Restaurant POS XP machine keeps loosing Internet connectivity


Recommended Posts

My wife's restaurant has a inherited small network consisting of a POS that is connected to a Netgear FVS318 firewall router. The problem is that the POS Windows XP machine will loose Internet connectivity intermittently (mostly on Friday's). 
One thing that used to resolve the issue was to (from the POS machine with static IP) perform a "ping www.yahoo.com" command. Somehow pinging a site enabled Internet access again. I don't understand how the ping resolved the issue. I'm thinking there is something broken with the Netgear firewall router.  Also, power cycling all the components one by one fixed the issue at times. 

Here's a description of the small network.
POS machine (Windows XP) ----> Hub----> Netgear firewall ---> AT&T DSL router/ modem
printer for POS connected to Hub 
There are other pc's connected to the AT&T DSL router.

1 hour ago, Ph1b3r0pt1c said:

Check the dhcp timeout on leases, not saying this is it, but on some routers I have had to change it to like 3 days. It could also be bad NIC, or bad router.

The POS machine has a static ip assigned does this negate dhcp on the Netgear router?

so your saying these fixes you use to do no longer work?

 

You mention other machines on the network, does their internet access go down too.. Or is it just this one POS machine?

 

Yes if your saying the POS has a static IP on it, then for sure dhcp has nothing to do with.  Its possible that a ping to anything could force a arp for the gateway IP... Lots of things that might be going on if that use to bring the connection back.

 

But it seems that is not working now?  I would suggest when its not working validate that you have access to the routers IP...   From a cmd prompt do a ipconfig /all it will show you what your default gateway is and what your using for dns, etc..  Why don't you post that?  Since you say your behind a router have to assume that IP is rfc1918 and no issues with posting that info..

 

Can you ping the gateway via IP?  Can you ping say 8.8.8.8, can you still resolve stuff like www.neowin.net or www.google.com when you try and ping those names?  Do you get back an IP or some other error?

 

Can you ping the other machines on the network by their IPs?

 

 

Could be other machines (like the CC Reader, etc) that need it *right there* on the same subnet, then feed it into the back office for recordkeeping, which then print the orders to the line, waitress station(s), etc. Likely many reasons why it's on a hub.

 

I agree that the first failure point to check would be the CAT5. Over time those degrade in the most stupid ways that would seem to be counter-intuitive. They aren't environment-proof, either. Heat, grease, getting brittle and failing just out of spite, you name it.

 

The other thing to check would be the hardware the POS machine is running itself. Just because it's losing connectivity mostly on Fridays doesn't mean anything special -- those are your "busy days", yes? That means the Network Chipset is overheating due to use. This is a symptom, usually with mainboards using Nvidia chipsets, that the CPU, board, or both are in a pre-failure condition and that they need replacing soon.

 

Bottom line is that you should start making arrangements to get that POS data transferred to something else, and look into getting another machine to handle your sales. Not because it's XP, but because that hardware is beginning to fail.

when he says hub, I am pretty sure he means switch ;)  Hubs have not be standard for years and years..  Only time you would currently use an actual hub is when you were wanting a cheap network probe to sniff traffic.  But lets hope your traffic is less than 100mbps..

 

How anyone can point to the POS hardware failing with the amount of info given is just pure and utter guess work..  There is nothing that points to any sort of hardware failure at all as of yet.

 

I would suggest get some actual info before start replacing hardware or moving equipment around to other connections.

 

  • Like 1
2 minutes ago, BudMan said:

when he says hub, I am pretty sure he means switch ;)  Hubs have not be standard for years and years..  Only time you would currently use an actual hub is when you were wanting a cheap network probe to sniff traffic.  But lets hope your traffic is less than 100mbps..

 

How anyone can point to the POS hardware failing with the amount of info given is just pure and utter guess work..  There is nothing that points to any sort of hardware failure at all as of yet.

 

I would suggest get some actual info before start replacing hardware or moving equipment around to other connections.

 

Because of the symptomology. I've got a lot of experience with this, and recently. I know what I'm doing. :)

So you have a machine that has intermittent internet..  You don't even know if the other machines are also not having internet, have not been checked.  Or if the machine can ping these other machines even..  But sure time to replace the POS machine..

 

You don't even know how old the POS is, for all you know they put it in 2 months ago..

 

From the info given there is no way to make even guess to what the problem is... For all you know their ISP is having issues...

