Recommended Posts

Launch site: Vandenberg SLC-4E
Launch date: February 17, 2018
Launch window: 0922 Eastern, 0622 Pacific (1422 UT) 
Core: B1038.2 (FormoSat-5)
Stage recovery: no

 

3 major payloads 

 

PAZ

Owner: HisdeSat (Spanish govt)
Builder: Astrium España
Type: X-Band synthetic aperture radar
Mass: ~1,400kg
Orbit: 505km sun-synchronous polar orbit

 

MicroSat 2a and 2b

Owner: SpaceX 
Builder: SpaceX 
Type: StarLink data constellation test 
Mass: ~386kg (each)
Size: ~1.1×0.7x0.7m
Solar: ~2×8m (x2)
Comms: Ku-Band, laser
Propulsion: Hall effect electric thrusters
Orbit: 514×514km
Inclination: 97.44°

 

PAZ
paz__1.jpg

 

  • Like 1
  • 2 weeks later...
47 minutes ago, anthdci said:

At what point will static fire be forgotten? Do planes do a static engine test before take off? 

What makes you think jet pilots, or their computers, don't check the engine sensors before taking off?

 

You can't do a static fire with solid rockets because they're single-use and the test data on one isn't transferrable to another.

 

Many rockets do a Wet Dress Rehersal (WDR)  where they fill the tanks, do a countdown and stop just before igniting the engines. This stoppage is usually because the engines can endure only a few firings, or sometimes only one.

 

SpaceX's Merlin 1D engines are designed for many firings and reuse, both on test stands and during missions, with little refurbishment.  Over 400 Merlin 1D's have flown, many have reflown, and all underwent several firings before the next launch. It's an extremely tough engine. This allows a Wet Dress Rehersal where they actually fire the engines as a final quality check before launch. 

 

They may discontinue static fires down the road, but as they say; "if it ain't broke, don't fix it."

 

 

8 hours ago, DocM said:

What makes you think jet pilots, or their computers, don't check the engine sensors before taking off?

 

You can't do a static fire with solid rockets because they're single-use and the test data on one isn't transferrable to another.

 

Many rockets do a Wet Dress Rehersal (WDR)  where they fill the tanks, do a countdown and stop just before igniting the engines. This stoppage is usually because the engines can endure only a few firings, or sometimes only one.

 

SpaceX's Merlin 1D engines are designed for many firings and reuse, both on test stands and during missions, with little refurbishment.  Over 400 Merlin 1D's have flown, many have reflown, and all underwent several firings before the next launch. It's an extremely tough engine. This allows a Wet Dress Rehersal where they actually fire the engines as a final quality check before launch. 

 

They may discontinue static fires down the road, but as they say; "if it ain't broke, don't fix it."

 

 

To be honest I was more thinking bfr. Booster goes up, comes back down to the pad. Is refilled and goes up again in the animation. No static fire between..

SpaceX has changed the insertion altitude for MicroSat 2a and MicroSat 2b.  Instead of 514x514km they'll inject to a 511x511km orbit at 97.44°. They'll then use their Hall effect plasma thrusters to raise their orbits to 1,125km.

  • Like 1

5 minute StarLink transmitter test at a Redmond, WA StarLink lab.

 

FCC....

 

Quote

Explanation

This STA is necessary to authorize brief testing of a satellite communications transmitter in Redmond, Washington. The test itself will be under 5 minutes in duration.


Purpose of Operation

The brief test will utilize a directional antenna to transmit along an azimuth/elevation path from one horizon to the other. This is a final verification test of ground equipment prior to the testing performed with the experimental satellite documented in the Experimental License Application, File #0298-EX-CN-2016. Transmission will be of the 13.85 - 14 GHz commanding in said experimental license application.

  • Like 1

Hmmmm.....Fairing 2.0? Supposed to be wider (from 5.2m to 5.4m? Or more?), made longer if needed.

 

 

 

Launch date: Feb 21st 
Backup launch date: Feb 22nd 
Launch time:  0917 EST, 0617 PST (1417 UT)

 

Quote

FOR IMMEDIATE RELEASE

 

From: 30th Space Wing Public Affairs,

www.vandenberg.af.mil

Falcon 9 Paz launch delayed

VANDENBERG AIR FORCE BASE, Calif. - The SpaceX Falcon 9 rocket carrying a PAZ payload from Space Launch Co lex-4, is delayed to allow for additional time to perform final checkouts of the upgraded fairing. The Falcon 9 and payload remain healthy.

The launch is rescheduled for Wednesday, Feb. 21, at 6:17 a.m. PST.

