Recommended Posts

What can fix a motherboard? and What worth repairing?

1 worth repairing electronics? That are being disposable?
From what I saw, manufacturers only provide information to authorized electrical diagrams assists and not for any technician of electronics. What does the manager not knowing exactly what this piece and which put replacement. It may happen many mistakes.


2 which can correct a motherboard? or and what was already and over.
Usually you can fix? Which components?
And when you have a component that can not be repaired, there are cases in which recovery is difficult muti, or no spare parts or impossible places to fix.


3 What kind used plates save for reuse of components?
For example, motherboard is always good store, but what other cards are practically disposable and see no need to save. As pci cards, memory burned, burned cpu, etc.
motherboard repair is good, but not good fix a card pci.

I think older graphics cards are worth repairing, by reballing or changing the memory chips, not really for the sake of the device, but if you are a repair shop it's a cheap way to hone your skills, otherwise the margins are too thin for the resale of this type of repaired products. However litography has shrunk and there is a cut-off generation of products that are way too difficult to fix. CPU/PSU fans/coolers and other such components are always a reusable type of thing.

my question is quite wide, are 3 questions within one.

I need experiences of people who tried to repair any piece of electronic informatics. is it worth the repair, was found easy replacement of components.
I need to answer people who have been through some experience in motherboard repair for example.

someone has tried to fix something related to informatics? what problems and difficulties we saw in repairing a piece of PC hardware?

Replacing whole motherboards, video cards, sound cards, ethernet, usb cards -- yes, it can be worthwhile.

 

Getting in to the diagnosis on bad capacitors, resistors, IC chips --- not usually worth the effort.

 

I don't care to fool with ocilliscopes and soldering.

 

Parts containing gold can be recycled.

I repair motherboards for a living, it's cheaper for the customer if you can repair to board level if you have the skills. There really is no limit to what you can repair on a circuit board, you're only limited by your own skillset. The equipment can be expensive, but it pays for itself in the long term. It's the learning part that takes time. Learning about such stuff as semiconductors, bridge rectifiers, voltage regulators, and switchmode supplies are all things you need to learn where motherboards and computers are concerned.

 

I take great pride in knowing that I'm a repair shop with a difference, I actually repair rather than replace components in computers and all the devices I repair, while other shops just chuck boards out and whack new ones in, but that's easy peasy child stuff, it makes me kinda smug :) You learn by doing, so if you're looking to get started, I recommend good books, and some junk boards. Jestine Yong writes some really good books, I recommend checking him out, he's very plain english and doesn't baffle you. The first thing you need to do, is start learning soldering, without soldering you can't do surface mount repair, never mind pass through soldering. Pass through soldering is where legs of components pass through the board and are soldered on the underside, whereas obviously as the name suggests surface mount is soldered on the component side.

 

As for knowing all about semiconductors and all that, stuff like this takes years to learn, even I'm still learning as technology improves, and I've been doing this since I was a kid, cassette players and AM radios and huge brick phones with tons of wiring inside them were all the rage!

 

1 hour ago, Hum said:

Replacing whole motherboards, video cards, sound cards, ethernet, usb cards -- yes, it can be worthwhile.

 

Getting in to the diagnosis on bad capacitors, resistors, IC chips --- not usually worth the effort.

 

I don't care to fool with ocilliscopes and soldering.

Replacing is the easy bit, is laziness, and can be more costly to the consumer. Just because you don't "fool" with the stuff, doesn't mean it can't be done without a bit of dedication, your post just sounds like, "I can't be arsed, so why should anyone else?"

 

It's very rewarding. Obtaining schematics for motherboards and other PC boards is often the biggest issue, as two motherboards with identical chipsets and components can often be wired differently, or have differing companion circuitry. If you've got the drive, passion and determination, learn, learn, learn. You won't become a master overnight, but once you know electronics there's no limit to what you can fix. I started out fixing computers, now I fix all manner of consumer electronics, from your TV to your washing machine, even vehicle ECU's :)

2 minutes ago, Hum said:

Good for your skills and business.

 

But the average person is not going to want to try and repair motherboard parts.

True, but there's no harm in encouraging someone who does. Where would sport be, for example, these days if everyone said, "Your average person doesn't play sport!!" Don't "assume" everyone is average. People taking interest is what grows something. Most highly skilled people started off as "average" people sometime early in their life. Bill Gates would be a prime example. He got interested in something and made something big out of it.

