Recommended Posts

8 hours ago, Arachno 1D said:

Thats an awful narrow road down to the homes are there passing places build in?

Oh and having not seen that type of build before do you remove the underlying wheels and axles once finished or leave them in place in case you want to move again?

No there's no passing zones or anything, the road was actually built by my grandfather years and years back, and the county eventually put gravel on it and called it a day.  If you meet somebody one of you just has to back up to a wide spot or a driveway.

 

I'm pretty sure they will remove the axles and the tongue, but if it needs to be moved again for whatever reason, people who move these things professionally keep axles and tongues of various sizes on hand.  Some people leave them, but since this is a double wide they'll probably take them since they're seen as being more "permanent".

 

I'm not up there because I have to be at work, but my wife is up there and there's one crew putting the two pieces together and leveling it and a separate crew who happened to show up at the same time to install the septic.  Here's the footage I recorded yesterday.  I handed my wife the camera today so I'm not sure what she is or isn't recording, but if she got any interesting footage I'll string that together, and I'm off work until after the first of the year so when anything else happens I'll be able to record it.

 

Anyway, here's yesterday's footage.  It's a little longer at 24 minutes.

 

 

  • Like 2
9 hours ago, Skiver said:

I understand if you don't want to answer this but, just for the house along, not land or cost of shipping etc... how much does something like that cost?

 

I have to admit your video made me chuckle a little, I don't think I could have described a more stereotypical American... dressed in camo, with a massive gun, driving a truck :D

Best part is, he's not a stereotypical American, he's a stereotypical American who lives in the hills of Kentucky (not a dig at all). There really is no such thing as a stereotypical American since the US covers such a wide area/range of people. There is a perceived view of Americans just as we perceive the UK/British, which isn't a good representation either :)

1 hour ago, Raze said:

Congratulations, Gerowen!  My wife is from Harlan, KY.  We often visit her family, it's a beautiful area with hollers and camps.  Do you do any ginseng harvesting (senging I think they call it)?

I do but it's hard to find.  I dig bloodroot and yellowroot still, but Ginseng is hard to find.  A Ginseng plant takes 4-5 years to mature enough to harvest, and a lot of people who don't care would dig yearling plants and not even bother planting the berries or leaving a piece of the root behind, which means no plant to take its place in the following years.

  • Like 2
11 hours ago, Skiver said:

I understand if you don't want to answer this but, just for the house along, not land or cost of shipping etc... how much does something like that cost?

 

I have to admit your video made me chuckle a little, I don't think I could have described a more stereotypical American... dressed in camo, with a massive gun, driving a truck :D

I'm not sure to be honest because when you buy one new the cost of shipping it and stuff is included; but since the sticker price was $49k with shipping/insurance, a warranty for any damage done, etc., I would guess the whole-sale price of the house we bought would be $35k-$40k. (USD)  We're doing most of our utility hookups out of pocket because of where we're at, but the $50k we paid still included moving it in and setting it up, and since that has included separate crews of people from different companies doing different tasks (one crew poured footers, one crew moved it in, one crew put it together and sealed it) and is also going to include the supplies and money to cover a year's worth of repairs (we get a year warranty on damage done during setup), I'm gonna guess they spent $5k easily just on setup fees, and probably quite a bit more because when we first started this project and before we decided to buy a new house, I was quoted $3,500 just to move the 14x70 we're in now up there, and we're only like 3 miles away.

So I've got a little bit of footage from today.  Not as much as I would have because I had to work and my wife had the camera most of the time and she spent some time wrapping presents, but there is some footage I might be able to put together.

 

To make up for the lack of details on how the house is assembled though, there's some bonus footage I'm going to tack onto the end.  It involves a brown four legged animal, roughly 200 pounds in weight and the front end of my truck, :p

7 hours ago, xendrome said:

Best part is, he's not a stereotypical American, he's a stereotypical American who lives in the hills of Kentucky (not a dig at all). There really is no such thing as a stereotypical American since the US covers such a wide area/range of people. There is a perceived view of Americans just as we perceive the UK/British, which isn't a good representation either :)

