Recommended Posts

The real surprise is the mass-to-LEO number for ITS. It's now expected to max out at 550 mT (for anyone who hasn't read the revised .pdf, here, Fig.7 on page 6).

 

What can be attributed to this improvement? Only SpaceX can say right now, but I assure you that it's not only gonna be an improvement in the engines. That's one factor, but not the only factor.

 

What does this mean? Raptor's a darn good engine. SpaceX wants to capitalize on that strength -- and they should -- but SpaceX needs to be careful not to overstate or oversell. I'm urging, if anything, for SpaceX to do what it does best: unique and innovative design, great Engineering, achieve feats once thought impossible, but don't shoot themselves in the foot by "being the hype".

 

I'm a Disciple in the Church of Elon too ... but what's needed now is speaking truth to power. :yes: 

  • 1 month later...

Blows the 12-Meter speculation out of the water. Okay then. Expect ITS-Junior to be Saturn-Class with a 25% bump in lifting power. And that's going to be for LEO/GTO ops, and lighter-duty TLI+.

 

(Heh ... "lighter-duty" ... lmao ... relative to ITS proper.)

Oh ... my ... giddy ... Aunt ... :woot::yes::D

 

ITS Junior is gonna be something truly special, folks. Just when ya think you've read it all, heard it all, and seen it all ... 

 

Okay picture this: what ITS is going to do for Mars and Ceres (and likely elsewhere), Junior is going to do for the Moon and Earth SOI stuff ... at DOUBLE the passenger capacity. That's right, because of the short amount of time Earth SOI (sphere of influence) flights will take, namely a few days at the most, ITS Junior will be set up more like a "passenger carrier" than anything else.

 

I wanna buy a ticket. :D 

The guys at NSF have taken to calling the subscale launcher ITSy (implication being BITSy is the Booster or Big ITS).

 

The net lift of ITSy will depend on the thrust of the first generation Raptors, and how many they pack into its 9 meter core. Assuming they keep the 7 engine center cluster from BITSy for commonality, the engine count comes down to the number in the outer ring. This could be any number up to perhaps 14 (yielding 21 engines) or so. I'm of the opinion this will be an even number so if an engine fails thrust balancing can be done by shutting down the opposite engine; KISS.

 

Pick a number, then make your bets for September 29.

 

  • Like 2

Wow. That'll keep the thrust numbers above Saturn-V's output by a LOT too. My subscription at NSF ran out and I haven't renewed yet, so I don't have access to any of this info right now.

 

[EDIT] Well, I was going to say that 21 was too many. I almost hit 'submit reply' with my guesstimation that put the engine count at 18 ... then I thought about it a little more.

 

If SpaceX uses a 2:1 scheme at 9 meters, that would give them room to do all of the sensors, thermal stuff, plumbing, etc that they'd need to do for the lower ring including whatever hardware they'd need for the landing cradle. Then I thought about "well, what would go in the center of the ring?" .. three more engines. Brings the count up to 21.

 

So, 21 engines is completely plausible. It'll be a really tight fit, no doubt, but it's do-able. And who's gonna argue with 14,490,000 lbf of thrust (a 49.38% increase over Saturn V)??

That evaluation isn't L2, it's been public side.

 

Even if this vehicle isn't as tall as Atlas V or SLS it could potentially out-lift them, depending on the engine count etc.

 

OTOH, they may go for a lighter class launcher, say 100 tonnes or so. 

 

Coin flip.

I see. Okay.

 

Even if they limit the count to 16, it'll still be cranking out 11,040,000 lbf at launch. If we factor in the massive improvements in weight reduction (materials used in construction, etc), it'll absolutely outperform anything and everything before or since from an efficiency standpoint. I think it'll even do better than the Falcon-9. :D 100 mT will be easy for it to push uphill.

Yessir. :yes: Entire orbital planes launched at once, up to and including constellations in a single go if the birds are light enough and there's enough fuel for the 360-degree inclination changes that are needed to pull it off. Granted, it'd get easier as the birds are deployed (less fuel needed per inclination change).

