X1 Kinect keeps on turning off


Recommended Posts

Add me to this list as well.

Same issue(s) as techbeck.

My 1st XBO did this for many months, across many software updates. Never corrected itself and nothing I tried corrected it.

Bought my 2nd XBO (refurbished / certified) and as of last week it's doing the exact thing my first one did. This 2nd XBO has never been plugged into a power strip/surge protector.

On my 1st XBO I went around and around with xbox support and they seemed dumbfounded by the issue as if they never heard about it before.

Anyway, my 2 cents. I'm going to try a few more things that you pointed out, techbeck, and see how it goes. Namely, blowing out the kinect ports.

Quick update.

I'm on the new dashboard experience, and lo and behold, my Kinect is running and operating absolutely fine. Hasn't turned itself off since the update came through (early August) and actually responds to my girlfriends voice now, something it never did before.

Quick update.

I'm on the new dashboard experience, and lo and behold, my Kinect is running and operating absolutely fine. Hasn't turned itself off since the update came through (early August) and actually responds to my girlfriends voice now, something it never did before.

Good to hear.  Was hoping to get an invite to the dashboard experience but still have not.

Shall see if I get in.  Is there a site that lists all the current issues?

I just look through the 'Known Issues' section of the preview dashboard.

Actually having major issues with this last night while trying to watch TV. I use the Xbox USB TV Receiver, and last night it was going haywire.
I rewound a section of a program and it jumped 30 minutes back, and then i couldn't change channels or fast forward to my original place. OneGuide has been playing silly buggers with ignoring the Tuner, not updating the details or just having the plain wrong time and listings in place. The box also hard crashed 3 times!

I'm not complaining of course, it's what i signed up for, and i've been reporting bugs constantly. Despite all this, i do think it'll be a genuinely good upgrade once it's iron out. It's a far bigger update than even the 360's was when it went to the new experience, and it's pretty clear it's going to be well worth the effort and bugs in the long run.

 

Just a heads up ;)

  • 2 months later...

check if you got too much strain on the kinect cable sometimes that can cause the kinect to malfunction and may or will be needed to be replaced i recommend at lest foot of slack at the kinect if you use a kinect TV/wall/floor stand mount zip tie the cable to mount with six inch of slack max or you can try to force update kinect by power off x1 unplug kinect power on x1 plug kinect then turn off kinect and launch Xbox fitness which is free on turn it on via the game and that will force update the kinect i know the force update works i am a ms partner(i do not work for Microsoft i repeat i do not work for Microsoft) and a preferred test concept pre-alpha alpha bate tester of windows OS Xbox OS office and games for many other company's and don't ask me what games i test i singed a NDA

4 hours ago, techbeck said:

I had tried everything.  Works for a few days after a hard reset, but then craps out.  Will eventually get it replaced.

Same. Funny thing was, it worked fine during the new experience preview, and as soon as that went gold, the Kinect broke again.

  • 2 months later...

Fixed! For about 8 months I have had to unplug my xb1 in order to get my Kinect to come on for a day or two. A few weeks ago I unplugged EVERYTHING and took my xb1 and Kinect to my garage where I used my air compressor at about 75psi to blow out the xb1 and Kinect. After plugging everything back in and powering on I have had full use of the Kinect without any need to unplug or hard reset. I'm thinking dust build up within the systems is causing an overheat / shutdown condition. If things stop working in the near future I will be sure to inform everyone, but as of now it's all working as advertised. If you don't have an air compressor you might be able to use a can of air but not sure it will have enough psi to get the job done. Worth a shot though. 

Edited by Cmadd78
  • 1 month later...
On March 3, 2016 at 10:11 PM, Cmadd78 said:

Fixed! For about 8 months I have had to unplug my xb1 in order to get my Kinect to come on for a day or two. A few weeks ago I unplugged EVERYTHING and took my xb1 and Kinect to my garage where I used my air compressor at about 75psi to blow out the xb1 and Kinect. After plugging everything back in and powering on I have had full use of the Kinect without any need to unplug or hard reset. I'm thinking dust build up within the systems is causing an overheat / shutdown condition. If things stop working in the near future I will be sure to inform everyone, but as of now it's all working as advertised. If you don't have an air compressor you might be able to use a can of air but not sure it will have enough psi to get the job done. Worth a shot though. 

