It's Official: Russia And The US Will Work Together on The First-Ever Moon Station


Recommended Posts

"While some may still debate whether the world is in the midst of another Cold War, the Space Race, at least, does not look set for a redux. In fact, Russia and the U.S. have just agreed to work together on building the moon's first space station."

 

"There are no borders in space." :D 

 

It's Official: Russia And The US Will Work Together on The First-Ever Moon Station

 

Russia and US will cooperate to build moon's first space station

 

NASA and Roscosmos to study Deep Space Gateway

 

NASA and Russia Partner Up for Crewed Deep-Space Missions

 

 

(Superb) Russian space writer Anatoly Zak of russianspaceweb.com publushed a good article on the Planetary Society site a few months ago. The preparation for this took quite some time, including meetings with the various ISS partners.

 

http://www.planetary.org/blogs/guest-blogs/2017/20170309-nasa-iss-partners-cislunar-station.html

 

RSW: http://www.russianspaceweb.com

  • Like 3
  • 4 months later...
Quote

 

This Was a Huge Week for the NASA-Russia Lunar Space Station and the Future of Spaceflight

 

Major discussions in Tokyo this past week could decide the future of space exploration for decades to come.

 

 

  • Like 3

There's much going on with the US side coming to terms with using commercial operators for habitats, cargo and personnel delivery.  Look for a Cislunar COTS program sooner than later, with SpaceX, Lockheed Martin, Boeing, OrbitalATK, Bigelow Aerospace and Sierra Nevada in the mix.

 

There have also been hints from VP Mike Pence's Chief of Staff that Falcon Heavy could figure prominently, the US VP also chairing the National Space Council.

 

SpaceX's BFR & BFS are also lunar-capable, needing only to fuel up in LEO to do a direct lunar landing and return to Earth. We now know the factories will be in San Pedro California and at KSC, and that NASA and the US Dept. of Transportation have taken notice of its broad capabilities.

 

The Russian side is also spinning up with the new Soyuz family in development, and the Federation spacecraft well along.

  • Like 1

There's much going on with the US side coming to terms with using commercial operators for habitats, cargo and personnel delivery.  Look for a Cislunar COTS program sooner than later, with SpaceX, Lockheed Martin, Boeing, OrbitalATK, Bigelow Aerospace and Sierra Nevada in the mix.

 

There have also been hints from VP Mike Pence's Chief of Staff that Falcon Heavy could figure prominently, the US VP also chairing the National Space Council.

 

SpaceX's BFR & BFS are also lunar-capable, needing only to fuel up in LEO to do a direct lunar landing and return to Earth. We now know the factories will be in San Pedro California and at KSC, and that NASA and the US Dept. of Transportation have taken notice of its broad capabilities.

 

The Russian side is also spinning up with the new Soyuz 5 family in development, which includes a heavy lifter, and the Federation spacecraft well along. Also some interesting new habitat modules.

 

Japan and ESA have many items to contribute, with JAXA, ESA, Thales, Ariane, etc. well along.

 

China could contribute heavy lift if their Long March 5 Y2 could be made to behave, very likely - they're good and getting better, and Ukraine is developing a commercial heavy lifter named Crypton.

 

That's a wealth of riches..

I agree completely with the article above. There needs to be commonality with all segments, components and parts. No mismatches, adapters, none of those things which will only complicate matters or reduce the efficiency of the systems or the components.

 

The power grid is a different matter entirely -- but by then we get into another barrel of fish that I'm just not in the mood to deal with right now. :laugh: Let's leave it at "I wouldn't use 120/240 on the main bus for any reason".

7 minutes ago, Unobscured Vision said:

The power grid is a different matter entirely -- but by then we get into another barrel of fish that I'm just not in the mood to deal with right now. :laugh: Let's leave it at "I wouldn't use 120/240 on the main bus for any reason".

Actually, that's an easy fix, the biggest investor into the program can dictate the power requirements. Plus most nations already have power blueprints for every other nation, that and switchable power supply units.

6 hours ago, Riva said:

Oh did the americans get over their "our new space station will be bigger" statements? :D

Actually, a single BFS Spaceship in Earth or lunar orbit will be configurable to have 40+ cabins, a command deck, cargo deck, public spaces deck   with a galley, a life support system good for about 100 people, etc.

 

A single Bigelow station module could be from 330 m3 to 2,200 m3, the latter more than 2x the size of ISS.  

  • Like 1
  • 2 months later...

 

The nuts and bolts of a US Cis-Lunar commercial services  program for the Gateway is already underway in NextSTEP 2,  Connercial Crew and Commercial Resupply Services 2 with more coming. SpaceX's ginormous BFS spaceship should also be there.

 

Russias new Soyuz 5 launcher and Federation crew vehicle should be ready by then, as should a Soyuz 5 based heavy lift launcher.