 

I could see OneWeb being launched like this as sort of a proof-of-concept to demonstrate the potential of ITSy. :D Only thing that would limit it is the space to put all of the birds inside the S2, really.

There is discussion of adding a second launch mount on LC-39A for ITSy (the 9 meter ITS). This would be positioned closer to the flame trench outlet, and would be fed rockets by a new ramp and very large hangar at up to 90° to the existing F9/FH ramp.

 

The concept came out of the black of L2 in an article by Chris Bergin of NASASpaceFlight.com about LC-39B, and was picked up by Teslarati.com - which also published concept images,

 

NSF (the LC-39A stuff is in the last half, but the entire article is worth the read!)

https://www.nasaspaceflight.com/2017/07/installation-flame-deflector-sls-begins-39b/

 

Teslarati

https://www.teslarati.com/spacex-florida-launch-pad-falcon-mars-vehicle/

Edited by DocM
  • Like 1
  • 4 months later...
  • 1 month later...

They go on to talk about this being a sign of  BFR flights from Boca Chica rather than Cape Canaveral, but that's not so because a second BFR factory is in the works for the Cape. More likely they'll fly the beasts from both.

 

Google Map....

 

https://www.wired.com/story/spacex-gears-up-to-finally-actually-launch-the-falcon-heavy/

 

Quote


>
WIRED has learned that SpaceX is actively considering expanding its San Pedro, California facility to begin manufacturing its interplanetary spacecraft. This would allow SpaceX to easily shift personnel from headquarters in Hawthorne.
>

 

San Pedro, CA ASDS Just Read the Instructions ops site

 

Screenshot_20180201-224315.thumb.jpg.888cb0d36b2ec4661105bc38f732ebfc.jpg

 

  • Like 1

Yeah ... unless they're planning to fly cargo BFR/BFS from Vandy -- or if they're seriously going to pursue point-to-point BFS Passenger travel. Then they'd need as much mfg capacity as possible.

 

I still think that they're going to do some component fab work there, then ship out to the other places for assembly. There's stuff that can only be done at Hawthorne after all, at least right now.

Are you guys familiar with Curious Droid and his YouTube channel?  A really good, fact based channel about all things space.  He's just done a fascinating video about the history of manned Mars missons since the start of rocketry.  Take a look if you have a spare 14 minutes!

 

 

YESssssss.....

 

US Department of Commerce OSC is getting on board for NewSpace Earth? Point-2-Point transport.

 

This goes along with the first National Space Council meeting where the Secretary of Transportation and others showed a high interest.

 

 

  • Like 1
  • 1 month later...

SpaceX's Paul Wooster, Principal Mars Development Engineer, will be giving an MIT talk,

 

"Beyond the Cradle 2018: Envisioning a New Space Age"

 

Saturday March 10, 2018 at 1330 Eastern. 

 

https://www.media.mit.edu/events/beyond-the-cradle-2018/

 

Livestream (Track A)

 

