Recommended Posts

3 hours ago, DocM said:

A very experienced astronomer satellite watcher who is disinterested in PR. 

Ok then...still a watcher.

 

I'm still trying to figure out where you got this from (source) "And the prop used to make the plane change to get them there will cut about 5 years off their life. "  Even the watcher didn't say that (he said years) ... which, once again, is not fact.

  • 2 weeks later...

And here, along with hosted DoD sensors on each satellite, is the anchor tenant for SpaceX's StarLink and other LEO satellite constellations using a compact phased array antenna. 

 

Should grease the wheels at the FCC.

 

If AFRL is "about to find out" if it would work, a reasonable assumption may be that soon a US fighter will grow a StarLink phased array antenna and attempt hooking up to SpaceX's two test satellites.

 

StarLink has end to end encryption.

 

For SpaceX, if it works, yet another funding engine for BFR/BFS development.

 

Aviation Week....

 

Quote

Could F-16s In Battle Talk Via Commercial Space Internet?

 

What if warfighters could install an antenna on their F-16s, much like homeowners do on their roofs, and establish a commercial internet connection, allowing them to send critical battlefield information rapidly to the rest of the force?  The U.S. Air Force Research Laboratory (AFRL) is about to find out. The Air Force is finally catching on to a revolution in the commercial small satellite world. Feb. 22 SpaceX launched a Falcon 9 rocket carrying two experimental satellites from ...{paywalled}

 

Five launches were up for bid under the Phase 1A EELV program.

 

SpaceX gets all three GPS-3 launches in 2019-2020. This is five straight GPS-3 launch wins for SpaceX.

 

ULA gets the AFSPC-8 and AFSPC-12 Air Force Space Command launches, both in 2020.

  • Like 1
  • 2 weeks later...

Looks like nations will rewrite the Outer Space Treaty themselves if the UN won't do it.

 

The US passed space mining legislation in the Spurring Private Aerospace Competitiveness and Entrepreneurship (SPACE) Act of 2015.

 

 

  • Like 1

Expect more of this. 70% confidence in this new date means they'll slip further to 2021 or further.

 

And the budget cap will likely be extended to $8.5b USD at least. They're too far in to cancel this one now (like SLS/Orion). Technology 10+ years out of date and all. :angry:

  • 2 weeks later...

Europa Clipper update

 

Quote

 

PALO ALTO, Calif., April 3, 2018 (Maxar PR) – SSL, a Maxar Technologies company (formerly MacDonald, Dettwiler and Associates Ltd.) (NYSE: MAXR; TSX: MAXR), and a leading provider of innovative satellites and spacecraft systems, announced today it was selected by NASA’s Jet Propulsion Laboratory to design and build critical equipment for a spacecraft that will explore Europa, one of Jupiter’s moons. The award reflects SSL’s leadership role in the space industry as a valued contractor supporting NASA mission needs and long-term commitment to accelerating innovation for the new space economy.

 

The Europa Clipper spacecraft, set to launch in the 2020’s, will perform repeated investigative flybys of Europa, an icy moon of Jupiter, which strong evidence suggests has an ocean of liquid water beneath its crust, potentially harboring conditions suitable for life. SSL will provide the Remote Engineering Unit, a critical interface between the spacecraft’s various attitude control systems, thermal sensors and the flight computer. Due to the highly radiative environment the spacecraft will be subjected to, the SSL design for the interface will include  innovative radiation-tolerant components expected to help power future exploration missions.

 

“SSL has a rich legacy of supporting NASA mission success with our commercial capabilities and innovative technologies,” said Richard White, president of SSL Government Systems. “Our work on the Europa Clipper mission continues our legacy with NASA and JPL, and furthers our overarching goal to develop disruptive technologies that advance humankind’s mission in space.”

 

Other examples of SSL’s long-term, trusted collaboration with NASA on deep-space exploration include a NASA Discovery Program to explore the metal asteroid Psyche, for which SSL is leveraging the company’s expertise in solar electric propulsion and automation technologies. SSL is also collaborating on NASA’s Lunar Orbital Platform-Gateway by creating a module to provide power and control for this human crew-tended spaceport in lunar orbit that would function as an access point to the Moon and deep space.

 

About SSL

 

SSL, based in Palo Alto, California, is a leading provider of advanced spacecraft systems, with broad expertise to support commercial and government satellite operators and innovative space missions. The company designs and manufactures spacecraft for services such as direct-to-home television, video content distribution, broadband internet, mobile communications, in-orbit servicing, space exploration, and Earth observation. As a Silicon Valley innovator for 60 years, SSL’s advanced product line includes state-of-the-art small satellites, and sophisticated robotics and autonomous solutions for remote operations. SSL is a Maxar Technologies company (NYSE: MAXR; TSX: MAXR). For more information, visit www.sslmda.com.
 