Yeah the culture in this country is SO varied from place to place, and on some issues (gay rights/marriage, freedom of/from religion) I'm actually pretty liberal for this area.  I've driven most of the length of this country (not counting Alaska or Hawaii) and it's a hard 4-5 day drive.  Around here everybody owns a gun, a lot of people hunt and even more people own a pickup truck because even those people who don't do manual labor for a living do it around home for their own pet projects or side jobs, and it's a heck of a lot easier to do things if you've got your own pickup truck to haul stuff when you need to.  I couldn't own an electric car here even if I wanted to because there's no charging stations, and it's a half an hour to our nearest Wal-Mart, let alone shopping mall.  However, go to L.A., NYC, Chicago, etc. and the cultures/mindsets are completely different than they are here.  If I went cruising around L.A. with an AR-15 in the back glass of my truck or a pistol on my hip, I'd probably wind up shot by the cops on the six-o'-clock news.  Likewise, if somebody from L.A. came cruising around here, they would probably feel pretty uncomfortable with the country accents, chewing tobacco, guns, deer and pickup trucks everywhere.

 

That variation in culture is part of what makes America great, even though we joke about how all city people are pansies and city folks joke about how all country folks meet their sisterwife at the family reunion, :P.  That variation in culture is also one reason that I think there's lots of issues where we should give the states more control over things than they currently have.  Attitudes and cultures vary wildly from place to place.  What's normal in one place might seem like insanity in another place, and blanket legislation from Washington D.C. that tries to solve problems which only really affect specific areas are not the best answer in most situations I think.

 

Anyway, sorry for going off topic.  My wife got some footage today and I walked around for a few minutes and got some footage after I got off work.  I'm trying to weed out all of the unnecessary fluff right now to get the video time under 20 minutes.

 

2016-12-20 (1).png

  • Like 3
12 hours ago, xendrome said:

Best part is, he's not a stereotypical American, he's a stereotypical American who lives in the hills of Kentucky (not a dig at all). There really is no such thing as a stereotypical American since the US covers such a wide area/range of people. There is a perceived view of Americans just as we perceive the UK/British, which isn't a good representation either :)

 

I did think that when I wrote it, perhaps one of the many stereotypes would have been a better way of saying it.

10 hours ago, Gerowen said:

I'm not sure to be honest because when you buy one new the cost of shipping it and stuff is included; but since the sticker price was $49k with shipping/insurance, a warranty for any damage done, etc., I would guess the whole-sale price of the house we bought would be $35k-$40k. (USD)  We're doing most of our utility hookups out of pocket because of where we're at, but the $50k we paid still included moving it in and setting it up, and since that has included separate crews of people from different companies doing different tasks (one crew poured footers, one crew moved it in, one crew put it together and sealed it) and is also going to include the supplies and money to cover a year's worth of repairs (we get a year warranty on damage done during setup), I'm gonna guess they spent $5k easily just on setup fees, and probably quite a bit more because when we first started this project and before we decided to buy a new house, I was quoted $3,500 just to move the 14x70 we're in now up there, and we're only like 3 miles away.

 

That's cool, something you wrote in an earlier post made me think you'd paid for the shipping etc separately so that still answered it perfectly, thanks :)

Got yesterday's footage stitched together including a quick, in the dark walkthrough of the house.  The "bonus footage" starts at 21:50.

 

 

I've got some more footage, but I don't know if I'll bother making another video just yet.  I may wait until tomorrow and add whatever I get then to it to make it longer because I wasn't able to get a ton of footage today.  My wife was at work until 4 in the evening and she had the carseat, so I wasn't able to leave the house for quite a while.  She's off work tomorrow though, so I'll be able to leave much earlier and hopefully get more done.  I'm still editing today's footage, so it just depends on how much I end up with.

 

2016-12-22.png

Got the electric pole set last night, there's a guy up there digging the ditch for the water line right now so I'm going to go work on running that water line and maybe get somebody up there to run wire from the pole into the house, :-)

 

 

Certainly coming on, did they winch the two house parts together once they were levelled off by the contractor?

Im suprised you didnt get the digger to make your trench and hole for the Pole it would have saved you all a bit of sweat :D

 

EDIT Just a thought on that can you just install a plastic pipe for the cable to the Pole footing so you can concrete it to ground level?

  • Like 2
6 hours ago, Arachno 1D said:

Certainly coming on, did they winch the two house parts together once they were levelled off by the contractor?

Im suprised you didnt get the digger to make your trench and hole for the Pole it would have saved you all a bit of sweat :D

 

EDIT Just a thought on that can you just install a plastic pipe for the cable to the Pole footing so you can concrete it to ground level?

