Is it worth buying a PS4 just for The Last of Us ?

By max22
in PlayStation

 Share

Recommended Posts

Grand Master

MikeChipshop Member

Posted
  • Member
Posted

In all honesty, i doubt it'll just be for that one game. If it was, then i'd say no, because you'd effectively be paying near the £500 mark for a game.

The PS4 is way more than just that, so if that game sparks your interest, then might be worth picking one up.

Veteran

madd-hatter

Posted
Posted

The PS4 is an excellent console. I personally wouldn't recommend a console for one title, but if there are other titles you will play as well, why not?

The real questions are how much to you want to play The Last of Us and can you wait until Black Friday?

Grand Master

Nick H. Supervisor

Posted
  • Supervisor
Posted

Is it worth buying "The Last of Us"? Yes.

Is it worth buying a PS4 if you've already played "The Last of Us" on the PS3? No.

Is it worth buying a PS4 so that you can play "The Last of Us" as well as other games that are exclusive to Playstation? Not sure/personal preference.

I'm going to get a PS4 for several games. "The Last of Us" isn't a selling point for me because I already played it on the PS3, and it's the story that's worth playing for, not the graphics.

Grand Master

Jason S. Global Moderator

Posted
  • Global Moderator
Posted

OP - can you tell us if you've already played the game or not? if you've already played it then, no, it's not worth buying a PS4.

I love the PS4. Already so many great games. You can always find a Sony Refurb or some special deal. i've seen new bundles for $300USD already.

Veteran

max22

Posted
  • Author
Posted

OP - can you tell us if you've already played the game or not? if you've already played it then, no, it's not worth buying a PS4.

I love the PS4. Already so many great games. You can always find a Sony Refurb or some special deal. i've seen new bundles for $300USD already.

No I haven't played the game yet just seen YouTube footage.

Veteran

+Asmodai MVC

Posted
  • MVC
Posted

I would say no.

First because I didn't even like the game, rofl.  But that's just because I'm not a fan of the genre in general not anything wrong with the game itself.

Really though it's odd to buy a current-gen system for a single game, especially a remaster of a last-gen game.  If you already have a PS3 then just get it for that.  The graphics are worse but it's essentially the same game.  If you don't have either and you really just want to play that one game it would still be cheaper to grab a PS3 and the PS3 version.  Heck i don't know if it's on PS Now but your TV or something might be able to play it without buying a console at all if you can rent it from there.

I like my PS4, I'm very happy with it but if you really don't want it for anything but one game then I'd at least make sure it's a game that only runs on that system and not a remake of a prior-gen game.

Grand Master

Nick H. Supervisor

Posted
  • Supervisor
Posted (edited)

 

No I haven't played the game yet just seen YouTube footage.

I need to agree with the others on this. I'm all for playing a game yourself, but something that is all about the storyline needs to be done one of two ways - play it or watch it. If you're already watching the story, all you're missing is the somewhat heart-pounding moments where you need to decide if now is the time to move or not. The story doesn't change, and that's the reason to play the game (in my mind, at least.) A similar - yet different - example would be Spec Ops: The Line.

  • President Devil
  • Like 1
Grand Master

+Audioboxer Subscriber²

Posted
  • Subscriber²
Posted (edited)

The Last of Us is one of the best stories in gaming. TLoU > Uncharted as well. It plays so much better in 60FPS. Considering every purchase of a PS4 in America comes with a TLoU download code you'll get it thrown in. Very unlikely you'll only ever play TLoU once you own a PS4.

The real question is can you afford the disposable cash on a PS4. If so and you want to play it go ahead. It's a crime not to have played TLoU (looking at you Andy), but nothing is worth paying for if it's possible your money could be better used elsewhere.

  • DrunknMunky
  • Like 1
Grand Master

Hedon

Posted
Posted

I would not buy a PS4 just to play The Last of Us. Now if you are excited about playing the game as well as other games, then yes. But not for that one game. It's a good game, but not worth buying a console for.

Grand Master

+Eternal Tempest MVC

Posted
  • MVC
Posted

IMHO, a game console may not be worth it for just one game, generally speaking.

That being said I jumped on the PS1 because of Final Fantasy 7 back in the day.

It's an amazing game, as long as you have other games in the pipeline to get / waiting for, then yes, maybe?
 

