DVD Drive Is Stuck And Won't Close


Recommended Posts

I do not know how this happened but my best guess is that I some how opened the drive and forgot it was still opened. I moved my right leg slightly and bumped into one side of the opened drive and now it looks lopsided, like one side of it is not aligned properly (see pictures below and video). I tried pushing it back in with some force, but I didn't want to break it so I stopped. I also took it out of my computer to examine it and it is obvious the one side is not properly lined up. I don't know how to fix this, and would really love to know how I can if possible fix this. The drive is out of my system for the moment until I can find a potential fix for this issue. Any help would be appreciated.

 

IMAGES

4k9E5gg.jpg

lnl2yF3.jpg

 

 

VIDEO

 

Link to comment
https://www.neowin.net/forum/topic/1327294-dvd-drive-is-stuck-and-wont-close/
Share on other sites

There's a gear inside that pulls the tray in and out. It looks and sounds like the tray has been knocked out of place from the gear. You should be able to fix it by opening the drive up and setting the tray back in place. There should be four screws on the bottom then the top cover will come off. The gear is usually near the front, and it should drive some teeth along the edge of the tray on the bottom. Hopefully the gear is just out of place and nothing is broken. Also make sure the rubber belt that goes from the motor to the gear is on properly.

cd-player-tray-drive-belt-and-gear-wheels.jpg

Edited by Rigby
  • Like 2

From your video, to me it looks as though the mechanism that pulls the tray in has failed.

 

Just to confirm that it is mechanical, if you start to physically push the tray in, it should recognise that and the motors should pull the tray in itself. If when you push it in, it doesn't do that and stops moving when you stop pushing it, then I think it's definitely a mechanical issue.

 

The last time I saw this, one of the bands had become dislodged. Simply re-attaching it worked. Depending on your experience, you could attempt to open the drive up and taking a look. You should see a dislodged band down the side. Reattach this and it should be good.

  • Like 1

Remove the drive and take it apart, it's actually really easy to take the top cover off and see what's going on inside. If the drive fell off the rail it's a pretty easy fix to put it back on.

  • Like 1
19 minutes ago, xendrome said:

$19.97 - http://a.co/hBo9ng8

 

Next question... not worth trying to fix it and scratching up your discs if there is a worse problem with i t.

That's the wrong drive; the Blu-ray model is $60. It's an easy fix anyway so I wouldn't waste money replacing it.

Rigby, I looked at the picture you posted. I was only able to remove the plate from the bottom of the drive, not the top. Anyway I looked inside, and then at the picture for reference and all I see is one white round gear, and another shaped gear that both have teeth on it. How am I suppose to fix the gears so the drive gets back on track. Is the drive suppose to have power to it so the gears can initiate?. I don't know how else to re-align it. I tried moving the gear with a screw driver but that really didn't do anything. And also this is the drive I have - https://www.amazon.com/gp/product/B00E7B08MS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

 

INSIDE DRIVE

Ih5GOBY.jpg

 

INSIDE DRIVE VIDEO

 

Basically all you need to do is

1: Stand the drive on it's end with the open tray pointing up then

2: Take a really big hammer ( I find 12lb sledge hammers work the best )  and hit it repeatedly until the drive try is closed this may take more than one blow to complete 

  • Like 1
3 hours ago, Athlonite said:

Basically all you need to do is

1: Stand the drive on it's end with the open tray pointing up then

2: Take a really big hammer ( I find 12lb sledge hammers work the best )  and hit it repeatedly until the drive try is closed this may take more than one blow to complete 

I hope you are joking...

9 hours ago, xendrome said:

$19.97 - http://a.co/hBo9ng8

 

Next question... not worth trying to fix it and scratching up your discs if there is a worse problem with i t.

This is the only post that makes sense - its $20... move along.

  • Like 2

Have you tried using more force? Application via the fleshy part of your hand (thumb) I understand there is a very real and very big risk of damaging, even breaking the tray, but without fully disassembling the drive, I don't see another option. Might force the runner back into place.