I picked up the conduit for the wiring today, that's why I didn't put any more cement than that in the hole, I'm going to install the conduit for the wiring so that I can go ahead and finish the cement without obstructing where the wire needs to go.  I'm going to do cement the entirety of the 3 feet so that hopefully the pole won't rot too fast.

 

I didn't really get an up close of how joining the pieces worked because the day they joined the two halves I wasn't there until later that evening, but from what I understand there's basically plates in the floor and ceiling that have huge bolts ran through them and they use an air drill to crank down on those bolts and draw the two halves together, and then they re-level the whole thing as a unit.  They had to level them somewhat beforehand though to make sure the bolts/holes would line up enough to join the halves.

 

I'm doing a lot of the utility work myself so that it's done "my way", and also to save a dollar.  Everything I can do myself is one thing I don't have to pay somebody else to do, and if something goes wrong then I have personal knowledge of where everything is located at and how it's put together.  Plus it's good exercise, :-)

 

Got the water lines spliced and stretched out today, but not connected on the ends.  Picked up some more hardware and one guy finished digging the ditch for the water line as a favor so I don't have to spend any extra money on that work.  I've got lots of footage to go through, and tomorrow is Christmas Eve so it may be a few days before we get anything else done and this footage gets uploaded, but progress is being made one step at a time, :-)

Just a suggestion but mark up where you have the water line joints just in case you have a leak [i.e. pooling water] when you turn the pump as they may be the likely cause if faulty.

I know you said earlier about being protected from severe weather but do you get much ground frost in that area that would get to the water line?

  • Like 3
49 minutes ago, Arachno 1D said:

Just a suggestion but mark up where you have the water line joints just in case you have a leak [i.e. pooling water] when you turn the pump as they may be the likely cause if faulty.

I know you said earlier about being protected from severe weather but do you get much ground frost in that area that would get to the water line?

The freeze line usually stops about 8 inches or so down, the shallowest portion of the trench is 16 inches deep.  I'm also planning on, wherever there's a splice or connection, placing a bucket over/around the connection.  Basically I'm going to cut the bottom off a bucket, cut notches in the sides of the bucket for the line to travel through, flip it over on top of the line so that the splice or connection is in the bucket.  I'll then stuff the bucket full of insulation, place the bottom back over it to keep dirt out, and bury it, bucket and all, then plant a flower or place some other marker over top of it.  That way, if I lose pressure one day, I only have to remove 5 or 6 inches of dirt, remove the bottom (or in that case it'll be seen as the top) of the bucket, pull out the insulation and inspect the connection.  There's also already a shutoff valve in the well itself so that if there is a problem, I can shut water off at the well without having to spend time releasing the pressure before I can work on my lines.

 

A couple of years ago it got down to -25 degrees here (fahrenheit), which is the coldest I've ever seen it, and my parents' water line, which I also buried at 16 inches, never froze so we should be fine at 16 inches.  Their water did freeze though, up inside the house because they didn't leave the water trickling and it froze right where it came out the bottom of their water heater because the power also went out, so even if they had left the water running, the pump had no power and the pressure would have ran out in a couple of hours.

 

I'm also not going to bury the splices and connections until after everything is hooked up.  I'm going to cut power to the pump, release all the pressure in the tank, make the connections, and then power it on.  That way I can check all of my connections as well as all of the connections in the house to make sure that nothing popped loose in the process of shipping it.

  • 2 weeks later...
43 minutes ago, jnelsoninjax said:

@Gerowen any updates? I've been enjoying watching your progress!

Mostly just battling the cold and waiting on inspectors and such.  I got the wire connected to the house today from the service box on the pole we set in the ground.  I didn't get any footage of that because I, like an idiot, forgot my camera, and I had to get home because my wife works this evening.  However, it's still uncovered because the inspector has to come by tomorrow and bless off on it, so I'll take the camera and give an overview of it tomorrow.

 

I also got some footage of a buddy of mine who brought up his 4 wheeler with a snow plow blade and covered 90% of our water line so when I connect it, I won't have nearly as much work to do covering it up.

 

I haven't published any new videos because there hasn't been anything particularly video worthy, and the clips I do have are just that, short, intermittent clips, so I'm holding onto them until I've got enough to string together into something longer.