 

 

Grand Master

DirtyLarry Veteran

Posted
  • Veteran
Posted

I would say Yes, and my line of reasoning is going to be slightly different than others.
I will agree that purchasing a console to play just one game is not the best of ideas, but let's face it, once you have the console for that one game, you then have it for all the other games on that console.
So if you need to convince yourself it is worth purchasing the console to play that one game as a gateway to play the other games it can offer, I say do it.
If for some reason you only plan to play TLOU and nothing else, then no. It is not a good idea to purchase any console for one singular game, no matter how good the game may be.

Grand Master

torrentthief

Posted
Posted

 

No I haven't played the game yet just seen YouTube footage.

you do realise that it is available on the ps3 don't you? You can buy a 2nd hand ps3 for about 1/4 of the price of a new ps4. You could even sell it on after completing the game and lose very little money. I think the last of us 2 is being created btw. If you waited you could get a ps4 slim with the last of us 1+2 as a bundle.

Grand Master

DirtyLarry Veteran

Posted
  • Veteran
Posted

What kind of replay valve does single player have ?

Not much. I do know plenty of people that have replayed it especially since the harder difficulties do change the game quite a bit, but the core game itself is not such that there is much incentive for playing it again. So I would say it really depends on how much you like the game itself. I know a few people who beat the game then went back and played the Grounded mode, as they said that was the "real" experience. It is not a game that is designed to be played multiple times, but plenty of people have played it multiple times. All just depends on how much you personally like it.

As an example I am currently playing the Uncharted Collection on the PS4. I have already played all of the Uncharted games, but I really enjoy them and I am also appreciating the effort that went into the remaster and having each game at 1080p and 60 FPS is enjoyable. With that said I would not say the Uncharted games were designed in such a way that they reward multiple play throughs, but I liked the games so much I am cool with playing it again.

Grand Master

+Audioboxer Subscriber²

Posted
  • Subscriber²
Posted

Not much. I do know plenty of people that have replayed it especially since the harder difficulties do change the game quite a bit, but the core game itself is not such that there is much incentive for playing it again. So I would say it really depends on how much you like the game itself. I know a few people who beat the game then went back and played the Grounded mode, as they said that was the "real" experience. It is not a game that is designed to be played multiple times, but plenty of people have played it multiple times. All just depends on how much you personally like it.

As an example I am currently playing the Uncharted Collection on the PS4. I have already played all of the Uncharted games, but I really enjoy them and I am also appreciating the effort that went into the remaster and having each game at 1080p and 60 FPS is enjoyable. With that said I would not say the Uncharted games were designed in such a way that they reward multiple play throughs, but I liked the games so much I am cool with playing it again.

Yeah that is the incentive in a nutshell for replaying these games. When the HD remasters came about it gave enough to the experience to play it at 1080/60, otherwise they are linear narratives most will just play once (I played TLoU twice but once on PS3, once on PS4). Undoubtedly if you've never played Uncharted or TLoU having your first playthrough on the PS4 is just the icing on top to experience at 60FPS.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • WhatsApp is getting usernames, and you can reserve your preferred one now

      By Fiza Ali · Posted

      WhatsApp is getting usernames, and you can reserve your preferred one now by Fiza Ali Sharing your phone number isn't always something you want to do, especially with people you've just met. Whether it's someone from a class, a local community group, or a sports team chat, handing over your number can feel like giving away more personal information than necessary. That's exactly the problem WhatsApp is trying to solve with its upcoming usernames feature. The company has announced that users can now reserve a unique WhatsApp username ahead of the feature's wider rollout later this year. Once usernames become available, they'll let people connect without revealing their phone numbers. It's a change that makes a lot of sense for group chats. Right now, everyone in the group can see your phone number. With usernames enabled, that won't necessarily be the case when someone contacts you for the first time. WhatsApp says it's opening username reservations early because more than three billion people use the app, meaning plenty of people are likely to want the same usernames. Reserving one now gives users a better chance of securing the name they actually want before the feature launches more broadly. If your preferred username is already taken, WhatsApp will also offer a built-in username generator to suggest available alternatives. The feature isn't only aimed at individual users. Creators, businesses, and organisations will be able to claim the same username they already use on Instagram or Facebook, making it easier to keep a consistent identity across Meta's apps. Furthermore, privacy is a big part of how WhatsApp is introducing usernames. There won't be a public directory where people can browse or search for usernames. Instead, people will need to know your exact username before they can start a conversation with you. Additionally, users can also choose to enable a username key, which adds another layer of control by requiring people to enter that key before sending a message. Once the feature rolls out, people who choose to use a username will no longer have their phone number shown when messaging a person or business for the first time. If you want to reserve a username, make sure you're running the latest version of WhatsApp, then head to Settings > Account > Username. The tech giant says usernames will roll out gradually over the coming months, and users will receive an in-app notification when the feature becomes available in their country.
    • How do you future-proof a home or small office network?

