Recommended Posts

Hello all,

I recently acquired a Dell Optiplex 990 Ultra Small Form Factor with an i5 processor and 4Gb ram. 

It came from an office with no information. other than "the PC was wiped"

I booted it up, and it loaded a W10 type login screen with the user name "Administrator" and password entry box.

I had no password though, and thought, well I like W7 fine so I'll just stick W7 on a USB and install a fresh OS.

 

I entered the bios and set to boot from USB with the W7 install media, it seemed to go ok but then came up with  this screen

  Quote

Load Driver

A media driver your computer needs is missing. This could be a DVD, USB, or Hard Disk driver. If you have a  CD, DVD, USB flash drive with the driver on it please insert it now

Note; If the installation media for windows is in the DVD drive or on a USB drive you can  safely remove it for this step.

 

Expand  

At some point I'm sure there was a repair option which said "unable to repair, OS is missing".

 

So, I thought to myself it must be the W7 install media, I made a fresh one using a different W7 DVD and the media creation tool, but that didn't work and just gave the same "Load Driver" error.

 

Next I decided to try a W10 install,  I used the MS tool to download and create a fresh USB installation media, and booted off it  It gives the same "Load Driver" error message

 

If I try to boot from the Hard Drive, I no longer get a W10 login/password screen,  I now get a screen which says;

  Quote

Boot Configuration Data is missing or contains errors

File:\Boot\BCD

Error Code 0xc000000f

Expand  

The pc then restarts itself and loops.

Somehow I think I have broken something in my haste to get the PC up and running with W7, and really want to install W10 instead.

I can get to Command Prompt after booting with the W10 install media, but am not sure what to do next.

 

 

Any help greatly appreciated, no rush,  small simple steps for a novice pls :)

 

Link to comment
https://www.neowin.net/forum/topic/1362614-bootinstall-issue/
Share on other sites

The easiest solution is to get an install disk that came with that computer, the harder solution will be to slip stream the sata controller and the chipset into the iso and reburn/iso to usb the install media with the updated drivers.

 

Which way do you want to go?  Can't get the install disk that came with the computer/don't want to call dell and pay for it, looks like you are slip streaming.  

  On 30/04/2018 at 13:15, Eric said:

Can you get to the part of the clean install where it has an option for "repair?" You might be able to open a CLI and use diskpart to completely wipe the partition table.

 

Also, perhaps F6 drivers from here if it's Intel-based.

Expand  

I can get "repair" when booting with the W10 USB, all the repair options fail except Command Prompt, but don't know any commands to input.

What are F6 drivers, will it not work without them?

  On 30/04/2018 at 15:00, Mando said:

if your trying to install W7, you need to change the devices to Legacy or RAID (from AHCI) on Opti 990s.

 

If W10 set it as AHCI.

 

boot to the media and install as norm.

 

 

Expand  

Thanks, I'll check that, It's W10 I really want to install.

 

  On 30/04/2018 at 15:15, sc302 said:

The easiest solution is to get an install disk that came with that computer, the harder solution will be to slip stream the sata controller and the chipset into the iso and reburn/iso to usb the install media with the updated drivers.

 

Which way do you want to go?  Can't get the install disk that came with the computer/don't want to call dell and pay for it, looks like you are slip streaming.  

Expand  

No I don't have the install disk, as far as I know it was originally a W7(there's a W7 sticker on the machine), and got the W10 upgrade before becoming surplus to the office who were disposing of it.

I wouldn't have a clue how to slipstream the sata or chipset, do you mean that those must be the causing the missing device driver error I get ?

  On 30/04/2018 at 15:25, Nick H. said:

Well you have a USB and a computer that doesn't seem to like Windows at the second. What about a live Linux USB? What does that throw up for errors?

Expand  

No, I haven't tried a Linux Live USB, I'll need to track one down

  On 30/04/2018 at 11:54, He's Dead Jim said:

Hello all,

I recently acquired a Dell Optiplex 990 Ultra Small Form Factor with an i5 processor and 4Gb ram. 

