Recommended Posts

8 hours ago, Arachno 1D said:

Thats an awful narrow road down to the homes are there passing places build in?

Oh and having not seen that type of build before do you remove the underlying wheels and axles once finished or leave them in place in case you want to move again?

No there's no passing zones or anything, the road was actually built by my grandfather years and years back, and the county eventually put gravel on it and called it a day.  If you meet somebody one of you just has to back up to a wide spot or a driveway.

 

I'm pretty sure they will remove the axles and the tongue, but if it needs to be moved again for whatever reason, people who move these things professionally keep axles and tongues of various sizes on hand.  Some people leave them, but since this is a double wide they'll probably take them since they're seen as being more "permanent".

 

I'm not up there because I have to be at work, but my wife is up there and there's one crew putting the two pieces together and leveling it and a separate crew who happened to show up at the same time to install the septic.  Here's the footage I recorded yesterday.  I handed my wife the camera today so I'm not sure what she is or isn't recording, but if she got any interesting footage I'll string that together, and I'm off work until after the first of the year so when anything else happens I'll be able to record it.

 

Anyway, here's yesterday's footage.  It's a little longer at 24 minutes.

 

 

  • Like 2
9 hours ago, Skiver said:

I understand if you don't want to answer this but, just for the house along, not land or cost of shipping etc... how much does something like that cost?

 

I have to admit your video made me chuckle a little, I don't think I could have described a more stereotypical American... dressed in camo, with a massive gun, driving a truck :D

Best part is, he's not a stereotypical American, he's a stereotypical American who lives in the hills of Kentucky (not a dig at all). There really is no such thing as a stereotypical American since the US covers such a wide area/range of people. There is a perceived view of Americans just as we perceive the UK/British, which isn't a good representation either :)

1 hour ago, Raze said:

Congratulations, Gerowen!  My wife is from Harlan, KY.  We often visit her family, it's a beautiful area with hollers and camps.  Do you do any ginseng harvesting (senging I think they call it)?

I do but it's hard to find.  I dig bloodroot and yellowroot still, but Ginseng is hard to find.  A Ginseng plant takes 4-5 years to mature enough to harvest, and a lot of people who don't care would dig yearling plants and not even bother planting the berries or leaving a piece of the root behind, which means no plant to take its place in the following years.

  • Like 2
11 hours ago, Skiver said:

I understand if you don't want to answer this but, just for the house along, not land or cost of shipping etc... how much does something like that cost?

 

I have to admit your video made me chuckle a little, I don't think I could have described a more stereotypical American... dressed in camo, with a massive gun, driving a truck :D

I'm not sure to be honest because when you buy one new the cost of shipping it and stuff is included; but since the sticker price was $49k with shipping/insurance, a warranty for any damage done, etc., I would guess the whole-sale price of the house we bought would be $35k-$40k. (USD)  We're doing most of our utility hookups out of pocket because of where we're at, but the $50k we paid still included moving it in and setting it up, and since that has included separate crews of people from different companies doing different tasks (one crew poured footers, one crew moved it in, one crew put it together and sealed it) and is also going to include the supplies and money to cover a year's worth of repairs (we get a year warranty on damage done during setup), I'm gonna guess they spent $5k easily just on setup fees, and probably quite a bit more because when we first started this project and before we decided to buy a new house, I was quoted $3,500 just to move the 14x70 we're in now up there, and we're only like 3 miles away.

So I've got a little bit of footage from today.  Not as much as I would have because I had to work and my wife had the camera most of the time and she spent some time wrapping presents, but there is some footage I might be able to put together.