Hey everyone! So...as I mentioned...I had my XBONE Kinect working in March...guess what...quit working again...go figure. I now have it working again....here is the new plan of action. Mind you...if you attempt this fix you will need a bit of soldering and understanding of mechanical working knowledge. I hold no responsibility if you attempt this fix and it does not work or causes damage. With that being said...I disassembled my Kinect and found my fan no longer working. I had a small CPU fan that I removed and rewired for use on the Kinect. I did not use the yellow wire on the Kinect...I simply wired the black, red, and blue wires on the fan to the old connector for the bad Kinect fan. Mind you the Kinect fan is 5vdc and the cpu fan is 12vdc, but all seems to be working fine. The fan runs 24/7 now. Due to the larger size of the cpu fan I had to use black duct tape to secure it to the back of the Kinect. No problems anymore and this seems to have taken care of the issue once more. If you have any questions or need to see pictures of the work please feel free to reply and I will get back with you as soon as possible. This is the cheap way to go...and you need some soldering skills to do it. I did find some replacement fans from China for about $15 if you just want to go with a replacement instead (I didn't want to wait a month for it to arrive). Long story short...it's a cooling issue causing these Kinect sensors to fail. Thanks Microsoft! 

  • 2 months later...
On 01/05/2016 at 3:28 AM, Cmadd78 said:

Hey everyone! So...as I mentioned...I had my XBONE Kinect working in March...guess what...quit working again...go figure. I now have it working again....here is the new plan of action. Mind you...if you attempt this fix you will need a bit of soldering and understanding of mechanical working knowledge. I hold no responsibility if you attempt this fix and it does not work or causes damage. With that being said...I disassembled my Kinect and found my fan no longer working. I had a small CPU fan that I removed and rewired for use on the Kinect. I did not use the yellow wire on the Kinect...I simply wired the black, red, and blue wires on the fan to the old connector for the bad Kinect fan. Mind you the Kinect fan is 5vdc and the cpu fan is 12vdc, but all seems to be working fine. The fan runs 24/7 now. Due to the larger size of the cpu fan I had to use black duct tape to secure it to the back of the Kinect. No problems anymore and this seems to have taken care of the issue once more. If you have any questions or need to see pictures of the work please feel free to reply and I will get back with you as soon as possible. This is the cheap way to go...and you need some soldering skills to do it. I did find some replacement fans from China for about $15 if you just want to go with a replacement instead (I didn't want to wait a month for it to arrive). Long story short...it's a cooling issue causing these Kinect sensors to fail. Thanks Microsoft! 

 

Thru comes out today and i really want to play it, so i'm thinking of heading down this route. Got plenty of old cpu fans knocking around. Will report back!

 

Edit: I'm in! The cooling fan is stuck solid. That'll be the issue then :p

 

 

  • 3 weeks later...

So, after the latest update for the X1 which includes Cortana....Kinect started working again.  Apparently I got the update today while at work.  Turned on the X1 and Kinect made the noise like it was starting up.   Normally I have to do a hard reset in order for it to work an hour or so.  But when the update was applied, the system soft reset. I was able to turn on the X1 using my remote instead of pressing the button in the console itself which you normally have to do with a hard reset.  Voice commands are working no problem.

 

Anywho, to early to say if it will continue to work.  If so, it was a software issue all along and will not be happy if MS sat on the issue for so long.  Even if it is "fixed"

 

Will report later.  Hopefully it keeps working.

  • Like 1

Ironically mine went off again once the full update was released. I'm not going to blame the update as i left the back off the Kinect just in case and i can clearly see the new fan is jammed again. Bad solder job on my part me thinks, will have to sort it though as Fru is a lot of fun.

I have the same issue. I always have to unplug and replug to get it working. I thought the new update would fix the issue. After 4 days it turn off and have to do the unplug and replug to get it working again. Don't know this issue keeps happening but getting tired of this which I use everyday because my Xbox is my media center.

Stopped working again.  Finally said ###### it and bought a new one.  Impulse buy kinda but was getting ###### off when it started to work for a few days and I got use to the voice commands.  Price for a new connect is a little under $100 now so really not to bad considering I plan on keeping this console for a while. I plan on buying the new/more powerful X1 when released next year...but will keep my day one edition as a extra device.

  • 2 weeks later...

Been a few weeks and the new Kinect is working perfect.  Has not turned off or not issues at all.  Price for a new Kinect was about $150 but now they are around $100.  You can get an opened box or refurb for $70...but the extra $30 is worth it for me since it is a new device.

  • 1 month later...

I tried every solution on offer and nothing. But to end a sad tale with great news. I found it was to do with the XBOX ONES power settings. If you have it on power saver mode kinnects keeps turning off bit if you set it to instant on Kinnects stays going and hasn't turned off in a week since I did it. So ignore all the other solutions and just change to instant on.

