Recommended Posts

Starship OFT

No FAA launch license yet, but FAA working docs show, 

Date: NET April 17 

Backups: April 18 - 21

Window (all dates): 0800 - 1105 Eastern

And...Starship will grow ~10m longer and have 6 RVac engines instead of 3, 9 engines total. A beast.

 

 

No wet dress rehearsal, straight to launch flow after they get the license.

++++++++++

Quote

A live webcast of the flight test will begin ~45 minutes before liftoff. As is the case with all developmental testing, this schedule is dynamic and likely to change, so be sure to stay tuned to our social media channels for updates.

As we venture into new territory, we continue to appreciate all of the support and encouragement we have received from those who share our vision of a future where humanity is out exploring among the stars!

20230411_163144.thumb.jpg.9f4a2e6335fb9a99f7775347378545fb.jpg

Flight maneuvers

StarshipOFTflightpath1.thumb.jpg.ab2302a1081da7712e8b11bb11cb4003.jpg

Remember this is a test launch, and most first launches do not end well.

If it goes boomski at some point and the pad survives, Booster 9 and another Ship are waiting in the wings. This could be like the Falcon 9 landing tests all over again, but bigger bada booms.

  • Like 1
On 11/04/2023 at 19:33, DocM said:

Remember this is a test launch, and most first launches do not end well.

If it goes boomski at some point and the pad survives, Booster 9 and another Ship are waiting in the wings. This could be like the Falcon 9 landing tests all over again, but bigger bada booms.

I remember how the starship ALMOST stuck the landing on it's first attempt.

I think the launch will do pretty well.  I'd be surprised if we set a RUD, but maybe we'll see a few scrubs at ~T-0.
They've slowed down their pace pretty dramatically and are probably being super cautious since they have NASA contracts on the line.  The last thing they want to do is rebuild the ship, pad, and have to write a bunch of failure analysis paperwork.

On 12/04/2023 at 16:57, Astra.Xtreme said:

I think the launch will do pretty well.  I'd be surprised if we set a RUD, but maybe we'll see a few scrubs at ~T-0.
They've slowed down their pace pretty dramatically and are probably being super cautious since they have NASA contracts on the line.  The last thing they want to do is rebuild the ship, pad, and have to write a bunch of failure analysis paperwork.

same, I think it'll get to orbit and I think the booster will do the return pretty well. They have a lot of experience of doing that with boosters. I think the ship will breakup on re-entry, probably due to a tile, they have a lot less experience getting something so big to slow down enough.

  • Like 1
On 12/04/2023 at 14:11, anthdci said:

same, I think it'll get to orbit and I think the booster will do the return pretty well. They have a lot of experience of doing that with boosters. I think the ship will breakup on re-entry, probably due to a tile, they have a lot less experience getting something so big to slow down enough.

That's a good point.  Seems like every static fire resulted in a waterfall of tiles falling off, so I have to imagine some will shake loose from the launch.  I'm curious how many they can lose before it compromises the whole ship.

Let's hope we get some awesome live camera feeds of both stages.  Even if either stage burns up, let's hope we get to watch that fiery ride the whole way!

On 12/04/2023 at 11:57, Astra.Xtreme said:

I think the launch will do pretty well.  I'd be surprised if we set a RUD, but maybe we'll see a few scrubs at ~T-0.
They've slowed down their pace pretty dramatically and are probably being super cautious since they have NASA contracts on the line.  The last thing they want to do is rebuild the ship, pad, and have to write a bunch of failure analysis paperwork.

Rebuilding boosters & ships isn't a problem, they have several under construction. Keeping the pad intact this is the important part. How it survives will inform the final assembly of KSC's LC-39A Starship launch table. That tower is already stacked.

Booster 9/Ship 25 are almost ready to go as soon as Booster 7/Ship 24 are off the pad. Booster 8 was scrapped, and Booster 9 is a major upgrade. 

On 12/04/2023 at 15:15, bguy_1986 said:

How long will it be from launch until the ship comes down?  Will they orbit multiple times or just going to bring it down before it makes a full orbit around the earth?

 

Assuming all goes well and it doesn't splash into the Gulf of Mexico, it'll reach orbitable velocity but only do a partial orbit,  then it will splash down just northwest of Kauai, Hawaii in the US Pacific Missile Range.