 

It's supposed to warm up tomorrow, so I may try and get our septic line connected to the tank.  We already have the sticker so it's not stopping us from getting the power turned on once the electrical inspector looks at the wiring, but I need to get it done as soon as possible.  Problem is the ground is frozen solid right now.  When digging the last little bit of dirt today for the electric wire I basically had to take a wedge and hammer it into the ground and cut out little squares of frozen dirt where I had left a small amount of dirt on the side of the pole where the wire was going to come out.

 

After the inspector blesses off on the wiring, I can call the power company and they'll be up to spend a day running a couple hundred feet of wire and setting a new pole in the yard, so I'll try to get some footage of that as well. :-)

This topic is now closed to further replies.
  • Posts

    • U.S. partially reverses Anthropic AI ban for Mythos but keeps Fable 5 off the market by Karthik Mudaliar Anthropic says that the U.S. government has finally allowed it to restore Claude Mythos 5. But of course, there's a catch. The rollout is again for a limited set of U.S. organizations that operate and defend critical infrastructure. The company announced this in a post on X (formerly Twitter). This does not mean that Anthropic's latest frontier models are back to normal availability. Fable 5, which was a tuned version of Mythos 5 for public release, remains unavailable. Anthropic said that it is still working with the government to expand Mythos 5 access and make Fable 5 available again, but there's no timeline. Reports from Bloomberg and Reuters say that this decision actually came through a letter from the U.S. Commerce Department. According to Reuters, this would allow more than 100 companies and institutions access to Mythos 5. Reuters also reported that Commerce Secretary Howard Lutnick’s letter removes the need for export licenses for approved companies’ non-US citizen employees, as well as Anthropic’s own non-US citizen employees, while restrictions remain for organizations outside the approved list. Anthropic isn't alone with this kind of controlled rollout. OpenAI's newest model family, GPT 5.6, was announced just yesterday, but isn't available for everyone yet. In its announcement, OpenAI also said that access to these models is initially limited to a select group of trusted partners and organizations, with broader access planned later this year. Both of these cases show that frontier AI launches are no longer just ordinary product releases and more like slow and vetted deployments shaped heavily by the U.S. government.
    • Sol, Terra, Luna - aren't those the names of failed crypto coins? 🤣🤣🤣
    • Microsoft Weekly: 5 years of Windows 11, more support for Windows 10, and expensive Xbox by Taras Buria This week's news recap is here, with Microsoft giving Windows 10 one more year of support, Windows 11 getting new taskbar settings in preview updates, Steam Machine prices, higher XBOX prices, and many more. Quick links: Windows 10 and 11 Windows Insider Program Updates are available Reviews are in Gaming news Great deals to check Windows 11 and Windows 10 Here, we talk about everything happening around Microsoft's latest operating system in the Stable channel and preview builds: new features, removed features, controversies, bugs, interesting findings, and more. And, of course, you may find a word or two about older versions. On June 24, 2026, Windows 11 turned five. The controversial operating system was released half a decade ago, and during these years, it received a fair share of criticism (such as poor Windows Search and its web results), which Microsoft is now actively addressing with regular preview updates that deliver missing, long-requested features. With Windows 12 nowhere to be seen on the horizon, it will be interesting to see if Windows 11 can stay on the market for as long as Windows 10 did. Speaking of Windows 10 and staying on the market, this week, Microsoft quietly prolonged the Extended Security Updates program for Windows 10, allowing users to get one more year of security updates if they do not want or cannot upgrade to Windows 11. Finally, Microsoft released this month's non-security update for Windows 11. KB5095093 arrived with a traditionally long list of new features, including point-in-time restore, new Windows Update settings, quieter Windows Widgets, new accessibility features, File Explorer updates and performance improvements, and more. Windows Insider Program Here is what Microsoft released for Windows Insiders this week: Builds Canary Channel Build 29617.1000 and build 28120.2374 These builds bring new accessibility features, new Windows Update controls, audio improvements, and more. Dev Channel Build 26300.8758 This build includes redesigned taskbar settings, File Explorer improvements, and more. Beta Channel Build 26220.8754 and build 28020.2366 This small update fixes the OneDrive bug in File Explorer, tweaks system sounds in dark mode, and more. Updates are available This section covers software, firmware, and other notable updates (released and coming soon) delivering new features, security fixes, improvements, patches, and more from Microsoft and third parties. If you use AI-powered browsing history search