About Maxar Technologies

 

Maxar Technologies (formerly MacDonald, Dettwiler and Associates Ltd.) is a leading global provider of advanced space technology solutions for commercial and government markets including satellites, Earth imagery, geospatial data and analytics, is at the nexus of the new space economy, developing and sustaining its infrastructure and delivering products, services, systems and solutions that make it possible. As a trusted partner, Maxar Technologies provides unmatched end-to-end advanced systems capabilities and integrated solutions expertise to help our customers anticipate and address their most complex mission critical challenges with confidence. With more than 6,500 employees in 31 locations, the Maxar Technologies portfolio of commercial space brands includes: SSL, MDA, DigitalGlobe, and Radiant Solutions. Every day millions of people rely on Maxar Technologies to communicate, share information and data, and deliver insights that build a better world. Maxar trades on the Toronto Stock Exchange and New York Stock Exchange as MAXR. For more information visit maxar.com.

 

  • Like 1

SpaceX's StarLink is the big recipient : $500 million from Fidelity Investments.

 

https://www.cnbc.com/2018/04/10/space-angels-q1-report-small-rockets-backed-by-silicon-valleys-money.html

 


Investors pour nearly $1 billion into space companies in Q1

The space industry started the first quarter of this year the way it ended the last  with hundreds of millions of dollars worth of private funding flowing into commercial space companies.

There were 20 deals worth nearly $1 billion in the space industry in the first quarter, according to investment firm Space Angels  though $500 million of that was a single deal: A big investment from Fidelity Investments in Elon Musk's SpaceX to develop its constellation of 4,425 broadband satellites.

Small rockets  typically priced between $2 million to $5 million per launch  have been a dominant theme this year, especially thanks to Rocket Lab's first orbital launch of its Electron vehicle in January. With Vector and Virgin Orbit also pushing to reach orbital launch this year, these rocket builders are hoping to seize a part of the premium market to launch small satellites.

"We see the entry of small launch vehicles as a specialization within the sector and an indication that commercial launch is maturing," Space Angels CEO Chad Anderson wrote in the report.
>

  • Like 1

This stuff IS going to happen and it is going to be awesome! How awesome would if be to have a subscription to this and have access through some receiving stations that you can easily bring with you anywhere on the planet!

 

"I am going on vacation but will there be internet?"... "Who cares, just bring your own :D"

 

I'd be soooooooooooooooo happy to have proper internet anywhere and no longer having to rely on poopy wifi's that are shared with a ton of others, crapping out all the time because a couple of phones to many are hooked up at once :x

  • Like 1
6 minutes ago, Beittil said:

This stuff IS going to happen and it is going to be awesome! How awesome would if be to have a subscription to this and have access through some receiving stations that you can easily bring with you anywhere on the planet!

 

"I am going on vacation but will there be internet?"... "Who cares, just bring your own :D"

 

I'd be soooooooooooooooo happy to have proper internet anywhere and no longer having to rely on poopy wifi's that are shared with a ton of others, crapping out all the time because a couple of phones to many are hooked up at once :x

I may be missing something, but doesn't satellite broadband require a satellite at the receiving end also? I'm pretty sure that's how it used to work at least. I suspect you'll still need a satellite/router to be able to access this rather than the whole world acting as one giant hotspot.

  • Like 1

Well, it won't exactly be like those monolithic TV broadcast sats where you need to point a big dish at some fixed point in the sky. Here it will more likely be some custom Starlink antenna that you could literally plop on the roof of your car even and still enjoy perfect internet.

 

Hell this network has even been linked to an investigation by the Air Force to see if they can stick these things on war fighter planes to have real time updates & communication between units over the internet through Starlink.

  • Like 1

Think of it more like Sirius/XM antennas, but a bit wider for the dB gain. More antenna = better signal. Plus Starlink and other Satellite Internet that works this way is omnidirectional, and is higher power than something like HughesNet which isn't either.

 