 

To make up for the lack of details on how the house is assembled though, there's some bonus footage I'm going to tack onto the end.  It involves a brown four legged animal, roughly 200 pounds in weight and the front end of my truck, :p

7 hours ago, xendrome said:

Best part is, he's not a stereotypical American, he's a stereotypical American who lives in the hills of Kentucky (not a dig at all). There really is no such thing as a stereotypical American since the US covers such a wide area/range of people. There is a perceived view of Americans just as we perceive the UK/British, which isn't a good representation either :)

Yeah the culture in this country is SO varied from place to place, and on some issues (gay rights/marriage, freedom of/from religion) I'm actually pretty liberal for this area.  I've driven most of the length of this country (not counting Alaska or Hawaii) and it's a hard 4-5 day drive.  Around here everybody owns a gun, a lot of people hunt and even more people own a pickup truck because even those people who don't do manual labor for a living do it around home for their own pet projects or side jobs, and it's a heck of a lot easier to do things if you've got your own pickup truck to haul stuff when you need to.  I couldn't own an electric car here even if I wanted to because there's no charging stations, and it's a half an hour to our nearest Wal-Mart, let alone shopping mall.  However, go to L.A., NYC, Chicago, etc. and the cultures/mindsets are completely different than they are here.  If I went cruising around L.A. with an AR-15 in the back glass of my truck or a pistol on my hip, I'd probably wind up shot by the cops on the six-o'-clock news.  Likewise, if somebody from L.A. came cruising around here, they would probably feel pretty uncomfortable with the country accents, chewing tobacco, guns, deer and pickup trucks everywhere.

 

That variation in culture is part of what makes America great, even though we joke about how all city people are pansies and city folks joke about how all country folks meet their sisterwife at the family reunion, :P.  That variation in culture is also one reason that I think there's lots of issues where we should give the states more control over things than they currently have.  Attitudes and cultures vary wildly from place to place.  What's normal in one place might seem like insanity in another place, and blanket legislation from Washington D.C. that tries to solve problems which only really affect specific areas are not the best answer in most situations I think.

 

Anyway, sorry for going off topic.  My wife got some footage today and I walked around for a few minutes and got some footage after I got off work.  I'm trying to weed out all of the unnecessary fluff right now to get the video time under 20 minutes.

 

2016-12-20 (1).png

  • Like 3
12 hours ago, xendrome said:

Best part is, he's not a stereotypical American, he's a stereotypical American who lives in the hills of Kentucky (not a dig at all). There really is no such thing as a stereotypical American since the US covers such a wide area/range of people. There is a perceived view of Americans just as we perceive the UK/British, which isn't a good representation either :)

 

I did think that when I wrote it, perhaps one of the many stereotypes would have been a better way of saying it.

10 hours ago, Gerowen said:

I'm not sure to be honest because when you buy one new the cost of shipping it and stuff is included; but since the sticker price was $49k with shipping/insurance, a warranty for any damage done, etc., I would guess the whole-sale price of the house we bought would be $35k-$40k. (USD)  We're doing most of our utility hookups out of pocket because of where we're at, but the $50k we paid still included moving it in and setting it up, and since that has included separate crews of people from different companies doing different tasks (one crew poured footers, one crew moved it in, one crew put it together and sealed it) and is also going to include the supplies and money to cover a year's worth of repairs (we get a year warranty on damage done during setup), I'm gonna guess they spent $5k easily just on setup fees, and probably quite a bit more because when we first started this project and before we decided to buy a new house, I was quoted $3,500 just to move the 14x70 we're in now up there, and we're only like 3 miles away.

 

That's cool, something you wrote in an earlier post made me think you'd paid for the shipping etc separately so that still answered it perfectly, thanks :)

Got yesterday's footage stitched together including a quick, in the dark walkthrough of the house.  The "bonus footage" starts at 21:50.

 

 

  • Like 4

I've got some more footage, but I don't know if I'll bother making another video just yet.  I may wait until tomorrow and add whatever I get then to it to make it longer because I wasn't able to get a ton of footage today.  My wife was at work until 4 in the evening and she had the carseat, so I wasn't able to leave the house for quite a while.  She's off work tomorrow though, so I'll be able to leave much earlier and hopefully get more done.  I'm still editing today's footage, so it just depends on how much I end up with.

 

2016-12-22.png

Got the electric pole set last night, there's a guy up there digging the ditch for the water line right now so I'm going to go work on running that water line and maybe get somebody up there to run wire from the pole into the house, :-)

 

 

Certainly coming on, did they winch the two house parts together once they were levelled off by the contractor?