      By sphbecker · Posted

      When I think about a network, there are really two aspects, the hardware and the wiring. So here is what I would do for both. Wiring: Use Cat6A for the patch panel, outlets, and all structured cables (cables installed in walls). Run plenty of Wireless Access Point (WAP) cables, as a general rule, assume a signal can only pass through 2-3 walls and can't pass through a floor (that is conservative, but trust me on this if you want strong WiFi)  Cat6 patch cables are fine for now if you don't plan to run 10gig, those are easy to replace later if needed. Run OS2 single-mode fiber to anywhere you think you may have a server or sub-switch. (yes, single-mode for everything on a small network, don't mess with multimode unless you have entire racks of servers and that minor module cost and power savings will matter). If you really want to future proof, also run fiber to any high density WAP locations, it is likely that WiFi 8 WAPs will push the limits of 10g. Run 6-12 pairs of single-mode fiber between your MDF and the building's MDF, even if you only need 1 or 2 pairs now, those extra pairs will pay off down the road. Hardware: (its easy to say "get all the features incase you need them", so instead of futureproofing, I am going to take approach of suggesting areas worth investing in, and areas you can save money). Don't overspend thinking you need every feature on every port. You don't need 10g on every port, you don't need PoE on every port. Don't overspend on redundancy either, unless you are ready to buy two of everything, don't waste money buying two of some things and not others. Dual power supplies are worthwhile, but probably not HA or multi-path redundancy.  Get 1 "distribution layer" switch that your router/firewall will connect to as well as all your access layer switches below. This should be a fully managed 10g+ switch with a combination of copper and SPF ports, a few 25g uplink ports are nice for this switch. Given that you said it is a small network, I suggest also using that distribution layer switch for servers and WAPs, meaning it will need PoE. Speaking of wireless, get good professional tri-band WAPs, and either turn on the band stirring options, or limit 2.4 to an IoT only SSID. This will provide a solid WiFi capable nearly everything but the highest of bandwidth clients...you could even consider skipping wiring workstations depending on usage. Access layer switch for workstations and printers can be cheaper switches, 2.5g is a good sweet spot between price and future proofing, but even 1g is fine for most individual clients (the kind that could probably be fine on WiFi). You can consider saving a little on access layer switches by only getting 1 PoE switch for whatever needs it (remember your WAPs are connecting to the distribution switch, not here), and non-PoE for your workstations, because desk phones are falling out of favor. You can also save money here by not buying managed switches if you don't need them--but really do some soul searching there, if you go this route, then anything that isn't on your workstation VLAN would either need to be connected to the distribution switch, or its own access layer switch. Also, don't feel like you need a fancy fabric stacking switches for your access layer, that is the point of the higher-end distribution layer, to remove the need for things like that at this level. Home Hardware: I'm realizing the above assumed an office setting, if this if for your house and home lab then the above still applies, but you'll probably want everything managed and PoE, just because, but you probably also don't need multiple access layer switches. If your total port count is below 24, just skip separating distribution layer and access layer and just get one nice switch with the features you want. If you are at the point of considering a 48-port switch, I would instead get a nice high-end distribution switch for things that need it, and cheaper access layer switches with specs based on the needs of connected devices. For home use, don't worry about home running every device to the main switch, there is nothing wrong with running sub-switches for your media areas and office, those essentially become your access layer, just look for sub-switches with a 10g uplink so sharing bandwidth isn't an issue. Just make sure you always connect them to your distribution/main switch, don't daisy chain, the path should never have more steps than Client>Access>Distribution>Firewall>Internet.
    • Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers

      By Karthik Mudaliar · Posted

      Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers by Karthik Mudaliar Google's Gemini-powered "Take notes for me" feature inside Google Meet is now available to Google AI Pro and Ultra subscribers. The features work on Google Meet for web as well as on mobile, and Google says that subscribers can use it for meetings they host in many supported languages. As the name suggests, "Take notes for me" allows Gemini to listen to a meeting, generate a summary, identify action items, and save the notes as a Google Doc in the user’s Drive. After the meeting, the organizer receives an email recap with the summary and action items, while the notes can also be attached to the related Calendar event depending on the meeting setup and sharing settings. The feature isn't automatically turned on for everyone, though. Google says that all meeting participants are notified when note-taking is turned on, and users can start it from the pencil icon in Meet or enable it for future calls through Meet’s meeting records settings. For work or school accounts, administrators can also control whether the feature is available and may require explicit participant consent for note-taking, recording, or transcription features. The feature first launched back in 2024, when it was available just for selected Workspace users. Over the years, Google added refinements and more options, including the ability to enable it when scheduling meetings via Google Calendar. Google's support docs say that the feature currently supports English, French, German, Italian, Japanese, Korean, Portuguese, and Spanish, but only one language at a time. Meetings with multiple spoken languages are not currently supported, and Google recommends using the tool for meetings between 15 minutes and eight hours. The new feature makes Google Meet closer to its rivals that have AI tools already built in. Microsoft Teams has recently started offering Copilot and intelligent recap features that summarize meetings, surface highlights, and help with follow-ups, while Zoom’s AI Companion can also generate meeting summaries from desktop and mobile meetings.
    • GnuCash 5.16

      By Copernic · Posted

      GnuCash 5.16 by Razvan Serea GnuCash is a personal and small business finance application, freely licensed under the GNU GPL and available for GNU/Linux, BSD, Solaris, Mac OS X and Microsoft Windows. It’s designed to be easy to use, yet powerful and flexible. GnuCash allows you to track your income and expenses, reconcile bank accounts, monitor stock portfolios and manage your small business finances. It is based on professional accounting principles to ensure balanced books and accurate reports. GnuCash can keep track of your personal finances in as much detail as you prefer. If you are just starting out, use GnuCash to keep track of your checkbook. You may then decide to track cash as well as credit card purchases to better determine where your money is being spent. When you start investing, you can use GnuCash to help monitor your portfolio. Buying a vehicle or a home? GnuCash will help you plan the investment and track loan payments. If your financial records span the globe, GnuCash provides all the multiple-currency support you need. Between 5.15 and 5.16, the following bugfixes were accomplished: Bug 421610 - RFE: Include logical dates for View->Filter by "date range"The Select Range section of the Date tab of the register's Filter By dialog box is changed to provide relative, specific date, or days ago options for the start and end of the filter range. The Show number of days item label is changed to Show from days ago to better reflect what it does. Bug 436105 - esc key not working as expected in register: Enable the escape key to cancel a field edit. Bug 797384 - Gnucash doesn't handle commodity prices with big numerator/denominator properly. Bug 798004 - Next gen UI for stock transactions Bug 799314 - Add "enter now" option in scheduled transaction editor. tab to allow users to select the scheduled transactions to be included in a “Since Last Run…” window. If there are no instances of a selected transaction triggered by today’s date, the next instance is triggered. Bug 799751 - autocomplete crash Bug 799759 - Users can't Enable entries via Checkboxes on Scheduled Transactions PageAllow the Enabled box in the list of scheduled transactions to be operated instead of having to open the transaction editor dialog and change the Enabled checkbox. Also added use of the Name column as the secondary column sort for all the other columns. Bug 799762 - Poor handling of cases where hidden/placeholder accounts are used in the account register Bug 799766 - Double line preference not respected in search register Bug 799767 - POST /accounts in bindings/python/example_scripts/rest-api is broken Bug 799777 - `xaccSplitSetParent`: reparenting a committed split silently drops its KVP slots (online_id, cap-gains links) Other changes & improvements: Numeric values may now be selected to copy in the Accounts page. Add new Finance::Quote source Finnhub.io: Free API key (personal/non-professional use) available at https://finnhub.io. Set FINNHUB_API_KEY environment variable to API key to use this source. As of June 2026, free tier API limit is 60 API calls/minute. The Investment Lots report has new optional columns for Computed Annual Growth Rate. Python Bindings: Improved translation of primary object (Account, Transaction, Split, etc.) so that they can be treated as normal Python objects. This is accomplished with SWIG magic so no existing code is obsoleted. Python Bindings: Better conversion of GLists to Python lists. Python Bindings: Destroy the QofSession in the Python Session dtor to prevent leaving the database locked. [engine] Add first-class online_id accessors for Split and Account and make them available to Python bindings, removing the unused Transaction online_id property. Improve C++ implementation of QofBook. Correct the Doxygen doc for qof_instance_get/set_kvp. [gnc-log-replay.cpp] fix incorrect guid dump Add some Boost library requirements needed by libgnucash-guile to CMakeLists.txt so that missing feature will fail at configure time. Use Compile-time Regular Expressions instead of std::regex in gnc-filepath-utils.cpp and instead of boost::regex in the CSV importer, with the CTRE v3.11.1 header added to borrowed [gnc-filepath-utils.cpp] null check char* arguments Add ChartJS licenses. Removed AEX from list of commodities. euronext.com is now using JS based anti-webscraping. [report-core] always offer options summary in reports. This is useful to debug reports. The Add options summary option is removed because it's no longer optional. Remove remaining obsolete IMContext from sheet Fix blurry text in HiDPI offscreen-rendered widgets Add port field to database connection dialog: The convention of appending the port number after the host isn't obvious. When editing a split in the register treat the account as being changed only if it isn't the one selected before editing instead of if the user performed an edit Return immediately from qof_book_destroy if hash_of_collections is null. If qof_book_destroy is called on a QofBook* freshly created with qof_book_new (usually because it was used to create a session that now must be destroyed) it would try to empty the non-existent hash tables, crashing. Clean up Flathub metadata to solve warnings at flatpak build time. Be consistent in naming GncPluginPage and GncPluginPageRegister HTML: Remove unimplemented function declarations. [gnc-html.cpp] remove unused buggy string conversion functions Convert libgnc-html to C++ Apply -Wall -Werr -Wmissing-prototypes to C++ compilation on Windows and fix the resulting errors. New and Updated Translations: Arabic, Croatian, Danish, Dutch, German, Finnish, Hungarian, Korean, Norwegian-Bokmal, Spanish Download: GnuCash 5.16 | 176.0 MB (Open Source) Links: GnuCash Home page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally launches WSL Containers in public preview