 

http://m.aviationweek.com/space-symposium/russia-wants-lunar-gateway-be-global-project

Quote

Russia Wants Lunar Gateway To Be Global Project

COLORADO SPRINGS—The International Space Station (ISS) partnership should take on the development and operation of NASA’s planned Lunar Orbital Platform-Gateway as part of an expanded, multilateral approach to space exploration and development, Sergei Krikalev, director of human spaceflight for the Russian space agency Roscosmos, said April 18.


NASA intends to build the gateway beginning with the 2022 launch of a power and propulsion module. The outpost is intended to serve as a staging platform for human sorties to the lunar surface and a base to assemble spacecraft for eventual journeys to Mars.

Roscosmos proposes to add a research module to the gateway and fly crews there using a superheavy-lift rocket and manned spaceship.

"We see this new international initiative as a sequel of the International Space Station program to be built under the same principles ... as an international project without the primacy or the priority of one of the participating partners," Krikalev said at the 34th Space Symposium here.

>

  • Like 1

This Axiom Space  proposal from former ISS managers and tech people has evolved a bit in the last year or so, particularly the radiator/solar module and the use of a module based on Cygnus, and parts of it are being considered for the LOP-Gateway station.

 

(Lunar Orbital Platform-Gateway)

 

It's possible something like this + a Bigelow module could make up much of the Gateway.

 

3D model for browsers

 

https://sketchfab.com/models/45cb595ccdd8406ebd040d97c58e354a/embed


5ae2a2b083487_AxiomSpace800-4.thumb.jpg.f74459666988f9101c5fb49514cec3a4.jpg

Edited by DocM

- The arrangement/design of the Solar Array is horrible. Completely over-complicated and impractical, lacking in redundancy and far too large of a footprint for too little gain;

- Not to mention that the Solar Array in the "sunflower" configuration renders the top attachment node permanently unuseable;

- And why is the long axis of the proposed Station covered in curved PV's? All this serves to do is introduce an inefficiency;

- Using Cygnus and Bigelow habs would be fine, but I'm not seeing anything here that really makes full use of Bigelow's advantages;

 

And that's just glancing at the above image.

 

I cannot believe for one moment that this configuration is in the running as-is. That SA section alone is terrible and too complicated. I'd hope they would seriously vet this and make changes. What's wrong with structural girders and 90-degree long panels? The efficiency is through the roof now, and they can mount the radiators (and lots of other external gear) to 'em. So what if girders are "dumb" -- they work.

I'm no fan of those turkey's tail segmented arrays either. 

 

ISTM,

 

conformal arrays can serve a dual purpose in that they generate power while minimizing solar heating by blocking the sun from the underlaying habitat. The trick is the insulation (aerogel?) or using a standoff mount.

 

In the case of Crew Dragon/Dragon 2 a conformal array is used to  eliminate a failure mode (failed deployment), and to eliminate orbital debris (the covers.) Any excess heat gets dumped by radiators on the other side of the Trunk, along heat from the capsule.

Edited by DocM
  • Like 1
  • 3 months later...

Anatoly Zak of RussianSpaceWeb is reporting the European Space Agency (ESA) and Japan Aerospace Exploration Agency (JAXA) are considering SpaceX's Falcon Heavy for their large LOP-G payloads. Falcon Heavy can toss about 20,000kg to a trans-lunar injection (TLI) while still recovering the boosters.

  • Like 1

It's a running thread. :yes: Updates as they come in ... sometimes those updates are few and far between.

 

Unlike what seems to be happening on the Tesla Megathread, which has been hijacked by anarchist enablers who hate anyone with money or who display any kind of success acumen. Seems like those people would be fans of Elon like the rest of us are. Electric Cars, Reusable Rockets, trying to help the world go renewable, etc. etc. ....

 

But then again those folks don't really logic -- or care what reality is.

  • Like 2

"The economics of the future is somewhat different. You see, money doesn't exist in the 24th century. The acquisition of wealth is no longer the driving force in our lives. We work to better ourselves and the rest of humanity." -Picard

  • Like 1
  • 2 weeks later...
This topic is now closed to further replies.
  • Posts

