XB1 doesn't support HDMI CEC?


Recommended Posts

For example when I turn my Nvidia Shield TV or PS4 on my TV and audio system will come on. Same with PS3. Or if I'm watching TV and push the PS button on my DS4 it will automatically go to the PS4 menu.

 

When I turn my One on I need to manually turn on TV, and then set it to the right HDMI input. Bit of a PITA :(

Link to comment
https://www.neowin.net/forum/topic/1294584-xb1-doesnt-support-hdmi-cec/
Share on other sites

Think the Kinect could have been used as an IR blaster, so when you said "Xbox, on" it would start the configured bits of kit - TV, sound etc. 

 

Does CEC just allow the powering on of the device or does it switch to the correct input too?

51 minutes ago, HawkMan said:

I dunno. I'm pretty sure it does as it uses it when you use the tv function. I'm more surprised that anyone actually uses the clunky unreliable cec though

 

 

Unreliable? In over 4~5 years it's never once not turned my TV and audio system on for me automatically. That's all I've used it for. Well, plus using my TV remote to control my Rasp Pi/Amazon TV and now Nvidia shield. Pick up my DS3/DS4, push the PS button and everything turns on from standby. Don't even need the TV remote other than to adjust volume.

 

It seems I need to buy a Kinect or IR blaster -_- I just thought any device with HDMI had it as standard, as I've never not owned a device with HDMI that didn't support it.

  • Like 2

Every system has a subtly different implementation of CEC.  The worst offender I have seen so far is the Amazon FireTV which won't let me switch anything off as it appears to constantly send a 'switch on' notification to all the rest of my kit.

 

8 minutes ago, vcfan said:

nope, because the xbox one was designed with Kinect included, and its IR blaster turns on the tv. BUT, you don't actually need Kinect. you can just buy a $5-$10 IR blaster and connect it to the back of the xbox one and it works the same, controlling your tv,cable box,etc..

I'm assuming they could patch in support though now that Kinect isn't mandatory? 

 

I'll probably opt for a 2nd hand Kinect. With an IR blaster I guess it'll need a TV remote input or will everything come on if I turn on my One controller? That's what I want to try and achieve. 

1 hour ago, Audioboxer said:

For example when I turn my Nvidia Shield TV or PS4 on my TV and audio system will come on. Same with PS3. Or if I'm watching TV and push the PS button on my DS4 it will automatically go to the PS4 menu.

 

When I turn my One on I need to manually turn on TV, and then set it to the right HDMI input. Bit of a PITA :(

Imagine the days when you had to get up walk over and turn a knob just to change the channel.  You didn't need to worry about what input it was on because there weren't any, just channel 3 for the VCR.  Not sure if that qualifies as a capitalized pita.

12 minutes ago, daorbed9 said:

Imagine the days when you had to get up walk over and turn a knob just to change the channel.  You didn't need to worry about what input it was on because there weren't any, just channel 3 for the VCR.  Not sure if that qualifies as a capitalized pita.

Well we don't live in those days now and for someone used to it all just working automatically I don't see why something not adhering to that "norm" for me can't be classed as a PITA for me. Not really bothered if others don't care. 

  • Like 2
1 hour ago, daorbed9 said:

Imagine the days when you had to get up walk over and turn a knob just to change the channel.  You didn't need to worry about what input it was on because there weren't any, just channel 3 for the VCR.  Not sure if that qualifies as a capitalized pita.

My dad had a length of bamboo for such duties :laugh:

  • Like 1

CEC is such a rotten mess, hardly anyone supports "actual" CEC, but CEC "compatible" proprietary variations.

 

trying to get all the different systems to play well together when you set up  systems for people is a nightmare. easiest solutions is to turn them all of and tell them to just use the remotes, as even when they work if they have a decently capable TV and receiver they'll need the remotes for them anyway, that or a harmony. 

1 hour ago, HawkMan said:

CEC is such a rotten mess, hardly anyone supports "actual" CEC, but CEC "compatible" proprietary variations.