The US military will keep people out, and NASA will be sending up two  of their WB-57 Canberra recon aircraft. These are equipped with telescopic infrared cams to observe launch,  reentry, etc.

  • Thanks 1
On 12/04/2023 at 15:33, Astra.Xtreme said:

That's a good point.  Seems like every static fire resulted in a waterfall of tiles falling off, so I have to imagine some will shake loose from the launch.  I'm curious how many they can lose before it compromises the whole ship.

>

 

Being tied down to a test stand creates more intense vibration loads than if the vehicle were actually launched, some reflected upward from the ground, so it's more likely for tiles to fall off than in actual flight. Also, during a real launch the Ship will be 70-80m higher above the ground.

On 12/04/2023 at 14:36, DocM said:

 

Being tied down to a test stand creates more intense vibration loads than if the vehicle were actually launched, some reflected upward from the ground, so it's more likely for tiles to fall off than in actual flight. Also, during a real launch the Ship will be 70-80m higher above the ground.

Definitely agreed, but I think there's still some concern for how the tiles will withstand an actual launch.  Tiles were still falling off during the small scale static fires, so a launch with 100% throttle (or whatever they throttle up to) on all engines should still be pretty violent.  We'll learn some things if it makes it all the way to splashdown.

Side note, is there a "simulated" Starlink payload in the Starship for this launch?   Maybe that's outside of the scope, but an empty ship certainly isn't ideal data.

Edited by Astra.Xtreme
On 12/04/2023 at 15:51, Astra.Xtreme said:

Definitely agreed, but I think there's still some concern for how the tiles will withstand an actual launch.  Tiles were still falling off during the small scale static fires, so a launch with 100% throttle on all engines should still be pretty violent.  We'll learn some things if it makes it all the way to splashdown.

That's why they do test flights. Where the tiles fall off will inform if/where they need High Temp RTV adhesive in addition to the clips.

On 12/04/2023 at 20:57, DocM said:

That's why they do test flights. Where the tiles fall off will inform if/where they need High Yemp RTV adhesive in addition to the clips.

I wonder if/where they will be mounting cameras that look back at the ship so they can see what state the tiles are in before re-entry. 

On 12/04/2023 at 15:59, anthdci said:

I wonder if/where they will be mounting cameras that look back at the ship so they can see what state the tiles are in before re-entry. 

 

They have cameras and antennae all over that ship, I think 5 or 6 Starlinks to keep the imagery flowing. After July's Polaris Dawn mission tests its use on Crew Dragon, they may add Starlink laser interlink comms to Starship.

Polaris Dawn will also be going as high as 1,400 km and do spacewalks using SpaceX's new EVA spacesuit. This will beat Gemini 11s LEO altitude record.

On 14/04/2023 at 12:09, DocM said:

Starship launch

FAA TFRs* issued for Monday, April 17 and Tuesday, April 18. 

Window: 0800 - 1105 Eastern

* Temporary Flight Restriction, keeping air traffic out of the launch zone & track.

yay!

On 14/04/2023 at 15:02, Astra.Xtreme said:

Hopefully the FAA license comes through today.  Let's light this candle!

 

Starship launch license granted

Link...

and,

SpaceX may leasing KSC's  Vehicle Assembly Building (VAB) High Bay 1 for a  Starship staging area. 

Link...

 

Starship Orbital Flight Test (OFT) 

Date: Monday, April 17

Backup dates: April 18 - 22

Window: 0800 - 1105 Eastern (1200 - 1505 UT)

Pad: Starbase Pad 1

Vehicles: Booster 7, Starship 24

Recovery: water landings

Mission: the first 3 Starship flights will be basic flight tests, vehicles expended & hoping they don't wreck the pad. After clearing the pad, measuring actual physical & thermal loads, discovering problems which can't be found on the ground. 