    • If Valve refused to let them make the case, I wonder if they've already partnered with someone else to do it? The fact that they didn't seek permission/licence before diving straight in is incredible though
    • OpenClaw now has native mobile apps on iOS and Android by Karthik Mudaliar OpenClaw, the viral open-source personal AI agent, now has its own mobile app, available on both Android and iOS. Users can pair the app with an existing OpenClaw gateway and can start using new mobile-native features that are now available on the app. The app supports all the existing features you'd already have seen on OpenClaw's TUI, as well as some more, such as real-time and background Talk mode, action approvals, sharing from iOS, and optional access to device capabilities such as camera, screen, location, photos, contacts, calendar, and reminders. These features are available on both the Android and iOS versions of the app. What's important with these apps is that they don't run OpenClaw on your phone, but are actually just companion apps that require a running OpenClaw Gateway on an existing device, on macOS, Linux, or Windows via WSL2. To pair the app with your existing OpenClaw gateway, users need to run the command "/pair qr" on the TUI or existing chat interface, which brings up a QR code. Users can then scan this QR code to pair it up with the mobile app. There's also an option to manually pair the app by entering the host and a port. Previously, OpenClaw had been available on phones via WhatsApp, Telegram, Slack, Discord, Microsoft Teams, Matrix, and others. Now, with a native mobile app, the interface is much cleaner and more focused on just the OpenClaw, of course, with the added support for camera, screen, location, and more. It's important to note that OpenClaw comes with its own security warnings. There's always a chance of prompt injection with these tools, so users are recommended to double-check authentication, tool policy, sandboxing, and execution approvals rather than prompts alone. For users well-versed with the AI harness, a native mobile app makes it easier to approve an automation, share a link, use voice, or let an agent react to phone-side context.
    • Google pitches Spanner as one database for all AI agents with these new featues by Karthik Mudaliar Google Cloud is introducing new features within Spanner, its distributed database, as a place where enterprises should keep their data, using which AI agents could make smarter and better decisions. In a detailed blog post, Google highlighted quite a few features coming to Spanner, including relational data, graph relationships, vector search, key-value access, full-text search, and operational analytics together in one database architecture. Google says that today's systems aren't well-made for AI agents. There could be data that is present in one system, search indexes in another, embeddings in a vector database, and relationship data in a graph database. This fragmentation isn't great for AI agents to do their jobs because they don't have access to all of this data in one place. This is where Google is positioning Spanner as a solution. Spanner is already a globally distributed relational database with strong consistency, and Google wants its customers to see it as a broader data layer for AI applications. The company introduced something called Spanner Graph, along with integrated vector search, full-text search, a Cassandra-compatible key-value endpoint, and a columnar engine for analytical queries on operational data. Google also added that its ScaNN-powered vector search can support indexes with more than 10 billion vectors, while the columnar engine can make some analytical scans up to 200 times faster. All of this isn't just exclusive to the Google Cloud Platform, and there's support for multi-cloud as well. This comes via Spanner Omni, which Google says is a downloadable, containerized version of Spanner that can run on Kubernetes and in environments outside Google Cloud, including Microsoft Azure and AWS, and even on-premises infrastructure as well as edge deployments. Google says that customers who are interested in the full-featured edition should contact the company, and there's no word on commercial availability or separate pricing. Those interested can read the full blog by Google Cloud, which details these features individually.
    • Kalmuri 4.2.5 by Razvan Serea Kalmuri is your all-in-one, portable screen capture and recording solution designed for speed, simplicity, and flexibility. Whether you need a full-screen snapshot, a custom area, a scrolling webpage, or smooth video recording, Kalmuri delivers with ease. Capture text instantly from images with built-in OCR, keep floating images on top for quick reference, and use the precise color picker for perfect design matching. Customize hotkeys to work your way and share results instantly with built-in upload options. Kalmuri runs without installation, making it ideal for USB use, and offers an intuitive interface that’s easy to learn. Kalmuri key features: Video recording support (designation of whole screen and area) Whole screen, active program, window control, area application Extract text from images using optical character recognition (OCR). Support for PNG, JPG, WEBP, BMP, GIF file formats MP4 video recording powered by FFmpeg for high-quality results Full web page capture Share the captured image on the web Color extraction function Printer output Hotkey settings Adjustable via keyboard for area capture (Arrow key, Ctrl+Arrow key, Shift+Arrow key) File name format (sequential, datetime) Free to use it at work, at home, in government offices, at school, etc. Using Kalmuri portable for video recording Kalmuri’s portable version doesn’t include FFmpeg, which is required for video recording. Without it, you’ll get an “error FFmpeg.exe not found” message. To fix this, download FFmpeg from the provided link, extract it, and place FFmpeg.exe in Kalmuri’s folder. Kalmuri will then recognize it automatically, allowing you to start recording in high quality instantly. Kalmuri 4.2.5 changelog: Fixed an intermittent crash when using Area Capture Improved stability for Area Capture and screen recording Resolved a capture issue that could occur right after startup Download: Kalmuri 4.2.5 | 24.2 MB (Freeware) Download: Kalmuri Portable 4.2.5 | 2.1 MB View: Kalmuri Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • First Post
      rosiecharles earned a badge
      First Post
    • Reacting Well
      Juan Dela earned a badge
      Reacting Well
    • Week One Done
      Collagen Project earned a badge
      Week One Done
    • Reacting Well
      Wakeen1966 earned a badge
      Reacting Well
    • Rookie
      Almohandis went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      273
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      Steven P.
      98
    5. 5
      macoman
      54
  • Tell a friend

    Love Neowin? Tell a friend!