:yes: New 'n Tasty is what this is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • PDF-XChange Editor 11.0.1.0 by Razvan Serea PDF-XChange Editor is a comprehensive PDF editor that allows you to create, view, edit, annotate, and digitally sign PDF documents with ease. With advanced features like OCR, document security, and PDF optimization, PDF-XChange Editor is a powerful tool for both personal and professional use. Whether you need to edit text, images, or links, or add comments, stamps, or watermarks, PDF-XChange Editor provides all the necessary tools to make your PDFs look perfect. Additionally, it supports a wide range of file formats, including PDF, XPS, and DOCX, making it easy to convert and share your documents. PDF-XChange Editor key features: Edit text and images in PDF documents Add and remove pages from PDF files Annotate and markup PDFs with comments, highlights, and stamps Use OCR to convert scanned documents into searchable text Create and fill out PDF forms Sign and certify PDF documents digitally Add and edit hyperlinks within PDFs Extract text and images from PDF files Batch process multiple PDF files at once Customize the interface to your preferences Work with multiple documents in tabs Convert PDFs to other formats such as Word, Excel, and HTML Use advanced redaction tools to permanently remove sensitive information Add customizable headers and footers to PDFs Merge multiple PDF documents into a single file Split PDF documents into multiple files Add watermarks to PDF documents Use the measurement tools to calculate distances and areas in PDFs ....and much more PDF-XChange Editor 11.0.1.0 changelog: Fixed a crash in the new Open/Save dialog box when creating a new folder in an unavailable network path. (49552) Fixed a rare/infrequent crash on some dynamic XFA forms after changing their field values. [installer] Fixed an issue where shortcuts were lost during an upgrade from the previous version. [installer] Fixed an issue preventing migration of serial keys during updates from version 10. Fixed the issues with the shell context menu after installation of version 11. Fixed the issue with filtering comments. (49478) Fixed the issue that caused "Error [IO subsystem]: Invalid access mode." when converting PDFs to MS Office formats. Fixed an issue with the context menu position on some multi-monitor systems. (48467) Fixed an issue with handling complex custom file filters, displayed by JS, in the new Open/Save Files dialog box. (49486) Fixed several issues with the new 'Select Folder' dialog box. (49505) Fixed an issue with the new custom 'Open File' dialog box when using double-click to open it. (49498) Fixed an 'infinite' loop/proliferation in the 'Open Files' and 'Manage Places' dialog boxes. (49526) Fixed an issue with handling the mouse wheel inside the document "Find" box. (49539) Fixed an incorrect behaviour in the 'Go back (Alt+Left)' button in the new Open/Save Files dialog box. (49510) Fixed an issue with the shortcut keys (Alt+Left/Right) after navigating via breadcrumb paths in the new Open/Save Files dialog box. (49554) [installer] Fixed an issue with redrawing the progress text in the EXE installers. Fixed the issue where a mouse click outside of the polyline/polygon context menu during annotation creation would cancel the annotation. (49475) We switched back to using the system Open/Save/SelectFolder dialog box by default, instead of using the new one, because some popular features such as the QuickAccess/Recent items are missing in the new version. These will be added in a future release. Replaced the 'Extension' column in the new Open/Save File dialog box with a more user-friendly 'Type' column. Also fixed some issues when handling the 'Show file extension' option. (49497) Added the ability to authenticate local network shares in the new Open/Save Files dialog box. (49557) Improved the handling of dates after 01.01.2030 in XFA files - now such dates are stored properly when set via the dropdown widget. Flags NoZoom and NoRotate are now respected for only a limited subset of annotations. Download: PDF-XChange Editor (64-bit) | Portable ~300.0 MB (Shareware) Download: PDF-XChange Editor (32-bit) | Portable ~200.0 MB Download: PDF-XChange ARM64 | 276.0 MB Download: PDF-XChange Portable @PortableApps.com | 97.0 MB View: PDF-XChange Editor Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Still 3x what it should cost. So, it seems the trick is to increase price by 6x so that a reduction in price back to 4x looks like a steal. "You savvy shoppers win again!" I'm glad I'm not in a desperate spot to actually even need this overpriced crap. Hopefully, it comes back down by the time for when (or if) I ever do.
    • Although AI is great and has it's use cases they likely have massively overhyped it and it has not delivered as per their expectations. I fully expect them to start saying the same things again when it does get to a certain level of intelligence!
    • Microsoft wants to end printer driver headaches with Windows Ready Print by Usama Jawad A few days ago, Microsoft released Windows 11 Experimental build 26300.8553, bringing a ton of enhancements such as Start menu customization, search improvements, Taskbar polish, and other minor UI tweaks. Another relatively major enhancement snuck deep within the change log was related to upgrades to the Windows printing experience. Now, Microsoft has shared more details about these benefits. For starters, Microsoft has renamed its Modern Print Platform to Windows Ready Print. The company believes that this name highlights its shift in strategy, which now focuses on modernizing, securing, and streamlining the printing experience for Windows devices. Some of the upgrades present in Windows Ready Print have already been seeded to customers and partners. This includes ending support for third-party printer drivers via Windows Update and transitioning towards the Internet Printing Protocol (IPP) and the native Windows IPP printer driver. In line with these changes, new printer installations will default to Windows Ready Print on eligible devices starting from July 2026. However, Microsoft recognizes that not all environments will be able to migrate to this platform immediately, so it will allow users to choose between installing the printer via Windows Ready Print or the traditional OEM process. Users will be able to toggle this configuration through Settings > Bluetooth & Devices > Printers & Scanners > Printer preferences. This control applies only to new printer installations, and its functionality can also be modified via Group Policy as follows: Launch Group Policy Editor Navigate to Local Computer Policy -> Administrative Templates -> Printers Find and select 'Configure Windows Ready Print driver ranking' -> double click to open it Select 'Enabled' (if you wish to enable Windows Ready Print driver selection) or 'Disabled' (if you wish to explicitly disable Windows Ready Print driver selection). Select Apply Select OK Similarly, if you set up Windows protected print mode through the same setting in Windows 11, it will also default to using Windows Ready Print exclusively. Microsoft hopes that these improvements will help eradicate dependency on OEM-specific driver installation processes and simplify printer installations. We'll likely find out more about other tangible benefits in the coming months.
  • Recent Achievements

    • One Month Later
      johnjacobb40 earned a badge
      One Month Later
    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      PsYcHoKiLLa
      231
    3. 3
      +Edouard
      138
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!