Webcast begins ~45 min before liftoff

 

 

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • WildBit Viewer 6.20 released; no further updates planned by Razvan Serea WildBit Viewer is a popular, fast, and extensive image viewer offering a comprehensive suite of tools for photographers, designers, and image enthusiasts. It includes a powerful Viewer, Slide Show, Editor, Search, Profile Switcher, and Multi-Screen Viewer. The Viewer provides blazing-fast folder, file list, and thumbnail navigation with customizable headers, full-screen view, and a shell toolbar to organize favorite folders. It supports all major graphic formats (over 70), including JPEG, TIFF, PNG, BMP, GIF, PCX, TGA, and RAW formats. Detailed Image Info shows EXIF, IPTC, and XMP metadata, with rotation based on EXIF orientation, wallpaper setting, image comparison, geo-tag viewing, color labels, and CMS-aware color management. The Slide Show module offers 176 transition effects, multi-monitor support, custom shows with per-image settings, image marking, zoom, rotate, and desktop hiding for a professional viewing experience. The Editor supports advanced image manipulation, including crop, resize, color adjustments, curves, edge detection, effects, batch processing, retouching, layer support, and printing. Users can apply mass renaming, update or clear metadata, and work with multi-page TIFFs and animated GIFs. Search allows filtering by name, location, date, size, attributes, and metadata, while the Profile Switcher saves and loads custom layouts for all modules. The Multi-Screen Viewer opens multiple windows on available monitors, allowing simultaneous image viewing with independent zoom, pan, and rotation. WildBit Viewer also supports portable operation, 32- and 64-bit versions, Unicode, high-DPI displays, and multiple Windows styling options. With its combination of speed, versatility, and rich feature set, WildBit Viewer is an indispensable tool for managing, editing, and showcasing images efficiently. WildBit Viewer key features: Blazing-fast folder, file list, and thumbnail browsing Supports 70+ image formats including JPEG, TIFF, PNG, BMP, GIF, and RAW Full-screen view with multi-monitor support Explorer-style file handling with customizable headers Thumbnail Browser with sorting, view change, and fast size adjustment EXIF, IPTC, and XMP metadata viewing and editing Automatic rotation based on EXIF orientation Shell toolbar for organizing favorite folders Image Compare to calculate similarity between images Mass renaming and batch metadata updates File List Generator (HTML, CSV, RTF, TXT, Unicode) Rating and color labels, CMS-aware color management Video playback (AVI, MPG, MPEG, WMV) Animated GIF, multipage TIFF, Camera RAW support Slide Show with 176 transition effects and custom settings Editor: crop, resize, rotate, flip, canvas resize, and retouching tools Batch processing and image format conversion Multi-Screen Viewer: multiple windows with independent zoom, pan, and rotate Profile Switcher: save, load, reset, delete module profiles Portable operation, 32-/64-bit support, Unicode, and high-DPI ready WildBit Viewer 6.20 changelog: Viewer, Slide Show, Editor, Search, Profile Switcher & Multi Screen Viewer. Updated ImageEn to 15.0.0 version. Viewer, Slide Show, Editor, Search, Profile Switcher & Multi Screen Viewer. Updated Jedi JCL&JVCL. Viewer - Image Geo Info, OpenStreetMap removed. Slide Show Remote Mode removed. Note! This means that WildBit Slide Show Remote is now officially EOL. Editor - Shortcut keys for Capture removed. Optimized code. Note! This version includes help what supersedes all previous releases. plus Lots of bug fixes and changes, check Readme files for details. WildBit Viewer End‑of‑Life WildBit Viewer has reached its final release with version 6.20. As development comes to a close, no further feature updates are planned. WildBit Slide Show Remote reached End-of-Life on 06 June 2026, while WildBit Viewer will reach End-of-Life on 30 June 2026. Downloads will remain available until the end of July 2026 (possibly extending into early August). After End-of-Life, the software will no longer receive updates, security fixes, or technical support. Download: WildBit Viewer 64-bit | Portable 64-bit | ~70.0 MB (Freeware) Download: WildBit Viewer 32-bit | Portable 32-bit Links: WildBit Viewer Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Thanks for liking it! 😊 That's Arch Linux with Gnome.
    • LOL. Can't even quote and edit a comment correctly. Figures you're a Linux user.
    • It won't perform hugely better than the 3080 unless you're VRAM limited in games. Have you tried putting new thermal pads on them 3080 and giving it a good clean to see if you can regain your temps and overclock?
  • Recent Achievements

    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      252
    3. 3
      Steven P.
      71
    4. 4
      FloatingFatMan
      69
    5. 5
      +Edouard
      69
  • Tell a friend

    Love Neowin? Tell a friend!