 

trying to get all the different systems to play well together when you set up  systems for people is a nightmare. easiest solutions is to turn them all of and tell them to just use the remotes, as even when they work if they have a decently capable TV and receiver they'll need the remotes for them anyway, that or a harmony. 

Maybe if you have a lot of different systems then I guess. I've only had Sony/Panasonic, then Panasonic/Panasonic, and now Sony/Sony for my TV/receiver combos (with the additional Amazon/Nvidia products inbetween). All worked fine together. If it's something MS can patch into the One I don't see why they wouldn't considering they've cut Kinect. If it's hardware based then obviously that's a no go. An IR blaster or a Kinect is just another device/wire I need to have around to do something I'm not used to being a luxury or additional expense.

 

For what it is worth my parents are rolling with an LG/Sony combination fine.

 

Your mileage may vary, but I can't call something a mess that's worked perfectly for me for years and helped enabled me be a lazy ass with no need for an expensive all in one remote.

  • Like 1
6 hours ago, Audioboxer said:

For example when I turn my Nvidia Shield TV or PS4 on my TV and audio system will come on. Same with PS3. Or if I'm watching TV and push the PS button on my DS4 it will automatically go to the PS4 menu.

 

When I turn my One on I need to manually turn on TV, and then set it to the right HDMI input. Bit of a PITA :(

Nope, and neither did the 360. PS3 / 4 have spoiled us :p

  • Like 1
4 hours ago, jasondefaoite said:

Maybe the xbox 1.5 will support CEC. But it is confirmed the Xbox One does not.

So it definitely needs hardware support? Thought it could just be patched in. 

4 hours ago, Audioboxer said:

So it definitely needs hardware support? Thought it could just be patched in. 

From what I read it can't be added via software. I think they would have done it already if it was possible as it has been requested by a lot of people.

16 hours ago, Audioboxer said:

I'm assuming they could patch in support though now that Kinect isn't mandatory? 

 

I'll probably opt for a 2nd hand Kinect. With an IR blaster I guess it'll need a TV remote input or will everything come on if I turn on my One controller? That's what I want to try and achieve. 

CEC most probably a software problem and patchable.

 

ir blaster can turn everything on when you turn your xbox on with the controller. but if you're on another input, you would have to manually change it.

  • Like 1
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
    • Imagine you still haven't discovered Total Commander that is doing all those things for three decades already...
    • This sounds like underneath the nice marketing spin, either someone at Adobe got tired of their lazy devs and asked Microsoft to help them sort at least some of Adobe's ancestral spaghetti code to make it go faster, or Microsoft wanted Adobe's crap to run better on Windows to make it look better when compared to Apple, so they offered to intervene. Either way, GOOD.
    • My favorite file manager for Windows 11 finally gets a long-requested feature by Taras Buria Files is among the best File Explorer alternatives for Windows 10 and 11. This free app is packed with all sorts of features and conveniences, but there is one crucial feature that is still missing—Tree View. Fortunately, the latest update in the Preview channel finally delivers it. With version 4.1.4, which is now available for download in the Preview channel, developers implemented Tree View, a new mode that displays folders in an expandable hierarchy. Windows 11's stock File Explorer always had this feature, but it was nowhere to be found in Files until now. Starting with the latest preview update, you can expand each drive and its nested folders without leaving the current location and then open the folder you need in the main view. To try Tree View in Files, update the app to the latest preview version, then click the small arrow next to a drive to expand its content. The developers say they are rolling out Tree View in Preview first to gather feedback from users and improve the feature before bringing it to all in the stable channel. In addition to Tree View, Files 4.1.14 improves the Windows Fonts folder. You can now preview each font directly in Files with no need to open the built-in font viewer. For now, these two features are only available in the Preview channel. For those using the stable release, developers recently released version 4.1.3, with improvements for the built-in tag system, on-demand folder size calculation, and plenty of various fixes. You can check out the full release notes here. You can download Files from the Microsoft Store (paid version) or its official website (free).
    • Who is paying for this 30x scale-up? Its sounds expensive.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!