(If it were my drive, I'd give it a shot, worst case scenario, I have to buy a replacement.)

But if it is not an option, then please disregard this post.

8 hours ago, Sharpstick68 said:

Rigby, I looked at the picture you posted. I was only able to remove the plate from the bottom of the drive, not the top. Anyway I looked inside, and then at the picture for reference and all I see is one white round gear, and another shaped gear that both have teeth on it. How am I suppose to fix the gears so the drive gets back on track. Is the drive suppose to have power to it so the gears can initiate?. I don't know how else to re-align it. I tried moving the gear with a screw driver but that really didn't do anything. And also this is the drive I have - https://www.amazon.com/gp/product/B00E7B08MS/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

The top cover should come off also, allowing you to remove the tray and align it in the proper position with the gear. You may need to remove the front bezel first, should be some clips on the side holding it in place. The other gear in your picture I think is the one that lifts the disc spindle up and down, shouldn't be related to the tray problem. Really just need to get that top cover off for the next step; keep looking it over and working with it and you should be able to figure out how to remove it. I would not recommend trying to force the tray back in position since breaking any of the gears or teeth would ruin it. Do you know anyone who works on stuff you could take it to?

Edited by Rigby
On 4/6/2017 at 2:09 PM, Mindovermaster said:

I hope you are joking...

Nope I was completely serious .... once one thing starts going wrong it'll be a never ending slide into fully not working better to be rid of it now 

7 hours ago, Athlonite said:

Nope I was completely serious .... once one thing starts going wrong it'll be a never ending slide into fully not working better to be rid of it now 

The rest of the people are trying to help him, just not call it quits and get a new one.

On 4/8/2017 at 0:26 AM, Mindovermaster said:

The rest of the people are trying to help him, just not call it quits and get a new one.

He can fix it all he wants but it wont be long before it will need fixing again it'll be a rinse and repeat opperation untill finally it's totally buggered I don't see the need to fix such a cheap piece of hardware nowadays just junk it and get a new one simple as that 

4 minutes ago, Athlonite said:

He can fix it all he wants but it wont be long before it will need fixing again it'll be a rinse and repeat opperation untill finally it's totally buggered I don't see the need to fix such a cheap piece of hardware nowadays just junk it and get a new one simple as that 

