Recommended Posts

14 hours ago, DocM said:

Yes, they're using drones and two Boston Robotics Spot robo-dogs to do remote observation. The Spots even have dog houses.

 

 

The Wi-Fi network they are on is called "TheLeash"

  • Haha 2

Some good news for SN8, if I understand this right this is more about the pad then the engine itself. Sounds like they may have to dig it up a bit to do some work but that's a much better scenario in my opinion.

 

 

 

 

3 hours ago, IsItPluggedIn said:

Fixing the pad to prevent this is good, however they wont have a nice pad on the moon or mars.

 

Sounds like they may need to do some more shielding on the engine bays.

 

Under the pad they laid a significant amount of Martyte, a refractory thermal protection used to line flame trenches, etc. Tough stuff, but Raptor is a world-class agent of disruption and blew off some large chunks causing the damage.  

 

AIUI they'll be adding a deflector similar to those used at many of McGregor's test stands - steel pipes with water running through them.

 

14 hours ago, DocM said:

 

Under the pad they laid a significant amount of Martyte, a refractory thermal protection used to line flame trenches, etc. Tough stuff, but Raptor is a world-class agent of disruption and blew off some large chunks causing the damage.  

 

AIUI they'll be adding a deflector similar to those used at many of McGregor's test stands - steel pipes with water running through them.

 

I think the point above was more about how the surface of the moon or Mars won't be reinforced in anyway like this so it needs to be protected for that.

 

I would assume they have or are thinking that far ahead but for now it's focusing on variables they can control before they move on to the potential unknowns of other locations.

 

I have wondered why they didn't just bite the bullet and go with a traditional flame trench, I know hindsight is a wonderful thing but I don't think this is the first time they've destroyed a pad and it probably won't be the last.

Starship SN-08 ground test schedule

 

Date: November 23

Window: 1000 - 2200

 

Backup date 1: November 24

Window: 0900 - 1800 Eastern

 

Backup date 2: November 25

Window: 0900 - 1800 Eastern

 

Starship SN-08 15km test flight schedule

 

Date: November 30

Window:  0800 - 1900 Eastern

 

Backup date 1:  December 1

Window: 0900-1800 Eastern

 

Backup date 2: December 2

Window: 0900-1800 Eastern

FAA is evaluating a new EA for Boca Chica..

 

https://www.faa.gov/news/updates/?newsId=96139

Quote

 

SpaceX has informed the Federal Aviation Administration (FAA) that it plans to apply for licenses for suborbital and orbital launches of its Starship spacecraft powered by the Super Heavy rocket at its launch site in Boca Chica, Texas.

 

The proposed update to Starship/Super Heavy operations falls outside of the scope of the existing final Environmental Impact Statement (EIS) and Record of Decision for the launch site and requires additional environmental review under the National Environmental Policy Act (NEPA). 

 

The FAA is in the beginning stages of conducting the environmental review of the SpaceX proposal and developing a public outreach plan. The FAA intends to provide scoping information for the project soon.

 

SpaceX is working with the FAA to prepare a draft Environmental Assessment (EA) which will be subject to the FAA’s evaluation and approval.

The EA will allow the FAA to determine the appropriate course of action: preparation of an EIS because the proposed action’s environmental impacts would be significant; issuance of a Finding of No Significant Impact (FONSI); or issuance of a “Mitigated FONSI” providing for mitigation measures to address the proposed action’s environmental impacts. The FAA may make its determination during the EA process or after SpaceX presents a draft EA for FAA approval. 

 

To receive the licenses, SpaceX must complete a safety review and develop agreements for the license application in addition to the environmental review. 

Information about the FAA environmental review process as it relates to commercial space transportation is posted at faa.gov/space/environmental

 

Starship SN-08 flight test webcast

 

Date: Tuesday, December 8

Backup date: Wednesday, December 9

Time: 0700 Eastern

 

 

As early as Tuesday, December 8, the SpaceX team will make the first attempt of a high-altitude suborbital flight test of Starship serial number 8 (SN8) from our site in Cameron County, Texas. The schedule is dynamic and likely to change, as is the case with all development testing.
 
This suborbital flight is designed to test a number of objectives, from how the vehicle’s three Raptor engines perform, and the overall aerodynamic entry capabilities of the vehicle, including its body flaps, to how the vehicle manages propellant transition. SN8 will also attempt to perform a landing flip maneuver, which would be a first for a vehicle of this size.
 
With a test such as this, success is not measured by completion of specific objectives but rather how much we can learn as a whole, which will inform and improve the probability of success in the future as SpaceX rapidly advances development of Starship.
 
This will be a live feed of the flight test and will start a few minutes prior to liftoff. Stay tuned to our social media channels for updates as we move toward our first high altitude flight test of Starship!

This past year alone, SpaceX has completed two low-altitude flight tests with Starship SN5 and SN6 and accumulated over 16,000 seconds of run time during 330 ground engine starts, including multiple Starship static fires and four flight tests of the reusable methalox full-flow staged combustion Raptor engine. Additionally, with production accelerating and fidelity increasing, SpaceX has built 10 Starship prototypes. SN9 is almost ready to move to the pad, which now has two active stands for rapid development testing.

SN8’s flight test is an exciting next step in the development of a fully reusable transportation system capable of carrying both crew and cargo to Earth orbit, the Moon, Mars, and beyond. As we venture into new territory, we continue to appreciate all of the support and encouragement we have received.