 

Tidbits from the MicroSat FCC license,

 

Quote

The primary structure for the Microsat-2a and -2b test spacecraft will be a box design measuring 1.1m x 0.7m x 0.7m and carries the spacecraft flight computer, power system components, attitude determination and control components, propulsion components, GPS receiver, and broadband, telemetry, and command receivers and transmitters. The primary bus is mounted on the payload truss system, which also carries communications panels, inter-satellite optical link transmitters and receivers, star trackers, and a telemetry antenna. There are two 2x8 meter solar panels. Each demonstration spacecraft has a total mass of approximately 400kg

 

  • Like 1

We could easily consolidate launch topics into a format l where every launch doesn't have its own topic. It is not exactly NSF here in levels of reactions and viewing :p

 

And with launch cadence in the elevator going up... Might as well just do something like:

 

SpaceX west coast launches

SpaceX east coast launches 

SpaceX general topic

SpaceX General could remain the Updates thread. 6 of one....

 

I was thinking West/East/Boca Chica threads soon - in H2 2018 it's gonna be rapid fire, then get faster as StarLink and BFR tests ramp up.

 

How about starting them with the first Block 5 mission?

 

I understand they are moving on to block 5 so there's no real reusability with the first stage here and therefore they aren't recovering but is there a reason why they don't just do it anyway? I know they're pretty successful on recovery now but surely it can still present an opportunity to learn? I assume it's a purely financial decision, in that it costs more to recover?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • RustDesk 1.4.8 by Razvan Serea RustDesk is a fast, secure, and open-source remote desktop software designed for self-hosting, remote access, and IT support. It provides a privacy-focused alternative to TeamViewer and AnyDesk, offering full control over your data with minimal configuration. The client is fully open source, while users have the option to choose between two server solutions: the Professional Server, a premium offering with advanced features available for purchase, and the Basic Server, a free and open-source alternative for those who prefer a self-hosted setup. RustDesk features Open-source & free remote desktop solution Cross-platform compatibility – Works on Windows, macOS, Linux, iOS, Android, and Web End-to-end encryption (E2EE) based on NaCl for secure connections Peer-to-peer (P2P) connectivity for fast and private remote access Self-hosting support – Own your data with easy deployment on your infrastructure Supports VP8, VP9, AV1 (software) and H264, H265 (hardware) codecs for efficient streaming Unattended access for remote management File transfer & clipboard sharing Multi-monitor support & remote printing Low-latency & high-performance remote access Session recording & chat functionality Professional & Basic server options for flexible deployment Lightweight & minimal resource usage No third-party server dependency for privacy No installation or admin privileges needed on Windows (elevate privileges locally or remotely on demand) Easy installation & minimal configuration required Custom branding & enterprise-level features available RustDesk 1.4.8 changelog: Added Add Windows arm64 support #15139 Feature: Add monitor-switch buttons to remote toolbars #15342 Refact/privacy mode 1 multi monitors #15321 autocomplete online #15313 feat: theme logo #15268 Changes refact: restart remote device, autoconnect #15290 refact(oidc): icon azure to microsoft #15278 Refact/printer driver default unchecked #15191 Revert "fix(iPad): keep touch gestures with external mouse" #15288 Fixes fix Wayland→Wayland clipboard paste fix(arm64-linux): fix CJK font rendering on flutter-elinux #15324 iOS: autocorrect/data detectors corrupt the server Key field (ID/Relay Server settings), making valid keys impossible (or very hard) to enter #15293 fix(ios): mouse mismatch #15339 fix(linux): reap leftover logind session procs on headless teardown #15337 Crash on startup (0xc0000409) / Fast Fail in librustdesk.dll on Windows 11 26H1 #15218 fix(clipboard): Windows DIB images, fill missing alpha #15296 Fix/generate py target injection #15248 Fix clipboard synchronization not fully disabled in View Only mode #15224 fix(keyboard): win, key, Pause #15351 Download: RustDesk 64-bit | MSI | 32-bit ~20.0 MB (Open Source) Links: RustDesk Home Page | Other platforms | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This makes me think of Dune for some reason.
    • I'm too old to return to the "good old days" when I was installing custom ROMs and tinkering with my devices - now I just want to turn it on and use it. I've read that banking and payment apps work on Murena /e/OS (I'll have to check the ones I use) and I also really want to support Fairphone 😉
    • Time to start going to the local church and play Bingo for a while.
  • Recent Achievements

    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      503
    2. 2
      +Edouard
      203
    3. 3
      PsYcHoKiLLa
      98
    4. 4
      Michael Scrip
      80
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!