 

Where did the OP state that the machines connected to the router work when this POS was having problems...  How do you know its not the netgear firewall having a problem..  Pointing to the POS to be replaced with the amount of info at hand is just nonsense guess work..

 

He mentions that the POS has a staic iP, but more than likely the netgear just has dhcp on its wan to the adsl network...  Could be something as simple as the netgear is not renewing its lease on its wan connection to the adsl network...  I could go on and on and on with what it MIGHT be from the info given..  But they would all be just pure speculation without any actual info to go on..

 

"those are your "busy days", yes? That means the Network Chipset is overheating due to use. "

 

That is just pure BS speculation... For all you know friday is their slow day of the week, and they did a total of 3 transactions that day..  Your guessing is no better than saying its having issues because mercury is in retrograde... 

 

Same goes for maybe the ports are full of grease, or the cable is failing because of heat??  Who said the POS was in the kitchen or exposed to heat or grease?  For all we know from what is posted this is a raw vegan restaurant where they serve tofu and sliced veggies..

@John Teacake While I am not going to take any such bet on the type of restaurant ;)  That example was a bit out there to be sure.. Just trying to point out that there is clearly not enough info to make speculation like time replace the POS because its hardware is failing..

18 minutes ago, BudMan said:

@John Teacake While I am not going to take any such bet on the type of restaurant ;)  That example was a bit out there to be sure.. Just trying to point out that there is clearly not enough info to make speculation like time replace the POS because its hardware is failing..

Quite a few members here see the word XP and spas out.

4 hours ago, surfer949 said:

My wife's restaurant has a inherited small network consisting of a POS that is connected to a Netgear FVS318 firewall router. The problem is that the POS Windows XP machine will loose Internet connectivity intermittently (mostly on Friday's). 
One thing that used to resolve the issue was to (from the POS machine with static IP) perform a "ping www.yahoo.com" command. Somehow pinging a site enabled Internet access again. I don't understand how the ping resolved the issue. I'm thinking there is something broken with the Netgear firewall router.  Also, power cycling all the components one by one fixed the issue at times. 

Here's a description of the small network.
POS machine (Windows XP) ----> Hub----> Netgear firewall ---> AT&T DSL router/ modem
printer for POS connected to Hub 
There are other pc's connected to the AT&T DSL router.

I for a moment thought you were saying POS as Piece of ..... not Point of Sale, It made me laugh then I realized it was POS as in register and not well you know :shiftyninja:.

Yup XP and POS I too would jump the other meaning of POS vs Point of Sale ;)

 

There are many XP based POS still out there, I am fairly sure they lost PCI compliance back in 2014..  But who says a standalone restaurant has to meet PCI to do CC transactions? Then again OP never stated they were doing that..

2 hours ago, BudMan said:

when he says hub, I am pretty sure he means switch ;)  Hubs have not be standard for years and years..  Only time you would currently use an actual hub is when you were wanting a cheap network probe to sniff traffic.  But lets hope your traffic is less than 100mbps..

I dunno, he's using a Windows XP (embedded?) POS terminal, so a HUB isn't out of the question here.

4 minutes ago, BudMan said:

Yup XP and POS I too would jump the other meaning of POS vs Point of Sale ;)

 

There are many XP based POS still out there, I am fairly sure they lost PCI compliance back in 2014..  But who says a standalone restaurant has to meet PCI to do CC transactions? Then again OP never stated they were doing that..

If they are storing the data or they are listed as the processor of the data/depositing into their own account and not using a 3rd party to process their charges, then they should be compliant

Honestly, everyone. I was attempting to be helpful. No reason to blow your stacks at me. Sheesh.

 

Did I not say that it was the hardware that I suspected, and that XP Point Of Sale was not at issue -- and to check the Cat-5 Cable for damage and wear/tear FIRST.

 

The symptoms described threw up a flag because I've had two machines both fail with similar hardware (Nvidia chipsets) and that's exactly the behavior they display when they are about to fail. 

 

The OP can further test this line of thought by allowing the machine to run. If it's indeed the chipset/mainboard that is failing, other peripherals will begin to intermittently fail such as USB, on-board VGA, and eventually the Southbridge itself as a whole. It won't take long for these problems to occur, less than a month depending on degree of use.

 

Seriously, I didn't post in this thread because I wanted to get flamed. I just want to help.