There will be a live feed of the flight test available here that will start a few minutes prior to liftoff. Given the uncertainty of the schedule, stay tuned to our social media channels for updates as we move toward our first high-altitude flight test of Starship!

  • Thanks 1

SpaceX statement,
 

Quote

Due to a Raptor engine auto-abort at T-1 second, the SpaceX team is standing down from Tuesday's attempt of a high-altitude suborbital flight test of Starship serial number 8 (SN8) from our site in Cameron County, Texas. We have additional test opportunities available on Wednesday, December 9 and Thursday, December 10. The schedule is dynamic and likely to change, as is the case with all development testing. Stay tuned for more information on the next target test date and time.

 

Upcoming Boca Chica road closures

Dec. 9: 0900 - 1800 Eastern

Dec. 10: 0800 - 1830 Eastern

Dec. 11: 0800- 1830 Eastetn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • You can't remove Safari though. Or almost any other bundled app for that matter, and pretty much all of them are useless to me (and there are is a heap of them compared to Windows). I'll much rather take Edge than Safari, at least it can be highly customized vs. Safari. I'll take a PC with ten Edges over a Mac any day though as I can't stand all the limitation and painfully frustrationg restriction that make me dislike their stuff with a burning passion, iOS included (especially iOS).
    • DVD only? What kind of self-respecting optical disk backup/ripping tool doesn't support Blu-ray these days? I burned all my DVDs like 15+ years ago...
    • ...but you're Johnny, from Australia?    
    • Glow 26.9 by Razvan Serea Glow provides detailed reporting on every hardware component in your computer, saving you valuable time typically spent searching for CPU, motherboard, RAM, graphics card, and other stats. With Glow, all the information is conveniently presented in one clean interface, allowing you to easily access and review the comprehensive hardware details of your system. Glow provides detailed information on various system aspects, including OS, motherboard, processor, memory, graphics card, storage, network, battery, drivers, and services. The well-organized format ensures easy access to the required information. You can export all the gathered data to a plain text file, facilitating sharing with others for troubleshooting purposes. No installation needed. Just decompress the archive, launch the executable, and access computer-related information. Glow runs on Windows 11 and Windows 10 64-bit versions. Glow 26.9 changelog: New Features The processor hardware detection engine has been significantly enhanced beyond traditional Intel and AMD architectures. Native support is now available for modern platforms such as Apple Silicon (M-Series) and the newly introduced NVIDIA Spark. In addition, all ARM-based processors can now be accurately distinguished between ARM32 and ARM64 architectures, providing precise hardware reporting. This marks a major milestone for Glow's hardware detection capabilities. The RAM manufacturer identification algorithm has been expanded. JEDEC vendor codes for popular brands such as Patriot, PNY, Team Group, GeIL, Lexar (Longsys), and Asgard/Gloway have been integrated into the database. This significantly reduces the likelihood of incorrect or "Unknown Manufacturer" results and improves overall hardware detection accuracy. New Public IP Address and Internet Service Provider (ISP) features have been added to the Network section. To ensure reliability, this information is retrieved from the trusted service ipwho.is. When Hiding Mode is enabled, no requests are sent and these features remain hidden, as they may expose sensitive information. The search engine used in the Installed Drivers, Installed Services, and Installed Applications sections has been enhanced. You can now perform more flexible and accurate searches using initials, partial matches, and loosely arranged character sequences. The TS Preloader loading bar has been rebuilt using our modern TS Custom Controls graphics library, developed entirely in-house. As a result of this infrastructure upgrade, the loading bar now features smooth rendering and rounded corners that align with the visual style of Windows 11. [TS Updater] A new validation algorithm has been added to check whether the target application is currently running before the update process begins. Bug Fixes Resolved a condition that could prevent TS Preloader from shutting down safely during rare application crash scenarios. Fixed a text alignment issue in the Network section affecting the display of DNS addresses. Alignment is now rendered correctly. [TS Updater] Fixed an issue that could prevent the updated application's executable "*.exe" file from being located after the update process. [TS Updater] Fixed a bug that could leave outdated "*.sha256" files in the application directory after an update. [TS Updater] Fixed a rare issue that could cause subfolders to be moved into the root directory after an update. [TS Updater] Fixed an issue during the first launch that could cause flickering and a temporary white window appearance due to Windows Defender interactions. Changes A small improvement has been made to the internet connectivity detection algorithm. Connectivity checks are now performed in the background with minimal impact on the user interface thread. The keyboard shortcuts in the top menu have been reorganized and simplified to provide a consistent experience across all Türkaysoft applications and to avoid potential conflicts with standard Windows shortcuts. The TS Preloader splash image has been updated with a Türkiye-themed stadium design to celebrate Türkiye's qualification for the 2026 FIFA World Cup—its first appearance in 24 years. Congratulations, Türkiye! The TS Custom Controls module has been updated to version 26.6, delivering improved stability and a more polished visual appearance. [TS Updater] The application icon has been redesigned to provide a more modern and refined look. Note: Always unzip the program before using it. Otherwise you may get an error. Download: Glow 26.9 | 1.8 MB (Open Source) Links: Glow Homepage | Screenshot | Github Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      504
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      +Edouard
      75
    4. 4
      Skyfrog
      74
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!