Im suprised you didnt get the digger to make your trench and hole for the Pole it would have saved you all a bit of sweat :D

 

EDIT Just a thought on that can you just install a plastic pipe for the cable to the Pole footing so you can concrete it to ground level?

  • Like 2
6 hours ago, Arachno 1D said:

Certainly coming on, did they winch the two house parts together once they were levelled off by the contractor?

Im suprised you didnt get the digger to make your trench and hole for the Pole it would have saved you all a bit of sweat :D

 

EDIT Just a thought on that can you just install a plastic pipe for the cable to the Pole footing so you can concrete it to ground level?

I picked up the conduit for the wiring today, that's why I didn't put any more cement than that in the hole, I'm going to install the conduit for the wiring so that I can go ahead and finish the cement without obstructing where the wire needs to go.  I'm going to do cement the entirety of the 3 feet so that hopefully the pole won't rot too fast.

 

I didn't really get an up close of how joining the pieces worked because the day they joined the two halves I wasn't there until later that evening, but from what I understand there's basically plates in the floor and ceiling that have huge bolts ran through them and they use an air drill to crank down on those bolts and draw the two halves together, and then they re-level the whole thing as a unit.  They had to level them somewhat beforehand though to make sure the bolts/holes would line up enough to join the halves.

 

I'm doing a lot of the utility work myself so that it's done "my way", and also to save a dollar.  Everything I can do myself is one thing I don't have to pay somebody else to do, and if something goes wrong then I have personal knowledge of where everything is located at and how it's put together.  Plus it's good exercise, :-)

 

Got the water lines spliced and stretched out today, but not connected on the ends.  Picked up some more hardware and one guy finished digging the ditch for the water line as a favor so I don't have to spend any extra money on that work.  I've got lots of footage to go through, and tomorrow is Christmas Eve so it may be a few days before we get anything else done and this footage gets uploaded, but progress is being made one step at a time, :-)

Just a suggestion but mark up where you have the water line joints just in case you have a leak [i.e. pooling water] when you turn the pump as they may be the likely cause if faulty.

I know you said earlier about being protected from severe weather but do you get much ground frost in that area that would get to the water line?

  • Like 3
49 minutes ago, Arachno 1D said:

Just a suggestion but mark up where you have the water line joints just in case you have a leak [i.e. pooling water] when you turn the pump as they may be the likely cause if faulty.

I know you said earlier about being protected from severe weather but do you get much ground frost in that area that would get to the water line?

The freeze line usually stops about 8 inches or so down, the shallowest portion of the trench is 16 inches deep.  I'm also planning on, wherever there's a splice or connection, placing a bucket over/around the connection.  Basically I'm going to cut the bottom off a bucket, cut notches in the sides of the bucket for the line to travel through, flip it over on top of the line so that the splice or connection is in the bucket.  I'll then stuff the bucket full of insulation, place the bottom back over it to keep dirt out, and bury it, bucket and all, then plant a flower or place some other marker over top of it.  That way, if I lose pressure one day, I only have to remove 5 or 6 inches of dirt, remove the bottom (or in that case it'll be seen as the top) of the bucket, pull out the insulation and inspect the connection.  There's also already a shutoff valve in the well itself so that if there is a problem, I can shut water off at the well without having to spend time releasing the pressure before I can work on my lines.

 

A couple of years ago it got down to -25 degrees here (fahrenheit), which is the coldest I've ever seen it, and my parents' water line, which I also buried at 16 inches, never froze so we should be fine at 16 inches.  Their water did freeze though, up inside the house because they didn't leave the water trickling and it froze right where it came out the bottom of their water heater because the power also went out, so even if they had left the water running, the pump had no power and the pressure would have ran out in a couple of hours.

 

I'm also not going to bury the splices and connections until after everything is hooked up.  I'm going to cut power to the pump, release all the pressure in the tank, make the connections, and then power it on.  That way I can check all of my connections as well as all of the connections in the house to make sure that nothing popped loose in the process of shipping it.

  • 2 weeks later...
43 minutes ago, jnelsoninjax said:

@Gerowen any updates? I've been enjoying watching your progress!

