Recommended Posts

That was immense. Looked like it lost a raptor going up then another near the landing. The green at the end was probably it trying to relight that lost one. Looked slow enough to land so maybe a legs issue too?

5 minutes ago, warwagon said:

What looks slow, is not so slow when it's something that big and heavy.

True, it’s hard to tell it’s speed and how far it was from the ground when the videos are from miles away.

 

17 minutes ago, anthdci said:

That was immense. Looked like it lost a raptor going up then another near the landing. The green at the end was probably it trying to relight that lost one. Looked slow enough to land so maybe a legs issue too?

 

17 minutes ago, IsItPluggedIn said:

Looks like they lost one at the end it was trying to relight but failed.

T-0 about 1745 Eastern

 

The ascent engine cutoffs were planned, otherwise it's go too high as fuel burns made it lighter. The RUD landing was because of low header (landing) tank pressures. 

 

OTOH, the skydiver maneuver and flip worked like a charm.

 

Screenshot_2020-12-09-17-51-51-350.thumb.jpeg.cb2a6a87b72981792aeb170fb794cadf.jpeg

 

 

 

  • Like 2

Wow, that was an unbelievable first attempt.  I can't believe how stable it was during the belly flop, and how close it was to landing.  Seems like SN9 needs only a slight adjustment.  Exciting progress!

  • Like 2

So anyone care to speculate on the low pressure? Are we talking something they can adjust for next time or perhaps a redesign so we're not likely to see SN9 rolling out any time soon?

I assume the header tanks were probably full so it's not going to be as simple as just putting more propellant in there? Maybe a chilling issue where it's boiling off too quickly? Maybe just a simple plumbing issue due to the forces generated on the flip.

 

I'd love SpaceX to include telemetry on the next one.

 

Aside from all of that, honestly it blew my mind watching that, I was just waiting at every step for something to go wrong. When the first engine went and there was a little jerk I thought for sure that was an engine loss so was waiting for them to trigger an abort. Then the second one went and the rocket just seemed to hover and I thought ok now this is defiantly an abort, they may have attempted with 2 raptors to land (that was always the plan anyway right?) providing they still had the two raptors they needed but when it just sort of hovered on one for quite some time I was just waiting for the boom.

 

Then comes the flip, OK maybe they'll abort part way down or let it crash into the sea and my god did it seem to fall slowly. There were times where I thought the video had frozen it looked so still and stable.

It wasn't until it started to drop below the cloud cover and you could see it looked to be over the pad did I start to believe it might actually make it. 

I don't know if this is right but I'm not sure the landing legs deployed but that could have just been due to the higher velocity and it not having enough time but that thing came unbelievably close.

  • Like 1
9 hours ago, spacelordmaster said:

The crash seems to have been caused by the landing rockets failure to slow the ship down. It was coming down too fast it seems.

The landing is fed by two header tanks, not the mains.

 

The methane header is between the two mains, and the oxygen header is in the top of the nose for balance reasons. Each tank is pressurized to help push the liquid methane or oxygen into the lines & engines before the engine pumps start.

 

Apparently what happened was the methane tank pressure wasn't high enough, causing low power & a hot oxygen rich burn. Hot oxygen eats metal, so the engines cooked.

 

Here's a video showing the header tanks,

 

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Windows 95 offered the ability to add and edit the right click menus, on a per file type basis. This feature seems to be missing in the new file explorer. Are they bringing it back as a "new" feature?
    • It's nearly time to replace my aging Founders Edition 3080, it doesn't OC as nicely as it used to and it's running around 10c warmer than it did when I first bought it.  I don't have budget for much more than what I spent on the 3080 and locally, that means the best GPU I can manage is a 9070XT. On this basis I have a few questions: 1. At present I don't use ray tracing, if this was to change, would this GPU be an issue? 2. How does it compare on a performance basis? 3. Are the drivers worse or better than those for nVidia? 4. Linux support, is it there? 5. Anything else I should be aware of if I were to make this change? 6. Is it a good idea or shall I try and keep the 3080 a little longer.
    • What OS is that? It looks a bit like Mac OS but the command line suggests it isn't, either way I like it!
    • Outlook classic is inherently better than new outlook, for a number of reasons. That said, if the only reason people need office is to read email, they should just use thunderbird.
    • Windows 11 is a big thumbs down from me. I used for a period of a few days while it was in insider and windows 10 was the main OS, and realised it wasn't for me. I am still waiting for Windows to be tolerable again, a shame as at one point I was very pro Microsoft.  
  • Recent Achievements

    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Steven P.
      74
    4. 4
      FloatingFatMan
      69
    5. 5
      +Edouard
      69
  • Tell a friend

    Love Neowin? Tell a friend!