XB1 doesn't support HDMI CEC?


Recommended Posts

For example when I turn my Nvidia Shield TV or PS4 on my TV and audio system will come on. Same with PS3. Or if I'm watching TV and push the PS button on my DS4 it will automatically go to the PS4 menu.

 

When I turn my One on I need to manually turn on TV, and then set it to the right HDMI input. Bit of a PITA :(

Link to comment
https://www.neowin.net/forum/topic/1294584-xb1-doesnt-support-hdmi-cec/
Share on other sites

Think the Kinect could have been used as an IR blaster, so when you said "Xbox, on" it would start the configured bits of kit - TV, sound etc. 

 

Does CEC just allow the powering on of the device or does it switch to the correct input too?

51 minutes ago, HawkMan said:

I dunno. I'm pretty sure it does as it uses it when you use the tv function. I'm more surprised that anyone actually uses the clunky unreliable cec though

 

 

Unreliable? In over 4~5 years it's never once not turned my TV and audio system on for me automatically. That's all I've used it for. Well, plus using my TV remote to control my Rasp Pi/Amazon TV and now Nvidia shield. Pick up my DS3/DS4, push the PS button and everything turns on from standby. Don't even need the TV remote other than to adjust volume.

 

It seems I need to buy a Kinect or IR blaster -_- I just thought any device with HDMI had it as standard, as I've never not owned a device with HDMI that didn't support it.

  • Like 2

Every system has a subtly different implementation of CEC.  The worst offender I have seen so far is the Amazon FireTV which won't let me switch anything off as it appears to constantly send a 'switch on' notification to all the rest of my kit.

 

8 minutes ago, vcfan said:

nope, because the xbox one was designed with Kinect included, and its IR blaster turns on the tv. BUT, you don't actually need Kinect. you can just buy a $5-$10 IR blaster and connect it to the back of the xbox one and it works the same, controlling your tv,cable box,etc..

I'm assuming they could patch in support though now that Kinect isn't mandatory? 

 

I'll probably opt for a 2nd hand Kinect. With an IR blaster I guess it'll need a TV remote input or will everything come on if I turn on my One controller? That's what I want to try and achieve. 

1 hour ago, Audioboxer said:

For example when I turn my Nvidia Shield TV or PS4 on my TV and audio system will come on. Same with PS3. Or if I'm watching TV and push the PS button on my DS4 it will automatically go to the PS4 menu.

 

When I turn my One on I need to manually turn on TV, and then set it to the right HDMI input. Bit of a PITA :(

Imagine the days when you had to get up walk over and turn a knob just to change the channel.  You didn't need to worry about what input it was on because there weren't any, just channel 3 for the VCR.  Not sure if that qualifies as a capitalized pita.

12 minutes ago, daorbed9 said:

Imagine the days when you had to get up walk over and turn a knob just to change the channel.  You didn't need to worry about what input it was on because there weren't any, just channel 3 for the VCR.  Not sure if that qualifies as a capitalized pita.

Well we don't live in those days now and for someone used to it all just working automatically I don't see why something not adhering to that "norm" for me can't be classed as a PITA for me. Not really bothered if others don't care. 

  • Like 2
1 hour ago, daorbed9 said:

Imagine the days when you had to get up walk over and turn a knob just to change the channel.  You didn't need to worry about what input it was on because there weren't any, just channel 3 for the VCR.  Not sure if that qualifies as a capitalized pita.

My dad had a length of bamboo for such duties :laugh:

  • Like 1

CEC is such a rotten mess, hardly anyone supports "actual" CEC, but CEC "compatible" proprietary variations.

 

trying to get all the different systems to play well together when you set up  systems for people is a nightmare. easiest solutions is to turn them all of and tell them to just use the remotes, as even when they work if they have a decently capable TV and receiver they'll need the remotes for them anyway, that or a harmony. 

1 hour ago, HawkMan said:

CEC is such a rotten mess, hardly anyone supports "actual" CEC, but CEC "compatible" proprietary variations.

 

trying to get all the different systems to play well together when you set up  systems for people is a nightmare. easiest solutions is to turn them all of and tell them to just use the remotes, as even when they work if they have a decently capable TV and receiver they'll need the remotes for them anyway, that or a harmony. 

Maybe if you have a lot of different systems then I guess. I've only had Sony/Panasonic, then Panasonic/Panasonic, and now Sony/Sony for my TV/receiver combos (with the additional Amazon/Nvidia products inbetween). All worked fine together. If it's something MS can patch into the One I don't see why they wouldn't considering they've cut Kinect. If it's hardware based then obviously that's a no go. An IR blaster or a Kinect is just another device/wire I need to have around to do something I'm not used to being a luxury or additional expense.

 

For what it is worth my parents are rolling with an LG/Sony combination fine.

 

Your mileage may vary, but I can't call something a mess that's worked perfectly for me for years and helped enabled me be a lazy ass with no need for an expensive all in one remote.

  • Like 1
6 hours ago, Audioboxer said:

For example when I turn my Nvidia Shield TV or PS4 on my TV and audio system will come on. Same with PS3. Or if I'm watching TV and push the PS button on my DS4 it will automatically go to the PS4 menu.

 

When I turn my One on I need to manually turn on TV, and then set it to the right HDMI input. Bit of a PITA :(

Nope, and neither did the 360. PS3 / 4 have spoiled us :p

  • Like 1
4 hours ago, jasondefaoite said:

Maybe the xbox 1.5 will support CEC. But it is confirmed the Xbox One does not.

So it definitely needs hardware support? Thought it could just be patched in. 

4 hours ago, Audioboxer said:

So it definitely needs hardware support? Thought it could just be patched in. 

From what I read it can't be added via software. I think they would have done it already if it was possible as it has been requested by a lot of people.

16 hours ago, Audioboxer said:

I'm assuming they could patch in support though now that Kinect isn't mandatory? 

 

I'll probably opt for a 2nd hand Kinect. With an IR blaster I guess it'll need a TV remote input or will everything come on if I turn on my One controller? That's what I want to try and achieve. 

CEC most probably a software problem and patchable.

 

ir blaster can turn everything on when you turn your xbox on with the controller. but if you're on another input, you would have to manually change it.

  • Like 1
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
    • Get over it, has nothing to do with my point.
    • I really don't like these rounded corners and huge borders in the viewport. They just waste space without anything in return.
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!