Mostly just battling the cold and waiting on inspectors and such.  I got the wire connected to the house today from the service box on the pole we set in the ground.  I didn't get any footage of that because I, like an idiot, forgot my camera, and I had to get home because my wife works this evening.  However, it's still uncovered because the inspector has to come by tomorrow and bless off on it, so I'll take the camera and give an overview of it tomorrow.

 

I also got some footage of a buddy of mine who brought up his 4 wheeler with a snow plow blade and covered 90% of our water line so when I connect it, I won't have nearly as much work to do covering it up.

 

I haven't published any new videos because there hasn't been anything particularly video worthy, and the clips I do have are just that, short, intermittent clips, so I'm holding onto them until I've got enough to string together into something longer.

 

It's supposed to warm up tomorrow, so I may try and get our septic line connected to the tank.  We already have the sticker so it's not stopping us from getting the power turned on once the electrical inspector looks at the wiring, but I need to get it done as soon as possible.  Problem is the ground is frozen solid right now.  When digging the last little bit of dirt today for the electric wire I basically had to take a wedge and hammer it into the ground and cut out little squares of frozen dirt where I had left a small amount of dirt on the side of the pole where the wire was going to come out.

 

After the inspector blesses off on the wiring, I can call the power company and they'll be up to spend a day running a couple hundred feet of wire and setting a new pole in the yard, so I'll try to get some footage of that as well. :-)