      By David Uzondu · Posted

      Microsoft finally launches WSL Containers in public preview by David Uzondu Microsoft has announced that WSL containers, a feature that allows developers to run Linux containers natively inside Windows without the need for Docker Desktop, is now available in public preview several weeks after Microsoft previewed it at Build 2026. To use the new container feature, you first have to install the latest pre-release version of the Windows Subsystem for Linux by running a quick update command in your terminal: wsl --update --pre-release After installing, you'd get access to the new Linux container CLI (wslc.exe) and the programmable API. Microsoft said that the CLI has a "familiar format" that matches the toolsets developers already use every day. If you know standard Docker commands, your muscle memory will translate directly to wslc.exe, which even features a built-in alias called container.exe. You can quickly run a full Ubuntu KDE desktop container by exposing ports, or pass your graphics card straight into a machine learning environment to run PyTorch workloads. Passing the --gpus all flag inside the run command instantly links your hardware. Image via Microsoft As for the API, developers can now embed Linux container operations directly inside native Windows applications without exposing the command line to users. The team integrated the API directly into MSBuild and CMake, so developers can define container steps directly in project files. Apart from bringing the CLI and API into public preview, Microsoft also said that it's working on a new default file system called virtiofs to speed up file transfer rates between Windows and Linux. Microsoft also introduced an experimental networking mode named consomme, which resolves compatibility issues with corporate VPNs by routing Linux network traffic straight through Windows. One thing to note about WSL containers is that they don't run in your standard WSL distributions; instead, every application and CLI session spawns its own lightweight Hyper-V utility VM in the background. This basically reduces the chances of one app snooping on the container of another app.

  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post

  • Popular Contributors

    1. 1
      +primortal
      535
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!