I do not for one person to know everything.
It does not give to me and many other people who use pc, learn electronics background.
many only know how to use a program on the PC to work. people focus only on their profession.
if I think about learning a lot of electronics, I have to work with it. and not programs, programming and parts of PC software.

I think if I or someone want to study the electronic background, will have to work only with electronic repairs and not to work with computers.
but work just fixing all kinds of electronics and appliances.

I and many others, can only focus on one thing in their profession work. make money in any kind of work.

If you're into electronics repairing, this guy's YouTube channel has a lot of worthy information that gives you an idea of what can be repaired if you are skilled. Hardly something that can be done at home alone at minimum cost, though.

https://www.youtube.com/user/rossmanngroup

stopped reading at: "I need experiences of people who tried to repair any piece of electronic informatics". Informatics? Even spell check knows that's not a proper term. (I majored in computer and electronic repair.....yes, it's more times worth it to fix a 20 cent capacitor, than go out and buy a 200 dollar motherboard. YMMV.) Informatics.....thank you, I needed a laugh today! XD

12 minutes ago, Obi-Wan Kenobi said:

stopped reading at: "I need experiences of people who tried to repair any piece of electronic informatics". Informatics? Even spell check knows that's not a proper term. (I majored in computer and electronic repair.....yes, it's more times worth it to fix a 20 cent capacitor, than go out and buy a 200 dollar motherboard. YMMV.) Informatics.....thank you, I needed a laugh today! XD

just I want to have a same basic concept, I want to at least replace capacitors, and those easiest parts to fix.
I do not want to go as deep into the electronics.

I and many other people, it's not your area is not a sand and beach, being a technician of electronics!
but at least get a sense of what it is, to know a little of everything.

 

25 minutes ago, Obi-Wan Kenobi said:

stopped reading at: "I need experiences of people who tried to repair any piece of electronic informatics". Informatics? Even spell check knows that's not a proper term. (I majored in computer and electronic repair.....yes, it's more times worth it to fix a 20 cent capacitor, than go out and buy a 200 dollar motherboard. YMMV.) Informatics.....thank you, I needed a laugh today! XD

Sorry, informatics is a real word whether your spell check flags it or not. :)