14 hours ago, TimboNZ said:

I tried every solution on offer and nothing. But to end a sad tale with great news. I found it was to do with the XBOX ONES power settings. If you have it on power saver mode kinnects keeps turning off bit if you set it to instant on Kinnects stays going and hasn't turned off in a week since I did it. So ignore all the other solutions and just change to instant on.

 

 

14 hours ago, TimboNZ said:

I tried every solution on offer and nothing. But to end a sad tale with great news. I found it was to do with the XBOX ONES power settings. If you have it on power saver mode kinnects keeps turning off bit if you set it to instant on Kinnects stays going and hasn't turned off in a week since I did it. So ignore all the other solutions and just change to instant on.

 

Instant On does not fix the issue for me.

  • 3 weeks later...
  • 3 weeks later...
This topic is now closed to further replies.
  • Posts

    • AMD RX 9070 GRE AI, Blender benchmarks vs 9070 XT, 7800XT, Nvidia RTX 5070, 4070 by Sayan Sen Earlier this week, we shared the first part of our review of AMD's new RX 9070 GRE. It was about the gaming performance of the GPU, and we gave it an 8 out of 10. As a follow-up, similar to how we did with the 9070 XT and non-XT, we are doing a dedicated productivity review for the RX 9070 GRE as well, where we compare it against the 9070 XT, 9070, 7800 XT, as well as Nvidia's 5070 and 4070. This will include AI, rendering, compute, and more benchmarks. AI performance, especially, is a very important metric in today's world, and AMD also promised big improvements thanks to its underlying architectural improvements. We will be pitching it against the data we already have for the RX 9070, and RX 9070 XT, but also the Nvidia 5070 FE, MSI GeForce RTX 4070 VENTUS 2X 12G, and Gigabyte Radeon RX 7800 XT GAMING OC 16G as they are in a similar price class, but also because we do not have a comparable 5060 Ti card lying around here that we can compare it against. Before we get underway, this is a collaboration between Sayan Sen and Steven Parker, who lent me his test bed. Also, there was no editorial input from AMD. First up, the specs of the RX 9070, 9070 XT, and 9070 GRE, which were given to us by AMD: Radeon RX 9070 GRE Radeon RX 9070 Radeon RX 9070 XT Boost Clock: Game Clock: up to 2.79GHz up to 2.20GHz up to 2.52GHz up to 2.07GHz up to 2.97GHz up to 2.40GHz Stream Processors 3,072 (48 CU) 3,584 (56 CU) 4,096 (64 CU) Ray Accelerator 48 56 64 AI Accelerator 96 112 128 ROPs 96 128 Texture Mapping Units 192 224 256 Memory 12 GB GDDR6, 18Gbps Clock, 192-bit Bus 432 GB/s 16 GB GDDR6, 20Gbps Clock, 256-bit Bus Effective Memory Bandwidth: 640 GB/s Infinity Cache 48 MB (3rd Gen) 64 MB (3rd Gen) Card Bus PCI-E 5.0 X16 Output 2x HDMI 2.1b 2x DisplayPort 2.1a Power consumption 220W 304W Recommended PSU 650W 750W Slot width 2x 3x Price (SEP) $549 $599 As you can see from the specs above, it is less than the standard RX 9070 in every way that counts, except for slightly higher Boost and Game clock speed. Design Moving on, the RX 9070 GRE we were given is an XFX Swift triple-fan, dual-slot design with two 8-pin connectors. At 30cm (self-measured), it will fit in most systems easily. There is no RGB either. The AMD Radeon RX 9070 GRE by XFX from all angles. Test system Our test system consists of the following: Lian Li O11 Dynamic Mini V2 Flow (Amazon|Newegg) ASUS Z890 ProArt Creator WiFi (Amazon|Newegg) Intel Core Ultra 7 270K Plus (Amazon|Newegg) Thermal Grizzly KryoSheet - 44x37 (Amazon|Newegg) 2x 16GB G.Skill Trident Z5 RGB (7200 MT/s in XMP) (Amazon|Newegg) Sabrent Rocket4 Plus 2TB SSD (Amazon) Windows 11 25H2 (Build 26200.8246) AMD shared a press driver based on the recently released Adrenaline 26.5.2 that we were required to use. We now move on to our benchmarks. First up, we have Geekbench AI running on ONNX. For some reason, the 9070 GRE does exceptionally well here in both half-precision (FP16) and single-precision (FP32). It manages to beat the RTX 5070 and RX 9070 non-XT, and is only behind the 9070 XT. Since Geekbench runs in short bursts instead of continuously hammering the graphics card, it seems the GRE's faster boost clocks are helping here. Next up, we move to the UL Procyon AI test suite, starting with the image generation benchmark. We chose the Stable Diffusion XL FP16 test since it is the most intense workload available on Procyon. The Nvidia cards do very well here, as even the 4070 out-muscles AMD's best fairy easily. The positive thing about the GRE is that it gets quite close to the 9070 non-XT in this test; this indicates that the VRAM does not play a very big role here, as SD XL relies on float16 (FP16). So this is something to keep in mind again. If you wish to work with float32 AI workloads, graphics cards with larger than 12 GB buffers would