He knocked the tray out of its track with his knee; that's all. The drive isn't failing, and there's no reason to assume anything else will go wrong when the tray is back in position. I suppose $60 may seem cheap to you but throwing away the drive for no reason is absurd.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Stellarium 26.2 by Razvan Serea Stellarium is a free open source planetarium for your computer. It shows a realistic sky in 3D, just like what you see with the naked eye, binoculars or a telescope. It is being used in planetarium projectors. Just set your coordinates and go. Stellarium key features: Realistic simulation of the sky, sunrise and sunset Default catalogue of over 600,000 stars Downloadable additional catalogues for up to 210 million stars Catalog data for all New General Catalogue (NGC) objects Images of almost all Messier objects and the Milky Way Artistic illustrations for all 88 modern constellations More than a dozen different cultures with their constellations Solar and lunar eclipse simulation Photorealistic landscapes (more are available on the website) Scripting support with ECMAScript (a few demo scripts are included) Extendable with plug-ins: 8 plug-ins installed by default, including: artificial satellites plug-in (updated from an on-line TLE database) ocular simulation plug-in (shows how objects look like in a given ocular) Solar System editor plug-in (imports comet and asteroid data from the MPC) telescope control plug-in (Meade LX200 and Celestron NexStar compatible) The major changes of this version: Added new sky culture Added new plugin: Planes Many improvements in plugins Many improvements in Core and GUI Many updates in sky cultures. [full release notes] Download: Stellarium 26.2 (64-bit) | 456.0 MB (Open Source) View: Stellarium Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • NASA: This asteroid may not kill us but it probably won't be far off either by Sayan Sen Image by Zelch Csaba via Pexels New observations by NASA's James Webb Space Telescope have eliminated the last remaining impact threat posed by asteroid 2024 YR4, ruling out the possibility that the near-Earth object could strike the Moon in December 2032. NASA said observations collected by Webb on February 18 and 26, 2026, enabled scientists to refine the asteroid's orbit enough to "rule out a chance of lunar impact on Dec. 22, 2032." Instead, asteroid 2024 YR4 is now expected to pass the Moon at a distance of about 13,200 miles (21,200 km). The agency stressed that the update "reflects improved precision in our understanding of where the asteroid is expected to be in 2032 rather than a shift in its orbital path." The announcement closes a remarkable chapter in planetary defence that began in late 2024, when the approximately 60-metre-wide asteroid briefly became the most closely watched near-Earth object in the world. Discovered on December 27, 2024, by the ATLAS telescope in Chile, 2024 YR4 initially appeared to have a small chance of colliding with Earth on December 22, 2032. As astronomers gathered more observations, the impact probability briefly climbed to around 3%—the highest ever recorded for an asteroid of its size—before steadily falling as its orbit became better understood. By early 2025, international observations had ruled out any significant risk to Earth. However, astronomers were left with another possibility: a roughly 4% chance that the asteroid could instead strike the Moon. "The probability that asteroid 2024 YR4 will strike the Moon on 22 December 2032 is now approximately 4%," the European Space Agency (ESA) had said last year, noting that "there is a 96% chance that the asteroid will not impact the Moon." ESA said such an impact, while unlikely, would have presented an extraordinary scientific opportunity. "It is a very rare event for an asteroid this large to impact the Moon – and it is rarer still that we know about it in advance. The impact would likely be visible from Earth, and so scientists will be very excited by the prospect of observing and analysing it," said Richard Moissl, Head of ESA's Planetary Defence Office. "It would certainly leave a new crater on the surface. However, we wouldn't be able to accurately predict in advance how much material would be thrown into space, or whether any would reach Earth," he added. The asteroid also exposed an important blind spot in planetary defence. Because 2024 YR4 approached Earth from the direction of the Sun, it remained hidden from ground-based telescopes until after its closest approach. "We looked into how Neomir would have performed in this situation, and the simulations surprised even us," Moissl said. "Neomir would have detected asteroid 2024 YR4 about a month earlier than ground-based telescopes did. This would have given astronomers more time to study the asteroid's trajectory and allowed them to much sooner rule out any chance of Earth impact in 2032." He added, "As an infrared telescope, like Webb, Neomir would have also immediately given us a much better estimate for the asteroid's size, which is very important for assessing the significance of the hazard." The latest NASA observations underscore the value of space-based infrared telescopes in tracking faint asteroids. According to NASA, Webb made "among the faintest ever observations of an asteroid," extending the object's observational record by nearly eight months at a time when it had become too faint for other telescopes. That additional data allowed scientists to eliminate the remaining uncertainty surrounding its 2032 flyby. Although asteroid 2024 YR4 is now confirmed to pose no threat to either Earth or the Moon, scientists say its discovery remains one of the most significant real-world tests of the international planetary defence system, demonstrating how continued observations can rapidly transform an object once considered hazardous into one whose future path is known with high confidence. Source: NASA, ESA This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Yup. Google is just scraping the entire internet for their own ad profits without sharing revenue with the sources. It's obviously stealing, but since these sites depend upon Google's search scraps to survive... As for me, I just stopped using Google for anything except Reddit searches. If Reddit's own search wasn't complete crapola, I'd never use Google search again.
  • Recent Achievements

    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
    • Apprentice
      daryld went up a rank
      Apprentice
    • Contributor
      Carltonbar went up a rank
      Contributor
    • One Month Later
      The_Focal_Point earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      418
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      130
    4. 4
      Xenon
      69
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!