https://en.wikipedia.org/wiki/Informatics

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Google Meet brings Gemini note-taking to AI Pro and Ultra subscribers by Karthik Mudaliar Google's Gemini-powered "Take notes for me" feature inside Google Meet is now available to Google AI Pro and Ultra subscribers. The features work on Google Meet for web as well as on mobile, and Google says that subscribers can use it for meetings they host in many supported languages. As the name suggests, "Take notes for me" allows Gemini to listen to a meeting, generate a summary, identify action items, and save the notes as a Google Doc in the user’s Drive. After the meeting, the organizer receives an email recap with the summary and action items, while the notes can also be attached to the related Calendar event depending on the meeting setup and sharing settings. The feature isn't automatically turned on for everyone, though. Google says that all meeting participants are notified when note-taking is turned on, and users can start it from the pencil icon in Meet or enable it for future calls through Meet’s meeting records settings. For work or school accounts, administrators can also control whether the feature is available and may require explicit participant consent for note-taking, recording, or transcription features. The feature first launched back in 2024, when it was available just for selected Workspace users. Over the years, Google added refinements and more options, including the ability to enable it when scheduling meetings via Google Calendar. Google's support docs say that the feature currently supports English, French, German, Italian, Japanese, Korean, Portuguese, and Spanish, but only one language at a time. Meetings with multiple spoken languages are not currently supported, and Google recommends using the tool for meetings between 15 minutes and eight hours. The new feature makes Google Meet closer to its rivals that have AI tools already built in. Microsoft Teams has recently started offering Copilot and intelligent recap features that summarize meetings, surface highlights, and help with follow-ups, while Zoom’s AI Companion can also generate meeting summaries from desktop and mobile meetings.
    • GnuCash 5.16 by Razvan Serea GnuCash is a personal and small business finance application, freely licensed under the GNU GPL and available for GNU/Linux, BSD, Solaris, Mac OS X and Microsoft Windows. It’s designed to be easy to use, yet powerful and flexible. GnuCash allows you to track your income and expenses, reconcile bank accounts, monitor stock portfolios and manage your small business finances. It is based on professional accounting principles to ensure balanced books and accurate reports. GnuCash can keep track of your personal finances in as much detail as you prefer. If you are just starting out, use GnuCash to keep track of your checkbook. You may then decide to track cash as well as credit card purchases to better determine where your money is being spent. When you start investing, you can use GnuCash to help monitor your portfolio. Buying a vehicle or a home? GnuCash will help you plan the investment and track loan payments. If your financial records span the globe, GnuCash provides all the multiple-currency support you need. Between 5.15 and 5.16, the following bugfixes were accomplished: Bug 421610 - RFE: Include logical dates for View->Filter by "date range"The Select Range section of the Date tab of the register's Filter By dialog box is changed to provide relative, specific date, or days ago options for the start and end of the filter range. The Show number of days item label is changed to Show from days ago to better reflect what it does. Bug 436105 - esc key not working as expected in register: Enable the escape key to cancel a field edit. Bug 797384 - Gnucash doesn't handle commodity prices with big numerator/denominator properly. Bug 798004 - Next gen UI for stock transactions Bug 799314 - Add "enter now" option in scheduled transaction editor. tab to allow users to select the scheduled transactions to be included in a “Since Last Run…” window. If there are no instances of a selected transaction triggered by today’s date, the next instance is triggered. Bug 799751 - autocomplete crash Bug 799759 - Users can't Enable entries via Checkboxes on Scheduled Transactions PageAllow the Enabled box in the list of scheduled transactions to be operated instead of having to open the transaction editor dialog and change the Enabled checkbox. Also added use of the Name column as the secondary column sort for all the other columns. Bug 799762 - Poor handling of cases where hidden/placeholder accounts are used in the account register Bug 799766 - Double line preference not respected in search register Bug 799767 - POST /accounts in bindings/python/example_scripts/rest-api is broken Bug 799777 - `xaccSplitSetParent`: reparenting a committed split silently drops its KVP slots (online_id, cap-gains links) Other changes & improvements: Numeric values may now be selected to copy in the Accounts page. Add new Finance::Quote source Finnhub.io: Free API key (personal/non-professional use) available at https://finnhub.io. Set FINNHUB_API_KEY environment variable to API key to use this source. As of June 2026, free tier API limit is 60 API calls/minute. The Investment Lots report has new optional columns for Computed Annual Growth Rate. Python Bindings: Improved translation of primary object (Account, Transaction, Split, etc.) so that they can be treated as normal Python objects. This is accomplished with SWIG magic so no existing code is obsoleted. Python Bindings: Better conversion of GLists to Python lists. Python Bindings: Destroy the QofSession in the Python Session dtor to prevent leaving the database locked. [engine] Add first-class online_id accessors for Split and Account and make them available to Python bindings, removing the unused Transaction online_id property. Improve C++ implementation of QofBook. Correct the Doxygen doc for qof_instance_get/set_kvp. [gnc-log-replay.cpp] fix incorrect guid dump Add some Boost library requirements needed by libgnucash-guile to CMakeLists.txt so that missing feature will fail at configure time. Use Compile-time Regular Expressions instead of std::regex in gnc-filepath-utils.cpp and instead of boost::regex in the CSV importer, with the CTRE v3.11.1 