Recommended Posts

That was immense. Looked like it lost a raptor going up then another near the landing. The green at the end was probably it trying to relight that lost one. Looked slow enough to land so maybe a legs issue too?

5 minutes ago, warwagon said:

What looks slow, is not so slow when it's something that big and heavy.

True, it’s hard to tell it’s speed and how far it was from the ground when the videos are from miles away.

 

17 minutes ago, anthdci said:

That was immense. Looked like it lost a raptor going up then another near the landing. The green at the end was probably it trying to relight that lost one. Looked slow enough to land so maybe a legs issue too?

 

17 minutes ago, IsItPluggedIn said:

Looks like they lost one at the end it was trying to relight but failed.

T-0 about 1745 Eastern

 

The ascent engine cutoffs were planned, otherwise it's go too high as fuel burns made it lighter. The RUD landing was because of low header (landing) tank pressures. 

 

OTOH, the skydiver maneuver and flip worked like a charm.

 

Screenshot_2020-12-09-17-51-51-350.thumb.jpeg.cb2a6a87b72981792aeb170fb794cadf.jpeg

 

 

 

  • Like 2

Wow, that was an unbelievable first attempt.  I can't believe how stable it was during the belly flop, and how close it was to landing.  Seems like SN9 needs only a slight adjustment.  Exciting progress!

  • Like 2

So anyone care to speculate on the low pressure? Are we talking something they can adjust for next time or perhaps a redesign so we're not likely to see SN9 rolling out any time soon?

I assume the header tanks were probably full so it's not going to be as simple as just putting more propellant in there? Maybe a chilling issue where it's boiling off too quickly? Maybe just a simple plumbing issue due to the forces generated on the flip.

 

I'd love SpaceX to include telemetry on the next one.

 

Aside from all of that, honestly it blew my mind watching that, I was just waiting at every step for something to go wrong. When the first engine went and there was a little jerk I thought for sure that was an engine loss so was waiting for them to trigger an abort. Then the second one went and the rocket just seemed to hover and I thought ok now this is defiantly an abort, they may have attempted with 2 raptors to land (that was always the plan anyway right?) providing they still had the two raptors they needed but when it just sort of hovered on one for quite some time I was just waiting for the boom.

 

Then comes the flip, OK maybe they'll abort part way down or let it crash into the sea and my god did it seem to fall slowly. There were times where I thought the video had frozen it looked so still and stable.

It wasn't until it started to drop below the cloud cover and you could see it looked to be over the pad did I start to believe it might actually make it. 

I don't know if this is right but I'm not sure the landing legs deployed but that could have just been due to the higher velocity and it not having enough time but that thing came unbelievably close.

  • Like 1
9 hours ago, spacelordmaster said:

The crash seems to have been caused by the landing rockets failure to slow the ship down. It was coming down too fast it seems.

The landing is fed by two header tanks, not the mains.

 

The methane header is between the two mains, and the oxygen header is in the top of the nose for balance reasons. Each tank is pressurized to help push the liquid methane or oxygen into the lines & engines before the engine pumps start.

 

Apparently what happened was the methane tank pressure wasn't high enough, causing low power & a hot oxygen rich burn. Hot oxygen eats metal, so the engines cooked.

 

Here's a video showing the header tanks,

 

 

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • People in the '50s and '60s had the same attitude, and we're still here over a half century later.
    • So after some fiddling I was able to get it to run at a pretty stable 30FPS. I'm slightly surprised about how much fiddling I had to do to get there though given what I thought was reasonable hardware: Processors: 16 × AMD Ryzen 7 7840HS w/ Radeon 780M Graphics Memory: 16 GiB of RAM Graphics Processor 1: AMD Radeon 780M Graphics Graphics Processor 2: AMD Radeon RX 7700S I think I could do it better if I use Linux rather than Windows, Windows RAM usage is stupid without stripping the system down. But once I got it working in a reasonable state, it was so awesome! I felt like a new Bond! If anyone has any advice to get things going a bit smoother FPS-wise, I'd appreciate it.
    • Something is rotten in the state of Denmark Australia
  • Recent Achievements

    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      70
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!