It came from an office with no information. other than "the PC was wiped"

I booted it up, and it loaded a W10 type login screen with the user name "Administrator" and password entry box.

I had no password though, and thought, well I like W7 fine so I'll just stick W7 on a USB and install a fresh OS.

 

I entered the bios and set to boot from USB with the W7 install media, it seemed to go ok but then came up with  this screen

At some point I'm sure there was a repair option which said "unable to repair, OS is missing".

 

So, I thought to myself it must be the W7 install media, I made a fresh one using a different W7 DVD and the media creation tool, but that didn't work and just gave the same "Load Driver" error.

 

Next I decided to try a W10 install,  I used the MS tool to download and create a fresh USB installation media, and booted off it  It gives the same "Load Driver" error message

 

If I try to boot from the Hard Drive, I no longer get a W10 login/password screen,  I now get a screen which says;

The pc then restarts itself and loops.

Somehow I think I have broken something in my haste to get the PC up and running with W7, and really want to install W10 instead.

I can get to Command Prompt after booting with the W10 install media, but am not sure what to do next.

 

 

Any help greatly appreciated, no rush,  small simple steps for a novice pls :)

 

Expand  

For Windows 7, it sounds like your device is so new, that it needs the SATA drivers. You can download these from Dell or Intel, and put them on the USB stick in a different folder, then select them when asked for the driver. Windows 7, definitely works with AHCI, you can even load Windows 7 via UEFI install. Don't worry about changing that part.

 

For Windows 10, are you trying to install this via a USB3 port on the computer? Generally these are blue in color, if so, try using a standard 2.0 port and I bet your error message goes away when attempting to install Windows 10. 

 

Let me know if you have any more questions.
 

  On 30/04/2018 at 17:24, He's Dead Jim said:

No I don't have the install disk, as far as I know it was originally a W7(there's a W7 sticker on the machine), and got the W10 upgrade before becoming surplus to the office who were disposing of it.

I wouldn't have a clue how to slipstream the sata or chipset, do you mean that those must be the causing the missing device driver error I get ?

Expand  

You can use nLite or vLite I forget which works with 7 and above, but honestly the easier way is to load them into your USB under a folder that you can browse to when asked for them. This is if you want to install Windows 7.

 

  On 30/04/2018 at 20:12, Circaflex said:

For Windows 10, are you trying to install this via a USB3 port on the computer? Generally these are blue in color, if so, try using a standard 2.0 port and I bet your error message goes away when attempting to install Windows 10. 

Expand  

This is a good point, I've heard of several people having issues installing if usb is plugged into a usb3 port but moving the usb stick to a 2.0 port worked great.

  On 30/04/2018 at 20:45, Brandon H said:

This is a good point, I've heard of several having issues installing if plugged into a usb3 port but moving the usb stick to a 2.0 port worked great.

Expand  

Ya, it drove me nuts on a few builds because I was either in a rush or not paying attention. Some work, but I have a feeling those that don't are just too new for the install media thus resulting in strange errors about the media installation not being found.

  On 30/04/2018 at 17:24, He's Dead Jim said:

 

 

No I don't have the install disk, as far as I know it was originally a W7(there's a W7 sticker on the machine), and got the W10 upgrade before becoming surplus to the office who were disposing of it.

I wouldn't have a clue how to slipstream the sata or chipset, do you mean that those must be the causing the missing device driver error I get ?

 

Expand  

Yes.

  On 30/04/2018 at 17:24, He's Dead Jim said:

I can get "repair" when booting with the W10 USB, all the repair options fail except Command Prompt, but don't know any commands to input.

What are F6 drivers, will it not work without them?

Thanks, I'll check that, It's W10 I really want to install.

 

No I don't have the install disk, as far as I know it was originally a W7(there's a W7 sticker on the machine), and got the W10 upgrade before becoming surplus to the office who were disposing of it.

