. Lighting status Powering on: The green circular light will rotate and breathe in turn Powering off: The red circular light is gradually extinguished Connecting: Green light strip rotating Connected: Green light strip solid/always on 4 lights 1= 0-25%, 2= 25-50%, 3= 50-75%, 4= 75-100% battery power To view the full lighting status, such as tracking mode and connection failure, you can check the user guide on the official DWARFLAB page. DWARFLAB app Above, you can see the steps undertaken to connect the DWARFLAB app to my Galaxy S26 Ultra. Weirdly, I got an alert that a firmware update failed to get uploaded to the DWARF mini the first time, but upon retrying, it worked. Then place the DWARF mini outside, make sure your smartphone or tablet is connected to it, and then head back inside, because you can manage it from the comfort of your home. Simply enter the Atlas tab in the app and search for what you want to capture, and then tap on the camera icon; the DWARF mini will then attempt to track the object and give you a live view right on your connected device. Results I've had the DWARF mini since April, but even though my garden is south-facing, I had a lot of trouble trying to capture a good image of the moon. In the end, it was possible after I took it with me on a trip to my parents in Southend, UK, at the end of May. Here is a capture of the moon, resulting from 20 stacked images over a 90-second exposure. What you are seeing here is not AI-assisted. A good example of what I mean is the latest flagships with their 200MP cameras claiming to capture things like closeups of the moon, and while they are not as good as the above example on the DWARF mini, the resulting image on smartphones is actually AI-assisted above 30X zoom. Here is an example of a similar shot at the moon at 200X zoom using an HONOR Magic8 Pro. The difference is clear. Next, here we have a shot of the daytime moon. Here is a shot of Arcturus, the red giant star, which is the fourth brightest in the night sky. As previously mentioned, it could be a bit clearer, but clouds passing in front of it muddied the shot a bit. The Sun The DWARF mini also ships with a sun filter, meaning you can take great shots of the sun as well. Tracking Sun Resulting (stacked) shot Live zoom The pictures themselves are limited to Full HD, and some of the examples actually came out in HD (1280x720), but this is because the standard telescopic result is in 720p while "Wide" is in 1080p. Above you can see how in the app the Sun is tracked, the resulting capture, and Live zoom. I have only scratched the surface of what is possible with this telescope; I found several examples online of shots of the Milky Way, among others, such as nebulae and galaxies. All of this requires patience and knowledge, although if you know what you are looking for, simply enter it in the Atlas tab in the DWARFLAB app, tap the camera icon, and the telescope will attempt to track it. Conclusion The good The DWARF mini definitely places itself in a price point that makes astrology accessible to anyone looking to get started in the hobby. Say you want to have a closer look at the moon, simply enter it in the Atlas, and the Live view also lets you zoom in and snap pictures. The bad Some issues I came across while operating the DWARF mini were that it sometimes failed to connect unless I held my smartphone right next to it, and finding and tracking sometimes took several attempts to get it calibrated. I discovered that it helped if I sort of positioned and pointed the telescope in the general area it was supposed to detect, but this obviously wouldn't work with objects you can't see with the naked eye; more testing is required for that. Another bit of advice is to ensure that the lens is clean. While making the examples of live zooming on the sun, I discovered that the telescope lens and sun filter were not completely clean, and only after cleaning with a microfiber cloth was I able to get a decent shot of the sun. Where to buy and a coupon Okay, $399 is not cheap for a side hobby, but nor is a $1,500 smartphone flagship that you'll most likely have for a couple of years. This is a one-time entrance into astrology, and it won't become obsolete in one year like a smartphone. It's a thumbs up from me. The DWARF mini is available to buy right now in the U.S. and U.K. at the links below. DWARF mini for $399 on the official site DWARF mini for $399 on Amazon U.S. Use the NEOWIN5OFF coupon code for an additional 5% off at checkout (expires June 21) As an Amazon Associate, I earn from qualifying purchases.
    • Adobe Acrobat Reader DC 2026.001.21651

      By Mindovermaster · Posted

      Adobe Acrobat Reader Dis Continued
    • An actual cosmic "Eye of Sauron" had been looking straight at us all along

      By ZipZapRap · Posted

      The name, you mean? If so, it's actually the objects common name. There's another one called NGC 7293 which is also known as Helix Nebula (because we're looking at a helix structure top down) but other times also known as the Eye of God. You'll understand when you see it

  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done

  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      271
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      71
    5. 5
      FloatingFatMan
      69
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!