 

But, since we're on the subject -- there's FAR too much flaming going on all around, and I'm SICK TO ####### DEATH OF IT. I compose MYSELF in a respectful manner, and I expect the same in return. SO LIGHTEN THE #### UP, @BudMan. If I'm wrong, I admit I'm wrong, but you took things WAY too far laying into me like that.

laying into who??  Stop getting your panties all in a bunch over someone stating that there is not enough info given to tell someone to replace hardware...  JFC is this forum made up of 13 year old girls on their first period or what ;)

 

All I said was there was not enough info and any such advice would be guess work

 

"How anyone can point to the POS hardware failing with the amount of info given is just pure and utter guess work..  There is nothing that points to any sort of hardware failure at all as of yet."

 

When you made claim that you know because of experience I went into example of what information was missing that makes impossible to make such a claim.

 

nic overheating because of it being a busy day for transactions..  Come on - you can't honestly think that the case..  Is that card pumping out full pipe for hours and hours, ok maybe... It sending and receiving the tiny amount of data that is a transaction is just plain nonsense..  Talk about jumping to conclusions with no information at all..

 

WTF... You try and have a conversation and exchange your opinion on a subject and comments made and you get made out to be some asshat... 

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
    • In the way that you framed it incorrectly. You wrote: "The constant need to close all browser sessions and wait for a new version to install" There's no "constant need to close all browser sessions". That's factually incorrect. The browser downloads its updates in the background and installs them when you open it again. Silently. And there's no "wait for a new version to install", updates are small and take 2-3 extra seconds AT MOST, if any. If you have an SSD, there's zero extra time. Also, every mainstream browser operates this way. Firefox, the FOSS go-to browser, the default on almost every Linux distro, does exactly the same. Also, you don't need to constantly restart Edge for updates to install, you can completely ignore them and it doesn't even ask you to handle them, it's all silent and automatic. So I don't understand what else do you want.
    • DuRoBo Krono Review: Portable E-Ink reader with great ideas that need a bit of improvement by Taras Buria Phone-sized e-readers are gaining traction these days, with more people treating them as a getaway device to cure phone addiction (or at least they are trying to) or having a more pocket-friendly reader that is easier to carry and hold. The market now has plenty of such readers to choose from, and DuRoBo is the latest addition, a new player that offers a more interesting approach to the idea. The Krono is a $279 e-reader with an interesting twist, which tries to make the device more fun and ergonomic. Here is my review. Disclaimer: DuRoBo provided the review sample without any editorial input or pre-approval. The Krono comes in a phone-sized box with pink accents. Inside, you get the device itself, a short user manual, and a USB cable. The cable is a bit old-fashioned, Type-A to Type-C, which is a bit disappointing. Hot take: I would rather have no cable in the box rather than another Type-A cable that gets immediately thrown into my box full of similar cables I never use. The Krono also has no charger in the box, as it relies on accessories you already own, which is fine with me. Here are the specs: Dimensions 154 x 80 x 9.0 mm or 6.06" x 3.15" x 0.35" 173 g or 6.10 oz Materials Black or White plastic Display 6.13-inch E-Ink Carta 1200, 1,648 x 824 pixels, 300 ppi Touch-capacitive. Dual-tone frontlight. Processor 8-core Qualcomm Snapdragon 690 (QTI SM6350) 2 performance cores at 2.07 GHz 4 efficiency cores at 1.71 GHz Memory 6 GB Storage 128GB, non-expandable ~104GB available out-of-the-box Operating system Android 15 with a custom launcher Connectivity Wi-Fi and Bluetooth Battery 3,950 mAh battery Buttons and port USB Type-C port Power button, Volume button, Smart Dial Breathing Lights Audio Mono Speaker and Dual microphones In the box The Krono, a Type-A to Type-C cable, user manual Price $279 on Amazon First impressions Right off the bat, no, this is not a phone replacement. Do not approach this device thinking it can serve you as a dumb phone to cure your TikTok addiction. In addition to the fact that the Krono has no cellular connectivity, I strongly believe that no amount of extra devices can fix your phone addiction until you put some serious effort into it. The Krono is a phone-sized e-reader, a companion for your phone dedicated to reading without distractions. The DuRoBo Krono is made of plastic with a very fine texture. It is hardly premium, but I also cannot say it feels cheap. The device is also a bit thick, quite dense, and well-built without rattling or cracking. You get to choose between two colors: white and black. The front has quite thick bezels, which is hardly surprising for an e-ink device. These things use front light, with LEDs usually placed on the screen perimeter. While I do not mind thicker bezels, the notably larger chin cheapens the look a little. What I mind is a notable seam between the display and the main case, which, after just two days of use, collected plenty of dust and specks. The back of the Krono is what makes the device