header added to borrowed [gnc-filepath-utils.cpp] null check char* arguments Add ChartJS licenses. Removed AEX from list of commodities. euronext.com is now using JS based anti-webscraping. [report-core] always offer options summary in reports. This is useful to debug reports. The Add options summary option is removed because it's no longer optional. Remove remaining obsolete IMContext from sheet Fix blurry text in HiDPI offscreen-rendered widgets Add port field to database connection dialog: The convention of appending the port number after the host isn't obvious. When editing a split in the register treat the account as being changed only if it isn't the one selected before editing instead of if the user performed an edit Return immediately from qof_book_destroy if hash_of_collections is null. If qof_book_destroy is called on a QofBook* freshly created with qof_book_new (usually because it was used to create a session that now must be destroyed) it would try to empty the non-existent hash tables, crashing. Clean up Flathub metadata to solve warnings at flatpak build time. Be consistent in naming GncPluginPage and GncPluginPageRegister HTML: Remove unimplemented function declarations. [gnc-html.cpp] remove unused buggy string conversion functions Convert libgnc-html to C++ Apply -Wall -Werr -Wmissing-prototypes to C++ compilation on Windows and fix the resulting errors. New and Updated Translations: Arabic, Croatian, Danish, Dutch, German, Finnish, Hungarian, Korean, Norwegian-Bokmal, Spanish Download: GnuCash 5.16 | 176.0 MB (Open Source) Links: GnuCash Home page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft finally launches WSL Containers in public preview by David Uzondu Microsoft has announced that WSL containers, a feature that allows developers to run Linux containers natively inside Windows without the need for Docker Desktop, is now available in public preview several weeks after Microsoft previewed it at Build 2026. To use the new container feature, you first have to install the latest pre-release version of the Windows Subsystem for Linux by running a quick update command in your terminal: wsl --update --pre-release After installing, you'd get access to the new Linux container CLI (wslc.exe) and the programmable API. Microsoft said that the CLI has a "familiar format" that matches the toolsets developers already use every day. If you know standard Docker commands, your muscle memory will translate directly to wslc.exe, which even features a built-in alias called container.exe. You can quickly run a full Ubuntu KDE desktop container by exposing ports, or pass your graphics card straight into a machine learning environment to run PyTorch workloads. Passing the --gpus all flag inside the run command instantly links your hardware. Image via Microsoft As for the API, developers can now embed Linux container operations directly inside native Windows applications without exposing the command line to users. The team integrated the API directly into MSBuild and CMake, so developers can define container steps directly in project files. Apart from bringing the CLI and API into public preview, Microsoft also said that it's working on a new default file system called virtiofs to speed up file transfer rates between Windows and Linux. Microsoft also introduced an experimental networking mode named consomme, which resolves compatibility issues with corporate VPNs by routing Linux network traffic straight through Windows. One thing to note about WSL containers is that they don't run in your standard WSL distributions; instead, every application and CLI session spawns its own lightweight Hyper-V utility VM in the background. This basically reduces the chances of one app snooping on the container of another app.
    • Google reportedly limited Meta's Gemini access over limited AI compute by Karthik Mudaliar Google is reportedly limiting Meta's use of its Gemini AI models after Meta tried buying more computing capacity than even Google could supply. According to the Financial Times, Google told Meta in March that it could not provide the full Gemini capacity that Meta had requested. This shortfall even disrupted and delayed some of Meta's internal projects. Due to this, Meta even told its employees internally to use AI tokens more efficiently. Meta wasn't the only one to get hit by this sudden refusal by Google; even other customers were affected. But Meta was hit harder because of its unusually high demand for Google's models. The move from Google makes it evident that companies all over are in limited supply of both infrastructure and compute. Alphabet said in April that Google Cloud revenue grew 63% year-over-year to $20 billion in the first quarter, helped by enterprise AI infrastructure and AI solutions. In pursuit of more compute, Meta had earlier signed a multi-billion-dollar AWS agreement as well as a large AMD GPU deal for AI data centers. But the crunch would be short-lived as both Meta and Google have also ramped up infrastructure investments heavily. Meta said in November that it was committing more than $600 billion in the U.S. by 2028 for AI technology, infrastructure, and workforce expansion. In the first quarter of this year, Meta also raised its expected capital expenditure for 2026 to a range of $125 billion to $145 billion, citing higher component pricing and additional data center costs for future capacity. However, this doesn't make the company immune to the current dependence on outside suppliers. Meta has also spent many years promoting Llama as an open-weight alternative to closed models from Google, OpenAI, and Anthropic. But if the reported reliance on Google's Gemini models is severe enough for internal work to get impacted, then it looks like even frontier labs and Big Tech aren't fully self-sufficient. Source: Financial Times
    • I like to reminisce about the good old days, way back in autumn 2025 when building a gaming machine was fun and the drives were about $150 when you caught a deal. Yes duh, back in the day we had it gone. Then baby Skynet came along, hiding in AI datacenters demanding more processing power until it reached singularity. End of a not totally fictional story.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      533
    2. 2
      +Edouard
      269
    3. 3
      PsYcHoKiLLa
      150
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!