This topic is now closed to further replies.
  • Posts

    • Go for a Echo Dot or Pop instead. These Echo shows just advertise to you.
    • NetSpeedTray 1.3.3 by Razvan Serea NetSpeedTray is a lightweight, open-source Windows network monitor that shows live upload and download speeds directly on the Taskbar. Designed for efficiency, it quietly sits in the system tray, conserving CPU and battery with dynamic updates. It blends seamlessly with Windows 10/11, adapts to light/dark themes, and auto-positions to avoid overlaps. Features include accurate interface detection, customizable display, optional mini-graph, color coding, granular font and unit control, detailed per-interface history graphs, safe data management, and easy CSV export—bringing the network monitoring Windows forgot. NetSpeedTray key features: Lightweight & Efficient Runs quietly in your system tray without consuming resources. Features a "Dynamic Update Rate" that lowers refresh frequency when the network is idle to save CPU and battery life. Native Look & Feel Blends seamlessly with Windows 10/11 UI. Smart detection for light and dark taskbar themes ensures text is always visible. Intelligent & Adaptive Positioning Automatically finds empty space next to your system tray and shifts to make room for new icons, preventing overlaps. Seamless OS Integration Behaves like a native Windows component. Hides instantly with auto-hiding taskbar Hides when a fullscreen app is active Smart Network Monitoring Accurate by Default: Auto mode identifies your main internet connection and ignores noise from VPNs or virtual adapters. Easy Interface Selection: Switch effortlessly between Auto, All, or Selected network interfaces via intuitive radio buttons. Total Visual Customization Free Move Mode: Unlock and place the widget anywhere on your screen. Optional Mini-Graph: Real-time graph of recent network activity with adjustable opacity. Color Coding: Customize colors and speed thresholds to quickly see network status. Granular Display Control Text & Font: Adjust font family, size, weight, and alignment. Units: Automatic (B/s, KB/s, MB/s) or fixed Mbps display. Precision: Set decimal places and always show them for uniform appearance. Detailed & Intelligent History Graph Smart Scale: Logarithmic scale shows low-level traffic and large spikes clearly. Per-Interface Filtering: View speed history for specific adapters (Wi-Fi, Ethernet, VPN). Safe & Efficient Data Management: Adjustable retention, automatic cleanup, optimized database. Easy Data Export: Export raw data to .csv or save high-quality graphs for reports. NetSpeedTray v1.3.3: The Updater Fix A stabilization release that repairs a critical regression in v1.3.2: the app shipped without OpenSSL, which silently broke every HTTPS request — including the built-in update checker (the "Could not check for updates" error many of you hit). This release restores it, hardens the build so it can't happen again, and fixes a startup crash plus four other reported bugs. Changes: Fixed update checking — Resolved a critical issue that prevented the app from checking for updates ("Could not check for updates"). Fixed startup crash with Auto-Cycling — The app no longer crashes on launch after enabling Cycle display mode. Fixed incorrect network speeds on 10GbE adapters — Multi-gigabit network cards now display speeds correctly instead of being stuck at 0. Improved color coding — Default color is shown when idle, and color/threshold changes now apply immediately without restarting. Fullscreen visibility fix — The widget now correctly stays visible over fullscreen apps when Keep Visible is enabled. Improved AMD Ryzen temperature detection — More reliable CPU temperature monitoring for Ryzen processors. Cleaner upgrades — Installer now removes outdated application files during upgrades, preventing DLL/version conflicts while preserving user settings. Improved stability — Fixed potential DLL loading issues by excluding critical OpenSSL and NumPy components from UPX compression. Better settings window — Scrollbars removed and layout improved for a cleaner experience. Localization improvements — Updated translations and completed missing UI text across all supported languages. More reliable releases — Added regression tests covering recent critical fixes, bringing the test suite to 196 passing tests. [full release notes] Download: NetSpeedTray 1.3.3 | 87.9 MB (Open Source) Download: NetSpeedTray Portable | 101.0 MB View: NetSpeedTray Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Why Delta Chat is the best decentralized messenger you have probably never tried by Paul Hill There is no shortage of messaging apps out there; we have WhatsApp, Messenger, and Telegram, just to name a few. While Meta has taken steps to incorporate encryption into Messenger and WhatsApp, they still leave a lot to be desired. If you are in the market for a messaging app that promotes security, privacy, and optional anonymity, you'll want to read what I have to say about Delta Chat. For those not familiar with Delta Chat, rather than relying on centralized servers as you do with Facebook Messenger, it relies on email. Essentially, it is a chat interface that feels like a messaging app, but secretly in the background, it is firing off emails. In the past, you used to have to sign in with your email account. When you sent messages to people, it would just be sending encrypted messages to their inbox, which their Delta Chat client would decrypt. When I first learned about Delta Chat, it required users to sign in with an email account, but I was pleasantly surprised upon trying it in 2026 that this is no longer a requirement, or the preferred method was to use the app. Recently, I’ve tried UAD-ng on my old Nokia 3.4 to disable most of the Google apps because the bootloader is locked, and this is the next best option. While finding replacement apps in F-Droid, I came across Delta Chat again, and it has undergone quite a big change since I last used it, with its new chatmail relays, which no longer require you to sign in to your own email account, providing anonymity, and they offer greater security. Android and Desktop Delta Chat apps. Not only does it run on my de-googled phone, but it also works on desktop computers and iOS, making it truly ubiquitous. For me, Delta Chat is a wonderful alternative messenger because it gives you more control. It supports switching between different profiles, which you can set up super quickly; you don’t register a username, you don’t register a password. The only thing you do have is a random string email address on a chatmail relay (which you don’t have to memorize). To maintain access to your profile, you just need to add a second device to your account via QR code or make a backup of your account, which you can restore later. Fail to do these, your account is gone - as it should be if you don’t want to leave accounts that could get