stand out. There is a cylinder (DuRoBo calls it the Axis) embedded in the back of the reader, housing three elements: a power button on the right edge, a Smart Dial on the left edge, and "Breathing Lights" on the back. An etched DuRoBo logo sits below the cylinder, and it is the only piece of branding you can find on the device. Overall, the design and materials are very unassuming, but the cylinder with additional control elements certainly elevates the look and makes it more interesting. Other physical elements include two microphones (one on the top edge and one on the bottom edge), a USB Type-C port, a volume rocker, and a single mono speaker. There is no fingerprint reader, so if you want to protect your device, a PIN is your only option. The official TPU case is not the most premium-looking Display The Krono has a 6.1-inch E-Ink Carta 1200 touchscreen display with a resolution of 1,648 x 824 pixels (300 ppi). The display is front-lit, and you can adjust the brightness and temperature from cool to warm. Unfortunately, the Krono lacks automatic brightness and temperature adjustments, and you cannot set a custom schedule for the frontlight. However, you can set it to always enable frontlight so that you can see what is happening on the screen when turning it on in a dark environment. On the bright side (get it?), the front light can get extremely dim so that the screen is barely readable in a pitch-dark room. The front light is also uniform across the screen, with no noticeable temperature gradients. I am very susceptible to uneven front light, and it is very easy for me to notice it, but the Krono is doing a very good job in this area. I also like that the edge shadow is not very prominent and barely visible in the black variant. E-Ink Carta 1200 is not the newest generation (there are Carta 1250 and 1300), but it is still a good display. It supports three modes: Clarity, Speed, and Quality. In Clarity mode, text is very sharp and easy to read, but you trade that for more ghosting, a slower refresh rate, and more artifacts when the display changes images. Speed mode, as the name suggests, boosts refresh rate and reduces ghosting, but fine print and text become more jagged. Finally, Quality mode is only available in Android apps. It has the lowest refresh rate, but in return, you get much better visuals, improved gradients, and more. Like brightness and temperature, you can toggle modes from the control center. It is available when swiping from the top-right corner of the screen (the top-left is for notifications). I also like that the Krono can work as a desk clock when not in use. It has a bunch of screensavers, including horizontal clocks with time, date, and current battery level. The screen refreshes once per minute, and battery drain is extremely low (not even 1% in 24 hours). It is a great use of the technology, and another thing I wish more e-ink devices featured. Smart Dial The Smart Dial is Krono's main party trick. It sits on the left side of the device and serves multiple purposes. You can twist or press it to perform various actions, depending on the current use case scenario. When reading books, twisting the dial flips through pages, and pressing it refreshes the screen. On the home screen, the dial adjusts the brightness, and holding the dial pressed launches voice note recording. Finally, a quick double press launches the DuRoBo AI chatbot. While the dial scroll is not notched, it is very smooth and has haptic feedback that confirms your actions, which feels very nice. As a long-term Apple Watch user, I love the idea behind the dial. It feels very natural and oddly satisfying to use, especially with that subtle haptic feedback. I never liked flipping pages with touch input, and I strongly believe each e-reader should come with some sort of physical controls for turning pages. The Krono has both volume buttons (which also work as page turners) and the dial, so you are free to use whichever you prefer. With that said, the dial is not perfect. For one, it sticks out of the case way too far for my liking, raising concerns about durability and longevity when carrying the Krono around in a pocket (it is a pocket-sized device after all). Also, it has too much wobble, which cheapens the experience and makes it feel a bit flimsy and unsecured. While there are two plastic guards on the Krono's case, they are way too small for any kind of protection. I also think DuRoBo should let users customize dial actions (the only available customization is scroll direction), particularly for long and double presses. Not everyone needs voice notes, and DuRoBo AI does not work without an active internet connection, leaving the long press essentially useless when offline. I do not mind these features, and I genuinely think they are useful, but I would rather have the ability to toggle between screen modes, turn the frontlight on/off, or launch my favorite app. I also agree with people on Reddit asking developers to let users adjust the dial sensitivity. I hope this is something DuRoBo can implement with a software update to make the experience more personalized (it is a Smart Dial, after all) and incentivize users to fiddle with the Dial more often. The Dial is a fantastic idea, so please, guys, improve it a little. As for ergonomics, they are mostly fine, but the dial's position may feel a little awkward and way too high. When I use a phone or a phone-sized gadget, I tend to rest one of its corners on my palm for a more secure grip. With the Krono, such