likely emerge as victors. Regardless, the gains are still massive on AMD's 9000 series compared to the 7000 series. Following image generation, we move to the text generation benchmark. This is one test where the 9070 GRE struggled, quite a lot. It seems that the 12 GB VRAM and lower memory bandwidth of the new Radeon 9070 GRE are hurting it quite a bit; the split is massive, especially in a test like Llama2, which packs 13 billion parameters. As such, in all the tests, the 9070 GRE is the slowest of the lot. Next, we tried Blender, and here the AMD GPUs were beaten by Nvidia. Rendering is something the Green team has always had a lead over the Red side, and it has not changed so far. On the positive side, though, the 9070 GRE shows significantly better results than the 7800 XT, which means AMD is on the right path. Catching up to Nvidia, though, will require a lot more effort. And we hope HIP and ROCm can keep improving. Wrapping up AI testing, we measured OpenCL throughput in the Geekbench compute benchmark. The RX 9070 GRE alongside the 9070 did not fare well here at all, even falling behind the 7800 XT. Interestingly, even the RTX 5070 could not beat the 4070 on OpenCL, so perhaps this suggests that OpenCL optimization may not have been a priority for either AMD or Nvidia in the modern era. Conclusion We reached the end of our productivity performance review of the 9070 GRE, and we have to say it's a mixed bag. Unlike the 9070 and 9070 XT, the GRE excels in some areas while losing ground fairly easily in others. Similar to how it happened in gaming, any time the card's memory subsystem gets hammered, it tends to fall behind the others. This was the case with text generation, wherein we saw the VRAM sometimes hit its maximum available 12 GB of usage with larger model sizes. So what do we make of the RX 9070 as a productivity hardware? It can certainly be used, but you have to know it has its limitations. For those looking for a GPU that can deal with more, AMD recently unveiled the Radeon AI PRO R9700, which is essentially a 32 GB refresh of the 9070 XT with some additional workstation-based optimizations. On a similar note, the new Ryzen AI Halo platform is something you can consider if you want to set up a local AI processing station. Considering everything, we rate AMD's Radeon RX 9070 GRE a 7.5 out of 10 for its productivity performance. Price is less of a factor for those looking at productivity cases compared to those considering the GPU for gaming, and as such, we felt it did quite decently on many occasions and can be handy if you need a 12 GB GPU and, for some reason, don't want to get Nvidia. Purchase links: RX 9070 / XT / GRE (Amazon US) As an Amazon Associate, we earn from qualifying purchases.
    • Does anyone here know if these updates are integrated into the UUP dump isos?
    • Motrix Next 3.9.4 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.4 changelog: Motrix Next 3.9.4 promotes the 3.9.4 beta cycle to stable. This release refreshes bundled engine binaries, improves task detail readability and copy actions, expands link handling for magnet and ED2K workflows, polishes responsive navigation and text wrapping, updates browser extension documentation, and refines network preference controls. New Features Task Detail copy actions — Added copyable values for task metadata and reusable render functions for long text fields. Magnet and ED2K lifecycle support — Added task lifecycle handling for magnet and ED2K links. History cleanup for deleted tasks — Deleted tasks can now remove matching history records. User-Agent management — Added user-agent management and improved related network preference controls. Browser extension documentation — Added the Firefox Add-ons link for the Motrix Next extension. Improvements Engine binaries — Updated bundled binaries for supported architectures. Task Detail readability — Long task names, URLs, tracker values, and copyable metadata now render more clearly. Deletion messaging — Refined localized task deletion text for clarity and consistency. Text wrapping — Improved URI input wrapping and task name multiline display. Navigation layout — Improved sub-navigation responsiveness. Disk allocation default — Changed the default file allocation method to trunc. Proxy controls — Improved proxy button styling in network preferences. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • NVIDIA officially supports Ubuntu, as linked above with the GeForce NOW Hands on I did in collaboration with Paul Hill.
    • TO be clear I am not running linux today, however I keep thinking about it. And I want to make sure there are minimal obstacles if I decide to make that switch in the coming months.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      69
    5. 5
      FloatingFatMan
      67
  • Tell a friend

    Love Neowin? Tell a friend!