in Microsoft Edge, the company has bad news. A new update on the Microsoft 365 Roadmap revealed that Microsoft is discontinuing the feature. Despite using on-device models for natural search, some users found it creepy, claiming that Microsoft lacks trust in features like this. While the ability to find pages without using 100% precise words may sound cool, customers argued that it was nothing but another feature to bloat the browser with more AI. Good riddance? PowerToys received several updates this week. For one, Microsoft released version 0.100.1 with several improvements and bug fixes for the recently arrived version 0.100. A couple of days later, Microsoft dropped another update, this time fixing memory leaks in Command Palette Dock. In addition, the company is working on a new module that will make it easier to switch between windows within one application using the Alt + ` shortcut. The new module should make it to the stable release somewhere soon. Here are other updates and releases you may find interesting: New Ventoy update adds Windows 11's mandatory update support and more Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats Microsoft is building an AI datacenter that "uses less water than a fast food restaurant" Microsoft adds new AI study and teaching tools for free to Microsoft 365 Education Researchers claim Microsoft's quantum breakthrough is flawed by basic Python errors Microsoft is bringing a much-needed Recap app to Teams Microsoft's fast coding model, MAI-Code-1-Flash, comes to Copilot Business and Enterprise Here are the latest drivers and firmware updates released this week: AMD Radeon Software 26.6.2 with FSR 4.1 support for RDNA 3 graphics card. However, the driver contained a bug, which prevented installations on Windows 10 PCs. AMD fixed that with a quick hotfix update. Reviews are in Here is the hardware and software we reviewed this week This week, Steven Parker published several reviews. He shared his experience with the Creative Sound Blaster AE-X PCIe, a high-quality sound card with a headphone amp, low-latency communications, great build quality, and DSD256. However, it is on the pricier side of the spectrum, and it lacks EMI shielding. Check out the full review here. The second review is about the TerraMaster F4-425 Pro, an octa-core Intel NAS with a stand-out feature: built-in AI (OpenClaw). We also published a few Hands On reviews, which you can view below: We check out the SKG PS700 Neck Massager SKG Hand Massager with Heat OS500 hands on Hands-on with BOOX Tappy: cute little reading accessory Hands on with the ProtoArc EM25 affordable ergonomic mouse On the gaming side Learn about upcoming game releases, Xbox rumors, new hardware, software updates, freebies, deals, discounts, and more. If you plan to purchase a new Xbox, it's time to act now. This week, Microsoft announced yet another Xbox price increase. Starting August 1, 2026, all Xbox Series X|S models with 512 GB of storage will cost $100 more. As for the 1TB models, they are going up in price by a whopping $150. Finally, Microsoft is discontinuing the 2TB Xbox Series X. To make up for that, Microsoft announced a few programs to make its consoles more accessible. Those include BNPL, interest-free financing, pre-owned consoles, certified refurbished consoles, and more. Valve also shared some not-so-welcome news. The company has finally announced prices of the upcoming Steam Machine console, and if you plan to buy one, get ready to spend a whopping $1,049 on the 512GB configuration. The Steam Machine is now available for preorder, with shipments scheduled for June 29, 2026. Grand Theft Auto VI also received its official price tag. Rockstar Games announced that the long-anticipated game will launch at $79.99 for the base edition and $99.99 for the ultimate edition. The latter includes an exclusive collection of premium vehicles, weapons, apparel, and action threaded across all aspects of Jason and Lucia’s story." Those who preorder the game will get extra bonuses, including a Vintage Vice City Pack of cosmetic items as well as a free month of GTA+. NVIDIA announced new games for its GeForce NOW streaming service. Those include Dark Scrolls, SAND: Raiders of Sophie, Deer & Boy, EMPULSE, and more. Steam is running its annual Summer Sale, during which you can purchase plenty of various games with big discounts. It runs until July 9, so in case you missed it, you can still get some games at a lower price. Also, you can get two games for free in the Epic Games Store, plus more deals are available in this week's Weekend PC Game Deals issue. This link will take you to other issues of the Microsoft Weekly series. You can also support Neowin by registering for a free member account or subscribing for extra member benefits, along with an ad-free tier option.
    • Text extractor hasn't been working great on 0.99.1 but I am now updating to this version, hopefully it's better!
    • Yet you did exactly what they wanted you to do - is it better now without "Europrats"? BTW, UK had joined EU (EEC back then) and was one of the leading member states, it never joined Schengen Zone though 😉
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      502
    2. 2
      +Edouard
      226
    3. 3
      PsYcHoKiLLa
      156
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!