a grip is impossible because you cannot reach the dial even with big hands. You have to lower the reader a bit and hold it like a bottle without any extra support for the bottom edge. Such a grip is not necessarily uncomfortable (the Krono is also light enough for it), but it requires a bit of muscle retraining. Sometimes, I do not bother with the dial and hold the Krono like my phone, flipping through pages with volume buttons, as they are perfectly positioned for my right-hand thumb. Interestingly, when testing the Krono, I would often find myself thinking that a roller embedded in the long plastic cylinder on the back of the device would have been a much more comfortable solution. There is a free idea for you, guys. Software The Krono runs Android 15 with a very minimal launcher on top. The home screen presents you with a list of apps, a scrollable list of widgets, and your user profile. Widgets can display time, calendar, or recent books for quick access. You can also add or remove apps from the home screen to keep the most useful stuff around without tapping "Apps." I like this minimalistic approach; it looks clean, easy to understand, and light. I understand that some may find the list of all apps way too clean, but fortunately, DuRoBo lets you switch to traditional icons. The reader also has a bunch of preinstalled apps: Read: The default app for reading. Browser: A Chromium-based browser. Files: A simple file manager. Music: A simple music player. Spark: A voice recorder with transcription support and AI summarization DuRoBo AI: A built-in AI chatbot. Transfer: An app for file transfer over Wi-Fi. If that is not enough, there is the Google Play Store, where you can download all the extra apps you need, alternative readers, podcast apps, chatbots, and more. DuRoBo is not trying to give you an all-in-one device. The standard software experience is quite minimal, which makes it easy to approach and learn. The standard reader supports EPUB, EPUB3, AZW3, MOBI, PDF, TXT, DOC, and DOCX, which is more than enough to let you read most books without third-party software. As for customizing the reading experience, you can select one of five built-in fonts, adjust size and thickness, adjust margins and spacing (only three variants for each), change text alignment and direction, toggle the reading status bar, and switch to dark mode. There is also text-to-speech, which utilizes Android's default TTS tech. While I like the simplistic approach, I cannot help but feel DuRoBo could have made the built-in reader a bit more customizable. However, I am not going to bog down on this, as you can always install any other reader you prefer using the Play Store or by sideloading an APK. Getting books to the Krono is very simple. Given that the device is an Android smartphone without cellular connectivity, you can transfer files via a USB Type-C cable, download them using the built-in browser, share them over Bluetooth, or use cloud storage. My favorite was the built-in Transfer app. It is simple, reliable, and very well-designed. I was surprised by how well-designed the web portal is. It is fast, pretty, and properly categorized. Well done! Once you have your books loaded, you can highlight or underline text, add annotations, bookmark pages, check the table of contents, and ask AI about the selected text. Unfortunately, the Krono has no built-in vocabulary, but again, that is something a third-party reader could fix. Overall, the built-in reader is light and snappy, with just the minimum amount of features for a regular user to enjoy reading books. The Krono has no built-in reading tracking, so stat nerds will have to look for third-party reading apps. However, you can set a daily reading goal, and the reader will notify you when you reach it (for example, one hour). You can also set a reminder to read at a certain time, and when the time comes, the Krono will light up its back LEDs and unlock itself to nudge you. Other than that, the rear LEDs do nothing, not even showing charging progress, which is an unfortunate misopportunity if you ask me. Quirks aside, Krono's Android runs quite snappily and bug-free. Early reviews of the Krono criticized its Android 13-based software quite a lot, but now, the reader runs Android 15, and its software has fixed plenty of initial complaints. I never experienced any issues with built-in apps. AI attempts The DuRoBo Krono comes with a built-in AI chatbot. There is no information on what model powers this thing, but the system says it was "trained by Google." You can launch the bot from the app list or by double-pressing the dial. It works just like any other chatbot, and you can ask it anything by typing or using voice input. The AI saves your chats, and you can rename, export, or delete them. DuRoBo AI requires an active internet connection, and it does not work offline. Its reach and capabilities are also limited. You can only chat in the app and use it in the reader app as a makeshift vocabulary. However, the implementation is kinda awkward. You can only send a selected portion of text to AI without giving it any requests or instructions. I highlighted the word "dumb," and it apologized to me for not being useful. You also cannot ask follow-up questions or send the generated response to a separate chat. The chatbot is also slow, even with fast Wi-Fi, making the overall experience quite frustrating, which makes me again wish for the ability to remap the double press to something else. Spark, the standard voice recording app, also