I wouldn't have a clue how to slipstream the sata or chipset, do you mean that those must be the causing the missing device driver error I get ?

No, I haven't tried a Linux Live USB, I'll need to track one down

Expand  

To completely wipe the HDD from the repair command prompt:

 

1. run "DISKPART"

2. Type "LIST DISK". It will show you a list of the hard drives it sees installed. If there aren't any then the rest of this won't work. :(

3. Find your HDD in the list. It shows the sizes in gigabytes. Select it by typing "SELECT DISK X" where "X" is the number on the list.

4. Make sure you selected the right drive as the next command will wipe it out!

5. Type "CLEAN". That should remove all of the partitions and set the drive to raw.

6. Type "EXIT" and see if it finds everything.

This topic is now closed to further replies.
  • Posts

    • Mozilla fixes Firefox crashes on Windows by Taras Buria Mozilla is rolling out yet another update for the Firefox browser. Version 140.0.2 follows the just-released version 140.0.1 to address more bugs causing crashes on Windows in certain scenarios. Here is what the release notes say: Fixed a startup crash on Windows experienced by some users. (Bug 1974259) According to a post on Bugzilla, Mozilla's bug tracker for Firefox, the browser crashes with the ERROR_INVALID_HANDLE or ERROR_INVALID_PARAMETER error. This happens when Exploit Protection is enabled in Windows security settings. While that is a feature a regular user is unlikely to fiddle with, Exploit Protection is enabled for apps from the Microsoft Store. As such, crashes are most likely occurring for users with Firefox downloaded from the Microsoft Store. Still, if Exploit Protection is enabled globally, "standard" Firefox downloaded from the official website also fails. Note that the bug does not affect newer Firefox versions. Now, with Firefox 140.0.2 out, the browser should no longer crash regardless of your security settings or the browser origin. For reference, you can find the release notes for the latest update here; for version 140.0.1 (which fixed a couple of crash-inducing bugs), here; and for version 140.0 (a major release), here. As usual, you can update Firefox by heading to Menu > Help > About Firefox. The browser is available on the official website, in the Microsoft Store for Windows 10 and 11 users, or on Neowin's Software page.
    • They are always there, available third week every month, not fully public tho
    • Lol, sounds like you're not up to date with reality and are just repeating what the salesman told ya. Here's a little insight for you: Electric Cars Are Way Less Reliable Than ICE Cars, Says Consumer Reports. Alas, you're entitled to your wrong opinion.
    • misleading its one word to describe what M$ have done, windows 10 perform better on older hardware and even on new hardware sometimes, windows 11 its a mess and no one want to use it for many good reasons, until they listen its customers read the feedback hub comments and maybe backoff its forced requiremens, they are having a vista and 8 moment.
    • Media Player Classic - Home Cinema 2.5.0 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.5.0 changelog: Updated LAV Filters to version 0.80-1-gb9116 Updated MPC Video Renderer to version 0.9.9.2400 Several small fixes and improvements. Graphics Designers Wanted for New Toolbar Buttons A new toolbar is planned for implementation in the player, featuring optional extra buttons and fully customizable layouts. As a result, existing custom toolbar designs will no longer be supported in the future. New button designs are needed, and contributions from graphics designers are welcome. Those interested in helping create the new toolbar are encouraged to read the dedicated information page. Download: MPC-HC 2.5.0 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.5.0 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      emptyother earned a badge
      Week One Done
    • Week One Done
      DarkWun earned a badge
      Week One Done
    • Very Popular
      valkyr09 earned a badge
      Very Popular
    • Week One Done
      suprememobiles earned a badge
      Week One Done
    • Week One Done
      Marites earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      570
    2. 2
      ATLien_0
      181
    3. 3
      +FloatingFatMan
      173
    4. 4
      Xenon
      124
    5. 5
      Michael Scrip
      114
  • Tell a friend

    Love Neowin? Tell a friend!