http://legacyweb.media.mit.edu/events/medialabtalk/

  • Like 1
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I don't hate the new menus, I am not a fan of the lack of features and how they went live when they clearly are not complete. The menu itself presents much better than the previous - but what's lacking (IMO) is: 1) Any kind of automated manipulation such as: "this goes on the new menu because you use this feature more often on this filetype" "this is rarely used and will fall back to the old menu" 2) Any kind of user manipulation such as: "a UI to add/remove/order items to the new menu"
    • The biggest issue in this version of Win 11 context menu, from usability standpoint, is the movable row with basic commands. Think of a car analogy...if You turn the week left the infotainment screen will move right and vice versa. With how it works now Microsoft made something forbidden in designing in any UI, software or hardware. I can't grasp who were the morons within Microsoft suggesting it was a good idea and gave it a green light.
    • LibreOffice 26.2.4 by Razvan Serea LibreOffice is the free power-packed Open Source personal productivity suite for Windows, Macintosh and Linux, that gives you six feature-rich applications for all your document production and data processing needs: Writer, Calc, Impress, Draw, Math and Base. Support and documentation is free from our large, dedicated community of users, contributors and developers. You, too, can also get involved! Choosing Between LibreOffice Still and LibreOffice Fresh: LibreOffice Still is a good choice if you value stability, a longer support cycle, and a more conservative approach to software updates. It's suitable for businesses and organizations where reliability and compatibility are crucial. LibreOffice Fresh is ideal if you're an enthusiast or an early adopter who wants to stay on the cutting edge of LibreOffice development and is willing to accept more frequent updates and occasional minor issues. Features: Writer is the word processor inside LibreOffice. Use it for everything, from dashing off a quick letter to producing an entire book with tables of contents, embedded illustrations, bibliographies and diagrams. The while-you-type auto-completion, auto-formatting and automatic spelling checking make difficult tasks easy (but are easy to disable if you prefer). Writer is powerful enough to tackle desktop publishing tasks such as creating multi-column newsletters and brochures. The only limit is your imagination. Calc tames your numbers and helps with difficult decisions when you're weighing the alternatives. Analyze your data with Calc and then use it to present your final output. Charts and analysis tools help bring transparency to your conclusions. A fully-integrated help system makes easier work of entering complex formulas. Add data from external databases such as SQL or Oracle, then sort and filter them to produce statistical analyses. Use the graphing functions to display large number of 2D and 3D graphics from 13 categories, including line, area, bar, pie, X-Y, and net - with the dozens of variations available, you're sure to find one that suits your project. Impress is the fastest and easiest way to create effective multimedia presentations. Stunning animation and sensational special effects help you convince your audience. Create presentations that look even more professional than the standard presentations you commonly see at work. Get your collegues' and bosses' attention by creating something a little bit different. Draw lets you build diagrams and sketches from scratch. A picture is worth a thousand words, so why not try something simple with box and line diagrams? Or else go further and easily build dynamic 3D illustrations and special effects. It's as simple or as powerful as you want it to be. Base is the database front-end of the LibreOffice suite. With Base, you can seamlessly integrate into your existing database structures. Based on imported and linked tables and queries from MySQL, PostgreSQL or Microsoft Access and many other data sources, you can build powerful databases containing forms, reports, views and queries. Full integration is possible with the in-built HSQL database. Math is a simple equation editor that lets you lay-out and display your mathematical, chemical, electrical or scientific equations quickly in standard written notation. Even the most-complex calculations can be understandable when displayed correctly. E=mc2. LibreOffice also comes configured with a PDF file creator, meaning you can distribute documents that you're sure can be opened and read by users of almost any computing device or operating system. LibreOffice also comes configured with a PDF file creator, meaning you can distribute documents that you're sure can be opened and read by users of almost any computing device or operating system. Download: LibreOffice 64-bit | LibreOffice 32-bit ~300.0 MB (Open Source) View: LibreOffice Website | Screenshot | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Amazon eero Pro 6E mesh Wi-Fi system 2-pack is 27% off by Ivan Jenic The Amazon eero Pro 6E mesh Wi-Fi system is currently $239.99 on Amazon for the 2-pack, down from $329.99. That's 27% off and $90 saved for a solid Wi-Fi solution that covers your entire home (purchase link down below). The 2-pack covers up to 4,000 square feet (372 square meters) and supports 100+ connected devices, which handles the vast majority of home setups without breaking a sweat. Wi-Fi 6E brings access to the 6 GHz band for lower latency across the network, and the 2.5 Gb Ethernet port supports gigabit+ internet plans if your ISP offers them. eero's TrueMesh technology handles traffic routing automatically, so you're not manually managing which devices connect to which node. You set up the entire thing through the eero app, and the entire process takes a few minutes. The system also receives automatic security updates in the background, so once you set it up, you don't have to worry about compatibility issues. If you're covering a larger home or want more nodes, the 3-pack is $329.99 and the 4-pack is $479.98, both at similar discount levels. It's worth mentioning that a newer model exists, which is likely the reason for the discount, but the Pro 6E is still perfectly capable hardware for most homes. Amazon eero Pro 6E mesh Wi-Fi system 2-pack - $239.99 | 27% off on Amazon This Amazon deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      484
    2. 2
      PsYcHoKiLLa
      258
    3. 3
      Skyfrog
      84
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      63
  • Tell a friend

    Love Neowin? Tell a friend!