uses AI for note summarization and transcribing. Neither feature works offline, unfortunately. Spark records notes up to 30 minutes using Krono's dual microphones, and you can rename or export notes. Transcription quality is decent, and the speed is alright, but you can find much better solutions in the Google Play Store. What I like about Spark is that transcribed notes are not locked, and you can always type more to elaborate on your ideas, which is handy. Overall, I like that the Krono is not shoving AI down my throat, but to be honest, there is really not that much to shove. AI features here feel raw and need improvements to be more useful. Battery Life Like most E-Ink readers, the Krono has fantastic battery life. Even with a clock as a screensaver, its standby power consumption is incredibly low. And when in use, you can get weeks of reading on a single charge. Without the front light, my unit never sipped more than one or two percent of battery during a one-hour reading session. It was nice to see plenty of battery-related settings. You can limit charging at 80% to protect battery health long-term, check the number of charging cycles, manufacturing/first-time use date, battery health, and the maximum capacity. Additionally, the Krono lets you select what hardware remains enabled when sleeping. This lets you keep Wi-Fi and Bluetooth on (say, if you want to receive notifications, for some reason) and keep audio playing when locked. Turning these features off effectively eliminates any standby battery drain. I left my Krono sitting for 24 hours with a clock screensaver on, and it did not drop a single percent. The pretty big 3,950 mAh battery justifies the device's thickness and ensures you do not have to charge it for long periods. Speaking of charging, it is capped at only 10W, which is a bit disappointing, as getting such a big battery to 100% takes a notably long time in the era of super-fast charging smartphones. DuRoBo Moodi The Moodi is a standalone, optional accessory for your Krono. It is a wireless remote with two customizable buttons that you can use to flip pages, control media, or scroll webpages. The accessory connects via Bluetooth. Despite having a built-in rechargeable battery, it is extremely light. While the Moodi's shape and form factor is not what I would call particularly ergonomic, it is not uncomfortable to hold and use. The Moodi comes with six removable magnetic buttons with various smiley faces. Buttons sit securely, and they have nice-feeling, albeit a little loud, clicks. It is a cute touch that adds a little more fun and character to the device. There is also an accented power button and a single status LED. The latter displays charging status and connection mode. The Moodi supports three modes: Reading: Buttons work as volume buttons, allowing you to flip pages in the built-in reader or other apps that support page turning with volume buttons. Media: Buttons work as skip forward/backward, which is useful when listening to audiobooks, podcasts, or music. Scroll: The third mode lets you scroll pages in the web browser or any other application The Krono properly detects the Moodi and presents you with an on-screen guide when you connect it for the first time (it also displays the battery level). However, you can only change modes by holding both buttons for a few seconds. It is also worth noting that the Moodi works with other devices. I connected it to my iPhone and it let me adjust volume or control media playback. Sadly, the scroll did not work, so you cannot use it to waste time scrolling TikToks. Overall, the Moodi is a cute little accessory, which I can recommend for those who read a lot. It is very useful for remote page flipping when you do not want to burden your hands by holding the Krono all the time. I only wish DuRoBo included a lanyard for the built-in loop. As for the battery life, after using the Moodi for a few days, I only managed to drop several percent of its 90 mAh battery. Despite the small size, it is rated for weeks of use, which is pretty impressive. At $35.99, I cannot say the Moodi is a must-have accessory, but I see the appeal. I prefer using the Krono with its Smart Dial, as I rarely read for more than 40-60 minutes in one sitting. However, if you have a stand and like reading for long periods, the Moodi is the right thing to have. It is a bit more expensive than regular page flippers on Amazon, but it is on par with similar products from Kobo or BOOX. Plus, it has a little more fun to it with removable buttons and better integration into the Krono. Conclusion At the end of the day, DuRoBo Krono is a nice pocket-sized e-reader. Its software focuses on the main things without trying to be everything at once. The smart dial idea is unique and great, and I wish more manufacturers had something similar in their devices. The display is also good, with an even frontlight and "always-on" support. I did not notice any deal-breaking issues with the Krono. However, you can feel that the idea needs some improvements, such as a slightly stiffer dial in a more ergonomic location, perhaps a little more premium materials, and better software customization. I hope the company won't give up on the idea and improve the dial and ergonomics in the second generation. Buy DuRoBo Krono Black - $279.99 on Amazon Buy DuRoBo Krono White - $279.99 on Amazon Buy DuRoBo Moodi - $35.99 on Amazon As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      195
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!