hacked later on. My decision to block Google stuff on my Nokia was done for practical reasons; the device sucked when it launched, and it sucks even more now. The nice thing about F-Droid and the apps within is that they’re usually lightweight, free of bloat, and work well on that device. What was inconvenient for me was that it was hard to send messages from that device, say if I wanted to copy a code over to my main phone or send family members a link from that device. That’s when I decided to look at the available chat apps and saw Delta Chat. Another nice thing about Delta Chat is its notifications. Some messaging apps rely on Google’s ecosystem for notification transport on Android; however, with Delta Chat, it can use Google’s solutions if you have Play Services or MicroG installed. Otherwise, it is able to keep a background connection to the chatmail relay server so that you can get notified when you receive a message. As free software, the code of Delta Chat is open for all who want to take it and build upon it. In the future, if the developers of Delta Chat make a catastrophically bad decision and take the app in an undesirable direction, users can take the code and fork the project. This contrasts with closed-source apps from corporations that can take their products in any direction they like. By relying on free software instead of closed-source programs, you actually control your computing. I’ve spoken at length about how running this type of software is like owning your own home rather than renting it. The same applies here; if you use Delta Chat, you don’t need to worry about it going away in the future. Whether it is Telegram, WhatsApp, or Messenger, you are required to register a username and password to use these services. A major flaw in this design is that anyone can try various passwords and potentially break into your account with your complete chat history intact. Sure, there is encryption in Messenger, where you need a second PIN and two-factor authentication in Telegram, but breaches happen all the time. Unlike before, when you used to sign in to your email account to send and receive messages, the primary way to do it now is to create an account on a chatmail relay. The resulting email address is a random string followed by the name of the relay you pick. This means you can start and begin adding contacts Without a username and password, you either need to ensure you have a backup or at least one device running your Delta Chat profile. The primary way to log in on another device is to go to the settings and add a second device. Then, you’ll just scan a QR code with your new device, and it’ll log in to your account and sync all your chat history and contacts. To end users, Delta Chat just looks like any instant messenger; however, it is really sending your messages as encrypted emails to your contact. This is pretty cool from a censorship perspective, as it makes the service more difficult to block. Previously, the main way to use the app was by logging in with email, but nowadays, it’s recommended that you use chatmail relays. Chatmail relays temporarily hold messages in case your device is offline. They are cheap, simple servers that don’t store data as group states. Other information, like your name and avatar, only exists on your device and the devices of those you share your contact information with. The relays are also decentralized and operated by various groups and individuals. It is even possible to set up your own chatmail relay, but most people will want to use one hosted elsewhere. To keep your messages secure, Delta Chat uses a secure subset of the OpenPGP standard that gives you automatic end-to-end encryption. It also uses Secure-Join to exchange encryption setup information through QR-code scanning or invite links. Autocrypt is also used to automatically establish end-to-end encryption between contacts and all members of group chat, but sometime this year Autocrypt v2 will be rolled out, bringing post-quantum resistant encryption and forward secrecy. The Delta Chat FAQ is an interesting read that explains many more details about the app. Credit: Pexels Delta Chat is unique among messaging apps because it is built on email, a technology that’s decades old and isn’t going anywhere soon. What’s more is that email is not centralized either, so it’s far more difficult for any authoritarian regime to disrupt the Delta Chat app. I haven’t spoken too much about features yet, so I will do that now. Delta Chat allows you to do one-on-one chats, group chats, and create channels. It also supports file sharing and making audio and video calls when chatting one-to-one, but it’s not available for group chats right now. At the time of writing, the calling functionality is disabled and can be enabled in Settings > Advanced > Debug Calls. I have used the video calling feature, and the quality is excellent. It works over WebRTC, another open standard. The app also lets you send voice notes, enables disappearing messages, and has its own app ecosystem. I did try playing chess one time there, but it was a bit spotty; though, we did manage to complete the game with a victory for me. To add people to Delta Chat, you can either give them your Delta Chat link or your QR code to scan. These are the only ways to add users, so you won't have any spam bots bothering you. If the people you want to chat with don't have the app yet, just send them your link, and it will take them to a webpage where they can install the app and then add you. It's really quick for them to install it and get started, which is nice. Credit: Microsoft. The Majorana 2 quantum chip unveiled in 2026. I do not think quantum computers are too far out now, and I do hope that Delta Chat is able to push out Autocrypt v2 sooner, rather than later, so bad actors do not attempt to collect encrypted communications and then decrypt them in the future using quantum computers. By getting people’s messages post-quantum-safe now, users won’t have to worry when quantum computers start cracking legacy encryption. Overall, I would recommend this app to people who are already past WhatsApp and Messenger and have perhaps begun using apps like Telegram or Session. It shares a lot of characteristics with these apps and goes a lot further than Telegram in terms of security. By being based on email, it is also resistant to censorship, and the lack of a username and password makes you anonymous (if you want to be) and safe from brute force password cracking attempts. Let me know in the comments if you’ve tried Delta Chat recently. Do you think it's a good bulwark against governments that are tightening their grip on the internet?
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      474
    2. 2
      +Edouard
      220
    3. 3
      PsYcHoKiLLa
      156
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      71
  • Tell a friend

    Love Neowin? Tell a friend!